Abstract:Wall-bounded turbulence is relevant for many engineering and natural science applications, yet there are still aspects of its underlying physics that are not fully understood, particularly at high Reynolds numbers. In this study, we investigate fully-developed turbulent pipe flows at moderate-to-high friction velocity Reynolds numbers ($361 \leq Re_{\tau} \leq 2,000$), corresponding to bulk velocity-based Reynolds numbers of $11,700 \leq Re_{b} \leq 82,500$, using wall-modeled Large Eddy Simulations (LES) in OpenFOAM. A grid convergence study is performed for $Re_{\tau} = 361$, followed by an investigation of the accuracy of various subgrid-scale stress models for the same Reynolds number. Results show that the Wall-Adapting Local Eddy (WALE) model performs well compared to experiments and Direct Numerical Simulations (DNS), while One-Equation Eddy-Viscosity Model (OEEVM) and Smagorinsky (SMG) are too dissipative. LES utilizing WALE are then performed for four different Reynolds numbers with gradually refined grids, revealing excellent agreement with DNS data in the outer region. However, a significant deviation from DNS data is observed in the sub-viscous layer region, indicating the need for further mesh refinement in the wall-normal direction to accurately capture the smallest-scale motions' behavior. Additional mesh sensitivity analysis uncovered that, as the $Re_{\tau}$ value rises, it becomes crucial for a grid to adhere to the condition of $\Delta x^{+} \leq 20 - 25$ and $\Delta z^{+} \leq 10$ in order to precisely capture substantial large and small scale fluctuations. Overall, the WALE model enables accurate numerical simulations of high-Reynolds-number, wall-bounded flows at a fraction of the computational cost required for temporal and spatial resolution of the inner layer.

Large eddy simulation of high reynolds number plow in fluid machinary

Constrained Large Eddy Simulation of Wall-Bounded Turbulent Flows

Large Eddy Simulation of Turbulent Flows Passage of Reversible Runner

Large Eddy Simulations of Turbulent Pipe Flows At Moderate-To-High Reynolds Numbers

Large eddy simulations of turbulent pipe flows at moderate Reynolds numbers

Large eddy simulation of transient turbulent flow in Francis turbine

Large-eddy simulation of the flow past a cylinder with Re=3 900

A hybrid immersed boundary/wall-model approach for large-eddy simulation of high-Reynolds-number turbulent flows

Finite Element Analysis of Turbulent Flows Using Les and Dynamic Subgrid-Scale Models in Complex Geometries

Large eddy simulation of flows around a square cylinder

Reynolds Stress Constrained Large Eddy Simulation of Separation Flows in a U-duct

Application of Large Eddy Simulation to an Oscillating Flow Past A Circular Cylinder

Large eddy simulation of silt-laden two-phase flow through a hydraulic turbine runner

Large eddy simulation based on an improved high-precision interior penalty discontinuous Galerkin method: flow past cylinders and airfoils

Turbulent Flow Simulation Using Large Eddy Simulation Combined with Characteristic-Based Split Scheme

Large Eddy Simulations for 3D Turbine Blades Using a High Order Flux Reconstruction Method

Large eddy simulation of free surface turbulent channel flow with heat transfer

Reynolds-constrained Large-eddy Simulation : Sensitivity to Constraint and Subgrid-scale Models

Large Eddy Simulation of a High Reynolds Number Turbulent Jet in Crossflow

Large-Eddy Simulation of Stratified Channel Flow

Large Eddy Simulation of Flow Field in Vector Flow Clean-Room