Creep aging behavior of Al-Cu-Mg-Si alloy with elastic and plastic loads
Lihua Zhan,Wenfang Yu,Yongqian Xu,Chunhui Liu,Bolin Ma,Kai Chen,Beizhen Su,Shugen Luo,Keyuan Xia,Xiaobo Yang
DOI: https://doi.org/10.1016/j.matchar.2022.112132
IF: 4.537
2022-09-01
Materials Characterization
Abstract:The creep deformation, age hardening response and microstructural evolution of an Al-Cu-Mg-Si alloy under different stress levels from elastic to plastic loading have been systematically studied by creep aging test, tensile test, transmission electron microscopy and X-ray diffraction. It was found that the creep behavior of this alloy within elastic loads exhibit a multi-stage creep feature, which is related to the formation of solute atmosphere and solute-depleting mechanism. When stress loading exceeds the yield strength of the alloy, a two-stage creep behavior with the significantly increase in primary creep stage has been presented. The aging precipitation behavior varies greatly under different loads. Preferentially formed Q′phase was found in the elastic load creep aging process, while the plastic load creep aging precipitation process dominated by θ′ phase. Detailed microstructure analysis reveals that the initial dislocations induced by plastic load accelerate the formation of θ′ phases, and further restrain the precipitation of Q′ phases due to the existence of a competitive relationship between the two type precipitates. The θ′ phases with stress orientation effect and the performance under plastic load is more obvious. This contributes to the strength loss of the creep-aged alloy, especially under plastic load levels. Moreover, the dislocation density before the creep aging process affect the aging precipitation sequence of the Al-Cu-Mg-Si alloy, leading to the significant difference in the creep behavior under the elastic and plastic loads.
materials science, multidisciplinary,metallurgy & metallurgical engineering, characterization & testing