Abstract:The influence of minor Ag on the precipitation evolution of the Al-4.2Zn-2.8Mg-1.0Cu (wt.%) alloy from early stages to over-aged stages at 150 °C was investigated. Surprisingly, co-precipitation of strengthening phases T′ and η′ are found in both Ag-free and Ag-added alloys. With Ag addition, precipitation of both T′ and η′ is refined and increased, such that the age-hardening capabilities and peak-aged tensile strength are improved. In addition, the quantitative proportion of η′ precipitates increases with the increase of Ag content due to the increase in the (Zn+Cu)/Mg ratio of nucleating particles. The narrowed precipitate-free zones (PFZs) are considered responsible for the undiminished fracture elongation in Ag-added alloys. Essentially, these effects of Ag are closely related to the strong Ag-vacancy and Ag-solute interactions. In over-aged stages, the Ag-added alloys still possess higher hardness values compared to the Ag-free alloy, which is related to precipitate coarsening mechanisms. The Ag-free alloy follows classical coarsening behavior by solid solution mediated diffusion, while the Ag-added alloy follows two possible coarsening mechanisms, coalescence of aggregates and diffusion of atoms. The smaller average size and higher residual number density of precipitates benefited from the slow diffusion-controlled coarsening behavior depending on the precipitate composition characteristics of the two-stage differentiation and the precipitate distribution characteristics of high-density dispersion in early-aged stages could explain why the hardness of Ag-added alloy keeps at a higher level than that of Ag-free alloy even after 1000 h ageing. Meanwhile, the transformation of metastable phases to stable phases is inhibited due to the addition of Ag, such that GP zones, T′, η′, η and T phases coexist even after 14 d of ageing. In terms of phase composition, the addition of Ag decreases the ratio of Mg/(Al+Zn) in T-type phase. For the Ag-added alloy, the sum concentration of Zn+Mg in η′ phase is about 10 at.% higher compared to T′ phase, and η phase continues to have a high sum concentration of Zn+Mg, besides, the Zn/Mg ratio and Cu concentration exhibit obvious differences from T phase.

Effects of small additions of Mg, and Ag on precipitation process of Al-Cu-Li-(Mg)-(Ag)-Zr alloys

Influence of Mg, Ag and Zn minor solute additions on the precipitation kinetics and strengthening of an Al-Cu-Li alloy

Effects of Li Content on Precipitation in Al-Cu-(Li)-Mg-Ag-Zr Alloys

Microalloying roles of Mg and Zn additions in 2099 Al-Li alloy

Influences of Mg content on the microstructures and mechanical properties of cast Al–2Li–2Cu–0.2Zr alloy

Effect of Ag addition on the age hardening and precipitation behavior in an Al-Cu-Li-Mg-Zn-Mn-Zr alloy

Effect of Ti Addition on the Microstructure and Mechanical Properties of Cast Mg-Gd-Y-Zn Alloys

Effects of Cu content on the precipitation process of Al–Zn–Mg alloys

Precipitation Evolution of Al-Zn-Mg-Cu-(Ag) Alloys with a Low Zn/Mg Ratio

On the Role of Ag Additions on the Initial Solute Hardening and Competitive Precipitation of Al-Cu-Mg Alloys

Alloying Role of Trace Mg and Ag Element in Al-5.8Cu-0.3Mn Alloy

Revisiting the effect of Ag additions on Ω precipitation and heat resistance of Al–Cu–Mg–Si–Ag alloys

Significant roles of minor Mg addition in microstructural evolution and mechanical properties of cast Al–3Li–2Cu-0.15Zr alloy

Revealing the Substantial Impact of Trace Mg Addition on the Microstructural Configuration of a Cast Al-Li-Cu-Zr Alloy under Various Conditions

Influence of Mg content on ageing precipitation behavior of Al-Cu-Li-x alloys

Effect of Mg content on Cu precipitation behavior in Al-Cu-Mg ternary alloy by molecular dynamics simulation

Effect of combined addition of Ag and Cu on the precipitation behavior for an Al-Mg-Si alloy

Regulation of precipitation behavior among T1, S', and θ' phases in Al–Cu–Li-(Mg–Ag) alloys by optimizing Ag/Mg ratios

Effects of Trace Silver and Magnesium on the Microstructure and Mechanical Properties of Al−Cu−Li Alloys

Effect of minor Ag addition on microstructures and properties of Al-Mg-Cu-Li alloy with low Cu/Mg ratio

Mechanism for enhanced precipitation strengthening due to the addition of copper to Al-Zn-Mg alloys with high Zn/Mg ratio