Abstract:The structure and surface acidity of TS-1 were adjusted by heat treatment, in order to increase its selectivity for propylene oxide (PO) in epoxidation of propylene with H2O2. The TS-1 samples, treated at different temperatures (540, 650 and 750 degreesC) in the presence of different media(vapor or air), were characterized by XRF, XRD, FT-IR, UV-Vis, MAS NMR and NH3-TPD, to determine the changes of their framework structure, surface acid sites and total amount of acid. Using propylene epoxidation as a probe, the influence of the treatment conditions on their selectivity for PO was investigated. The results show that, with the treatment temperature increasing, the Bronsted acid sites and the total amount of acid decrease obviously, the selectivity for PO, especially over TS-1 sample treated at 750 degreesC in the presence of vapor, increases from 29% to 56%, while the catalytic activity remains constant. The amount of framework aluminum in TS-1 has changed after heat treatment, it decreases with treatment temperature increasing, especially in the presence of vapor. It can be concluded that the decrease in surface acidity of TS-1 is due to the removal of framework aluminum when TS-1 was treated at high temperature; while the decrease in surface acidity of TS-1 leads to the selectivity for PO increase. The Si-O tetrahedron is partly destroyed at high temperatures, and the framework titanium may convert into non-framework titanium, which further can be sintered to form anatase TiO2. The decrease in the amount of non-framework titanium in the presence of vapor shows that the presence of vapor favors to remove non-framework titanium of TS-1.

Synthesis of TS-1 in TPABr-TEAOH system and its characterization and catalytic performance

Synthesis of titanium silicalite (TS-1) from the TPABr system and its catalytic properties for epoxidation of propylene

Epoxidation of Propylene with Dilute H 2 O 2 over Titanium Silicalite Containing Trace Aluminum

Characterization and Catalytic Performance of Ts-1 after Heat Treatment in Different Media

Low-Cost Synthesis of Titanium Silicalite-1 (TS-1) with Highly Catalytic Oxidation Performance through a Controlled Hydrolysis Process

Synthesis of Titanium Silicalites in Different Template Systems and Their Catalytic Performance

Studies on the TS-1 Zeolites Synthesized by Tetrapropylammonium Bromide As Template

Enhanced Catalytic Oxidation by Hierarchically Structured TS-1 Zeolite

SYNTHESIS OF TS-1 ZEOLITE Ⅰ. 29Si and 1H High-Resolution NMR Investigation on the Hydrolysis of Tetraethyl Orthosilicate

Synthesis of Titanium Silicalite-1 with Small Crystal Size by Using Mother Liquid of Titanium Silicalite-1 As Seed

Synthesis of TS-1 Molecular Sieves Using Mixed Silicon Sources and Their Catalytic Performance for Removing Thiophene

IMPROVEMENT ON RAW MATERIALS AND SYNTHESIS METHOD OF TS-2

TS-1 Synthesis Via Subcrystal Aggregation: Construction of Highly Active Hydrogen-Bonded Titanium Species for Alkene Epoxidation.

Synthesis of High-Performanced Titanium Silicalite-1 Zeolite at Very Low Usage of Tetrapropyl Ammonium Hydroxide

Synthesis of TS-1 macro-nanosheets with improved catalytic performance in alkene epoxidation

Effect of organic amines during synthesis of titanium silicalite

Effect on the introduction of hollow structure on Au/TS-1 to improve the stability for propylene epoxidation

Liquid–Liquid Microdispersion Method for the Synthesis of TS-1 Free of Extra-Framework Ti Species

Studies on the crystallization process of titanium silicalite-1 (TS-1) synthesized using tetrapropylammonium bromide as a template

Synthesis, characterization and catalytic performance of titanium silicalite-1 prepared in micellar media