Abstract:A fully integrated polycarbonate (PC) microchip for CE with end-channel electrochemical detection operated in an amperometric mode (CE-ED) has been developed. The on-chip integrated three-electrode system consisted of a gold working electrode, an Ag/AgCl reference electrode and a platinum counter electrode, which was fabricated by photo-directed electroless plating combined with electroplating. The working electrode was positioned against the separation channel exit to reduce post-channel band broadening. The electrophoresis high-voltage (HV) interference with the amperometric detection was assessed with respect to detection noise and potential shifts at various working-to-reference electrode spacing. It was observed that the electrophoresis HV interference caused by positioning the working electrode against the channel exit could be diminished by using an on-chip integrated reference electrode that was positioned in close proximity (100 pm) to the working electrode. The CE-ED microchip was demonstrated for the separation of model analytes, including dopamine (DA) and catechol (CA). Detection limits of 132 and 164 nM were achieved for DA and CA, respectively, and a theoretical plate number of 2.5 x 10(4)/m was obtained for DA. Relative standard deviations in peak heights observed for five runs of a standard solution containing the two analytes (0.1 mM for each) were 1.2 and 3.1% for DA and CA, respectively. The chip could be continuously used for more than 8 h without significant deterioration in analytical performance.

A New Amperometric Detector Cell for Capillary Zone Electrophoresis

An Electrochemical Cell for the Capillary Electrophoresis with End-Column Amperometric Detection

A New Conductivity Detector for Capillary Electrophoresis

A new dual-electrode and dual-channel electrochemical detection system for capillary electrophoresis

A New Dual-Electrode And Multi-Channel Electrochemical Detection System For Capillary Electrophoresis

An On-Column Miniature Conductivity Cell and a Photocouple Separator for Conductivity Detection by Capillary Electrophoresis

An End-Channel Amperometric Detector for Microchip Capillary Electrophoresis

Simple Amperometric Detector for Microchip Capillary Electrophoresis, and Its Application to the Analysis of Dopamine and Catechol

Fabrication of A Poly(Dimethylsiloxane)-Based Electrochemiluminescence Detection Cell for Capillary Electrophoresis

Fabrication and Performance of A Three-Dimensionally Adjustable Device for the Amperometric Detection of Microchip Capillary Electrophoresis

Studies on vertical amperometric detector for capillary electrophoresis

Design of an End-Column Amperometric Detection System in Capillary Electrophoresis (CE)

A New Capillary Electrophoresis Apparatus with Piezoelectric Ceramics High Voltage Source and Amperometric Detector

Study On Conductivity Detection For Capillary Electrophoresis - Design Of A New Type Of Miniature Conductance Cell

[The Application of Multi-Pulse Stripping Amperometric Detection to Capillary Electrophoresis].

A high-performance polycarbonate electrophoresis microchip with integrated three-electrode system for end-channel amperometric detection.

An Apparatus of Capillary Electrophoresis with End - Column Wall - Jet Amperometric Detection

Microchip Capillary Electrophoresis With An End-Channel Amperometric Detector And Its Preliminary Application

Miniaturized Ce System Based on Amperometric Detection and Horizontal Sampling

An integrated capillary electrophoresis-amperometric detection chip with replaceable and quasi-self-aligned working electrode

Study On The Optimization Of Coupling Forms Between Capillary And Electrode In Capillary Electrophoresis With Amperometric Detection