Abstract:The working range of hydrocarbon fuel has gradually expanded to high pressure/high temperature conditions above the critical point with the proposal of "dual carbon" strategy. The calculation accuracy of fuel thermophysical properties in the power systems has become a major difficulty. In this study, the density, internal energy, enthalpy, entropy, thermal conductivity and viscosity of n -dodecane molecular system were calculated using the SKS-UA force field in the isothermal-isobaric (NPT) ensemble via molecular dynamics (MD) simulations in the range of temperatures from 298 K to 2000 K and pressures from 1.2773 atm to 3000 atm. Three modification methods in terms of stability modification, kernel density estimation (KDE) modification and zero potential energy surface modification were proposed to improve the calculation accuracy. Average absolute relative deviation (AARD) and standard error (SE) were employed to perform error and uncertainty analysis on existing and non-existent thermophysical properties data of n -dodecane, respectively. The results indicated that the modified results for the six thermophysical properties are better than the original ones. The modified density, internal energy, enthalpy, entropy, and thermal conductivity were in good agreement with the experimental values, while the viscosity is underestimated at low temperature. The change in thermophysical properties was enormous near the critical point. Among the conditioned factors, pressure had a greater impact on density and thermal conductivity, while internal energy, enthalpy and entropy were more sensitive to temperature. Viscosity changed significantly when the temperatures were below the critical point. This modification method offers high-precision calculation results, inspiring the prediction of thermophysical properties over a wide temperature and pressure range.

Measurement and prediction of thermal conductivities of alkane binary mixtures

Densities and Viscosities of Binary Mixtures of Methyl 4-Chlorobutyrate with Aromatic Hydrocarbons at T = (298.15 to 318.15) K

MEASUREMENT AND CALCULATION ON THERMAL CONDUCTIVITY FOR BINARY SYSTEMS OF ALCOHOLS WITH 1,2-DICHLOROETHANE AND WITH CYCLOHEXANONE

Molecular Dynamics Simulation on Solidification Process of N-Hexadecane Systems

Measurements on vapor pressure and thermal conductivity for pseudo-binary systems of a hydrocarbon fuel with ethylene and diethylene glycol dimethyl ethers

Mixing Properties of Tris(2-ethylhexyl) Phosphate with Alkanes at Different Temperatures and Data Treatment Using Several Correlation Equations Based on Eyring's Absolute Reaction Theory

Thermal conductivity measurements for n-hexane and n-heptane at elevated temperature and pressure

Measurement of the Thermal Conductivities of Toluene, Cyclohexane, and Diethyl Ether at Pressures up to 15.1 MPa and Their Binary Mixtures at Pressures 0.1 and 10.1 MPa from 291 to 351 K

Density, Viscosity, and Freezing Point for Four Binary Systems of N-Dodecane or Methylcyclohexane Mixed with 1-Heptanol or Cyclohexylmethanol

Thermal conductivity calculations of binary liquid organic mixtures by molecular dynamics simulation and its interpretation of microscopic heat transfer mechanism

Densities and Viscosities of the Ternary Mixtures of Decalin (1) + n-Hexadecane (2)+1-Butanol (3) and Corresponding Binary Systems

Volumetric Properties of Binary Systems of Straight-chain Alkanes+JP-10

Prediction of the Thermal Conductivity of H2/CO2/CO/CH4/H2O Mixtures at High Temperatures and High Pressures Based on the Extended Corresponding States Principle

Densities, Viscosities, Refractive Indices, and Surface Tensions of Binary Mixtures of 2,2,4-Trimethylpentane with Several Alkylated Cyclohexanes from (293.15 to 343.15) K

Simultaneous measurement of the density and viscosity for n-Decane + CO2 binary mixtures at temperature between (303.15 to 373.15) K and pressures up to 80 MPa

Density and Viscosity Measurements on the Ternary System of Exo-Tetrahydrodicyclopentadiene (1) + N-Decane (2) + Iso-Butanol (3) and Corresponding Binary Systems

Density, refractive index, viscosity, and surface tension of binary mixtures of exo -tetrahydrodicyclopentadiene with some n -alkanes from (293.15 to 313.15) K

Thermophysical properties of n -dodecane over a wide temperature and pressure range via molecular dynamics simulations with modification methods

Experiment Investigation on the Liquid Thermal Conductivity of Biodiesel + Diesel Fuel Blends

Measurement and Modeling of the Densities for Co2 + Dodecane System from 313.55 K to 353.55 K and Pressures Up to 18 Mpa

Measurement of Thermal Conductivity for Systems of Methyl Ethyl Ketoxime with Methyl Ethyl Ketone and N-Hexane Separately