Abstract:The solid circulation pattern, the voidage profile, and the jet penetration height have been investigated experimentally and computationally in a cold-flow model of jetting fluidized beds (JFBs) of a binary mixture in this paper. This rectangular two-dimensional bed is 0.30 m wide and 2.05 m high with a central jet and a conical distributor, which roughly stands for the ash-agglomerating fluidized-bed coal gasifier. A video camera and coloured particle tracer method were employed to explore the fluid dynamics in the bed. In terms of the average physical properties of binary mixtures, a hydrodynamic model describing the gas–solid flow characteristics in a jetting bed is resolved by using a modified Semi-Implicit Method for Pressure-Linked Equation (SIMPLE) algorithm. This paper focuses on three features of the fluid dynamics—solid circulation pattern, voidage profile, and jet penetration height. The solid circulation pattern is composed of three regions: the jetting region, the bubble street, and the annular region. Above the central nozzle the time-averaged isoporosity contours are almost elliptic, while near the walls of the bed, the voidage in high solid concentration region is approximately equal to that at the minimum fluidization state. The jet penetration height increases with increasing jet gas velocity and with decreasing average particle diameter. The increase in weight percentage of the lighter component in the binary system reveals that reduction of average density causes the enlargement of jet penetration height. The simulated results show good agreement with the experimental data.

A two-fluid model and its verification in gas-solid fluidized reactors: II. Analysis of flow field in a two-dimensional jetting fluidized bed composed of single-component particle

Novel Bubble–Emulsion Hydrodynamic Model for Gas–Solid Bubbling Fluidized Beds

Two-fluid model and its verification of gas-solid fluidized reactors: IV. Bubble behavior in a Two-dimensional jetting fluidized bed composed of single-component particle

Numerical Simulations of Flow Structure and Heat Transfer in a Central Jet Bubbling Fluidized Bed

A Volatile Spray Zone Model and Experimentation in a Gas-Solid Fluidized Bed with Liquid Injection

Simulation of fluidized bed using two-fluid model

Modeling and numerical simulation of gas-solid jet in the transitional-rarefied regime

Numerical Simulation and Verification of a Gas-Solid Jet Fluidized Bed

The Numerical Method for Simulations Gas Solid Fluidization System

Particle-scale Simulation of Fluidized Bed with Immersed Tubes

Particle-motion-resolved discrete model for simulating gas–solid fluidization

Cfd Model of Dense Gas-Solid Systems in Jetting Fluidized Beds

Numerical Simulation for Fluid Dynamics in a Gas-solid Fluidized Bed

Experimental and Numerical Study of Fluid Dynamic Parameters in a Jetting Fluidized Bed of a Binary Mixture

Bubble Formation in a Multi-Jet Fluidized Bed

Mathematical simulation of porosity distributions in two-dimensional jetting-fluidized beds containing mono-component

A Rigorous Model for the Simulation of Chemical Reaction in Gas-Particle Bubbling Fluidized Bed: I. Modeling and Validation

Research Progress in Numerical Models on Gas-Solid Fluidization of Cohesive Particles

Modeling, numerical methods, and simulation for particle-fluid two-phase flow problems

Modeling of gas-solid two-phase flow using kinetic theory

CFD Simulation of Jet Behaviour and Voidage Profile in a Gas–solid Fluidized Bed