Abstract:Development of methods for controlling the change in the functional cover and the energy composition of the surface of detonation synthesis diamond nanopowders is necessary to create stable suspensions and materials from them. The aim of this work is to study changes in the electrokinetic and electrophysical characteristics of the powder as a result of the modification of detonation synthesis diamond nanopowders using a liquid-phase thermochemical treatment. Diamond nanopowders of grades ASUD-75 - ASUD-99 with different sp2-hybridization carbon content, manufactured at the V.I. Bakul National Academy of Sciences of Ukraine from the product of detonation synthesis of diamond from the company "ALIT" (Zhytomyr) investigated. Diamond nanopowders of ASUD-90 grade after their modification by means of liquid-phase thermochemical treatment using: a melt of alkalis, a mixture of nitric and sulfuric acids, a mixture of chromic and sulfuric acids were investigated by electrophoresis using a device "Dzeta-potential-analizer" company "Mikromeritiks". Electrokinetic characteristics of diamond nanopowders: the magnitude and sign of the electrokinetic potential, electrophoretic mobility are determined. The methods were used to study the physicochemical characteristics of nanopowders: electrical resistivity, carbon content of sp2-hybridization, mass fraction of impurities in the form of an incombustible residue, and specific surface area. In this work, it was established by electrophoresis that the value of the electrokinetic potential and electrophoretic mobility of the powder decrease by 2-10 times with a decrease in the mass fraction of sp2-hybridization carbon from 23.6 to 0 wt%. Using the ASUD-90 nanopowder as an example, it is shown that the modification of the nanopowder by the liquid-phase method using thermochemical treatment with mixtures of oxidants leads to a decrease in the values of electrophoretic mobility by 1.1-7.5 times and electrokinetic potential by 1.1-7.3 times. It was found by dielectric measurement that the tangent of the dielectric loss angle of diamond nanopowders of grades ASUD-90 - ASUD-99 is in the range 0.3046 - 0.3146. Modification of the ASUD-90 grade nanopowder using a liquid-phase thermochemical treatment leads to a change in the interval of the dielectric loss tangent, namely 0.2450-0.3249. According to the degree of increase in the ratio of the dielectric loss tangent from 0% humidity to 100% humidity, the methods for modifying nanopowders can be arranged as follows: modifying using a melt of alkalis (ASUD-90-1 sample, S = 12.8%) <mixture of chromic and sulfuric acids (sample ASUD-90-3, S = 13.8%) <mixture of nitric and sulfuric acids (sample ASUD-90-2, S = 20.8 %).

Study on purification and properties of ultrafine diamond prepared by explosive technique

Nano-polycrystalline diamond formation under ultra-high pressure

Synthesis of Nano-Polycrystalline Diamond under High Pressure and High Temperature

Synthesizing bulk polycrystalline diamond by method of direct phase transition

Determination of Non-Combustible Impurities in Detonation Diamond Nanopowder

Ultracentrifugation for ultrafine nanodiamond fractionation

Nano-Graphite Synthesized by Explosive Detonation and Its Application in Preparing Diamond under High-Pressure and High-Temperature

[Studies on nano-diamond prepared by explosive detonation by Raman and infrared spectroscopy]

Diamond Micropowder Synthesis Via Graphite Etching in a Microwave Hydrogen Plasma

Deposition and Characterization of Ultra-Smooth Nanocrystalline Diamond Films Using a Graphite-Grid Assisted Hot Filament CVD Method

Structure formation of ultradispersed diamond by detonation synthesis

Synthesis of diamond using nano-graphite and Fe powder under high pressure and high temperature

The effect of modification diamond nanopowders detonation synthesis to change their electrokinetic and electrophysical characteristics

Investigation on Using Nanometric-Graphite As Carbon Source with Fe Powder for Diamond Synthesis under High-Temperature and High-Pressure

Diamond synthesized by using natural flake graphite without sulfur

Study on the Polycrystalline Mechanism of Polycrystalline Diamond Synthesized from Graphite by Direct Detonation Method

Deagglomeration of polycrystalline diamond synthesized from graphite by shock-compression

A simple and soft chemical deaggregation method producing single-digit detonation nanodiamonds

Salt-coated air oxidation nanodiamond surface purification with a photoluminescence spectroscopy quality control

Ultra-smooth single crystal diamond surfaces resulting from implantation and lift-off processes

Sub-4 nm Nanodiamonds from Graphene-Oxide and Nitrated Polycyclic Aromatic Hydrocarbons at 423 K