Abstract:In the planar flow casting process of amorphous strips, the flow behavior of molten metal and the inclusion content in the crucible are crucial to the morphology and magnetic properties of the material. This study conducts a comparative analysis of the effects of non-immersed and immersed funnels, as well as various funnel structures, on the fluid flow and inclusion removal efficiency in the crucible by integrating numerical and physical models. The findings reveal that for the same pouring flow rate, the diameter of the liquid column in non-immersed pouring conditions is smaller than that of the funnel outlet, leading to a faster injection flow velocity. As a result, the melt in the crucible is subjected to severe impacts, accompanied by an increased possibility of slag entrapment. Conversely, immersed pouring substantially reduces the velocity of the molten metal at the funnel outlet, thereby extending the residence time in the crucible and diminishing the volume of the dead zone. Additionally, the molten metal backflows due to the negative pressure formed in the inner chamber of the funnel. The design of a trumpet-shaped funnel increases the effective volume while reducing the height of the backflow fluid, consequently reducing the velocity of the molten metal at the funnel outlet and prolonging the residence time. Compared to the conventional pouring process with the non-immersed funnel, the outlet velocity is reduced from 1.1 m/s to 0.12 m/s by adopting the immersed funnel with an inverted trapezoidal trumpet structure. This reduction results in a stable flow state, a 9.69% reduction in the dead zone volume fraction, and a 22.96% increase in average inclusion removal efficiency. These improvements demonstrate that a crucible funnel with a well-designed structure and the implementation of an immersion process can significantly improve the metallurgical effects in the planar flow casting process.

Numerical Simulation of the Convection During Acrt

Numerical Analysis of 3D Eddy Current Fields in a Cold Crucible

Numerical Simulation of Gases over Flat Plate Using Two-Temperature Nonlinear Coupled Constitutive Relations

Numerical Study of ACRT in the THM Growth of CdZnTe Crystals

Numerical Simulation of the Melting of Solid Particles in Thermal Convection with a Modified Immersed Boundary Method

Numerical Analysis for Electromagnetic Field Influence on Heat Transfer Behaviors in Cold Crucible Used for Directional Solidification

Numerical Simulation of Convection in the Two-Phase Zone of a Binary Alloy

Numerical Calculation of Flow Field Inside TiAl Melt During Rectangular Cold Crucible Directional Solidification

Numerical analysis on Hg1−xCdxTe growth by ACRT-VBM

Numerical simulation of combined flow in Czochralski crystal growth

Experimental and Numerical Investigation on Mass Transfer Induced by Electromagnetic Field in Cold Crucible Used for Directional Solidification

Effect of Pouring Techniques and Funnel Structures on Crucible Metallurgy: Physical and Numerical Simulations

Numerical analysis of thermohydraulic behavior in a directional solidification furnace

Numerical analysis of Cd1−xZnxTe crystal growth by the vertical Bridgman method using the accelerated crucible rotation technique

Numerical Simulation for Conjugated Problems of Conduction, Convection and Radiation in an Annular Space

Effect of the Accelerated Crucible Rotation Technique on Dendritic Growth Morphology

Numerical Study on Transverse Mixing Characteristics of Flow Sweeping in Helical Cruciform Rod Bundle

Numerical analysis of simulant effect on natural convection characteristics in corium pools

CFD Simulations of the Air/Water Two-phase Flow in an Annular Centrifugal Contactor

Efficient Melt Stirring Induced by the Coupled Effects of Alternating Magnetic Field and Configuration of Cold Crucible

Numerical Simulation of Unsteady Flows in Czochralski Crystal Growth by Lattice Boltzmann Methods