XPS investigation of X-Al2O3 supported Pt-containing dual-component catalysts

Jifei Jia,Yuan Kou,Zhusheng Xu,Xiqing Zhang,Bing Zhang,Liwu Lin

IF: 16.5

1997-01-01

Chinese Journal of Catalysis

Abstract:null

What problem does this paper attempt to address?

Isobutane dehydrogenation and Pt LIII-edge XAFS studies on γ-Al2O3 supported Pt-containing catalysts *

Jifei Jia,Liwu Lin,Yuan Kou,Zhusheng Xu,Tao Zhang,Jianzhong Niu,Longya Xu

DOI: https://doi.org/10.1016/S0167-2991(98)80495-3

1998-01-01

Abstract:γ-Al 2 O 3 supported Pt-containing catalysts have been investigated by Isobutane dehydrogenation and XAFS analyses. The results indicated that Pt species is highly dispersed on the γ-Al 2 O 3 support for the γ-Al 2 O 3 supported Pt-containing catalysts after reduction. Pt is in amorphous metallic state, and no alloy of Pt-Sn or Pt-Fe was formed after reduction for the Pt-Sn/γ-Al 2 O 3 and Pt-Fe/γ-Al 2 O 3 catalysts. Pt anchored γ-Al 2 O 3 support via promoter-SnO or FeO, which resulted in an enhanced dehydrogenation performance for the both catalysts.
Pt Lm-edge xanes and exafs studies on γ-Al2O3 supported pt catalysts

Jifei Jia,Yuan Kou,Liwu Lin,Zhusheng Xu,Xiqing Zhang,Jianzhong Niu,Dongbai Liang

1998-01-01

Reaction Kinetics and Catalysis Letters

Abstract:Pt LIII-edge XANES and EXAFS were employed to investigate the nature of Pt/γ-Al2O3, Pt-Sn/γ-Al2O3 and Pt-Fe/γ-Al2O3 catalysts. The results indicated that Pt species on these catalysts were all in the oxidized states before reduction, and in the metallic states after reduction. The dispersity of the Pt species on the catalysts was very high after reduction. The electronic properties of the highly dispersed Pt species were different from that of the bulk Pt in large crystallites. An interaction between Pt and the metal-oxide modified γ-Al2O3 support is proposed. The interaction improved the dispersity of the Pt species on the catalysts and is thought to be the reason for the enhanced activity and selectivity for dehydrogenation reactions over these catalysts. © Akadémiai Kiadó, All rights reserved.
Pt L III -edge XANES and EXAFS studies on γ-Al 2 O 3 supported Pt catalysts

Jifei Jia,Yuan Kou,Liwu Lin,Zhusheng Xu,Tao Zhang,Jianzhong Niu,Dongbai Liang

DOI: https://doi.org/10.1007/BF02475417

1998-01-01

Reaction Kinetics and Catalysis Letters

Abstract:Pt L III -edge XANES and EXAFS were employed to investigate the nature of Pt/γ-Al 2 O 3 , Pt−Sn/γ-Al 2 O 3 and Pt−Fe/γ-Al 2 O 3 catalysts. The results indicated that Pt species on these catalysts were all in the oxidized states before reduction, and in the metallic states after reduction. The dispersity of the Pt species on the catalysts was very high after reduction. The electronic properties of the highly dispersed Pt species were different from that of the bulk Pt in large crystallites. An interaction between Pt and the metal-oxide modified γ-Al 2 O 3 support is proposed. The interaction improved the dispersity of the Pt species on the catalysts and is thought to be the reason for the enhanced activity and selectivity for dehydrogenation reactions over these catalysts.
Investigation on Co Catalytic Oxidation Reaction Kinetics of Faceted Perovskite Nanostructures Loaded with Pt

S. M. Yin,J. J. Duanmu,Y. H. Zhu,Y. F. Yuan,S. Y. Guo,J. L. Yang,Z. H. Ren,G. R. Han

DOI: https://doi.org/10.1039/c6ra24713j

IF: 4.036

2017-01-01

RSC Advances

Abstract:Perovskite lead titanate nanostructures with specific {111}, {100} and {001} facets exposed, have been employed as supports to investigate the crystal facet effect on the growth and CO catalytic activity of Pt nanoparticles.
Dispersion and support dictated properties and activities of Pt/metal oxide catalysts in heterogeneous CO oxidation

Jiaojiao Song,Yixuan Yang,Shoujie Liu,Lei Li,Nan Yu,Yuteng Fan,Zhiming Chen,Long Kuai,Baoyou Geng

DOI: https://doi.org/10.1007/s12274-021-3443-7

IF: 9.9

2021-05-04

Nano Research

Abstract:The source of activity of metal/metal oxides has always been an interesting, important but highly challenging research topic in heterogeneous catalysis. In CO oxidation reaction, this work clarifies dispersion and support dictated activities of Pt including single-atom (Pt1), 2.8 nm (PtNP-S) and 36 nm (PtNP-L) Pt supported on both reducible TiO2 and “inert” Al2O3 supports. The X-ray absorption fine structure (XAFS) shows that chemical state of Pt is affected by both dispersion and support: Pt1 presents fully oxidized state in both Pt1/TiO2 and Pt1/Al2O3; PtNP-S in PtNP-S/TiO2 appear nearly oxidized state while about half of Pt is metallic state in PtNP-S/Al2O3; PtNP-L in both PtNP-L/TiO2 and PtNP-L/Al2O3 exhibit metallic state. All the Pt species supported on TiO2 present much lower apparent activation barriers (Eapp) than that on Al2O3. Moreover, Pt1/TiO2 possesses dozen times of efficiency than PtNP-S/TiO2 although they have similar Eapp values. A truth is finally made clear that a reducible metal oxide with low oxygen vacancy formation energy is critical to endow Pt/metal oxide a high activity and the single-atom dispersion of Pt is the way to maximize the active sites of Pt/metal oxide.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Studies on n-butane isomerization reaction on solid oxide super acid Pt-SO4 2- /ZrO2-Al2O3 catalysts

Zhanlin Xu,Lina Zhao,Liang Wang,Yuling Zhang,YingLi Bi

2005-01-01

Abstract:The composite solid oxide super acid Pt-SO4 2- /ZrO2-Al2O3 catalyst was prepared, and its structure, surface properties and catalytic activities for n-butane isomerization reaction were investigated by XRD, XPS, SEM, FT-IR. The results showed that the optimum A12O3 loading in the catalyst made ZrO2 tetragonal phase stable, prevented the transformation of ZrO2 from tetragonal phase to monoclinic phase. Pt doping on SO 4 2- /ZrO2-Al2O3 improved the catalytic activities for n-butane isomerization reaction. When the content of Al was 1.5% in the catalyst, the yield of i-butane was 37%, and its selectivity reached 70% above.
Pd-Pt Catalysts on Fluorinated Alumina Support Studied by X-Ray Absorption Fine Structure

Wensheng Yan,Zhongrui Li,Zheng Wei,Shiqiang Wei

DOI: https://doi.org/10.1063/1.2644641

2007-01-01

AIP Conference Proceedings

Abstract:A series of bi‐metallic Pd‐Pt catalysts supported on both pristine and fluorinated alumina supports were investigated with x‐ray absorption spectroscopy. It was found that Pd and Pt form small alloy particles on the pristine alumina support; the composition and the cluster size of the PdPt bimetallic alloys, and the electronic properties of the metals were significantly altered on the fluorinated support. The remarkable increase in sulfur tolerance of the PdPt metallic clusters supported on the fluorine pretreated alumina can be attributed to an electronic depletion of the metals, large particle size and direct participation of the acid sites in the reaction.
Interface modulation of Pt/Al2O3 catalyst and their roles in thermal stability

Changjin Xu,Yinglei Liu,Baljeet Singh,Shiyuan Yi,Gaowu Qin,Song Li

DOI: https://doi.org/10.1016/j.surfin.2022.102276

IF: 6.2

2022-10-01

Surfaces and Interfaces

Abstract:Interfacial local environment of noble metal nanoparticles (NPs) and support is crucial for the development and design of thermally and chemically stable noble metal heterogeneous catalysts. The unique chemical environment can strengthen the NPs interaction with the support surface, which can effectively avoid the agglomeration of NPs. The strategy is developed to modulate the interfacial chemical environment of supported Pt NPs with the help of the unsaturated Al3+ in Al2O3N (nanobelt) support, resulting in a sintering-resistant Pt/Al2O3N catalyst. Al solid-state MAS NMR characterization shows that Al2O3N support contains a large amount of unsaturated Alpenta3+ (about 22.6%). XAS confirms that Pt NPs deposited on the surface of Al2O3 with rich unsaturated pentahedral coordinated Al3+ sites have a unique coordination structure at the interface (more Pt-O coordination). When catalyzing the CO oxidation as a probe reaction, the catalytic activity and the particle sizes of Pt NPs do not change significantly even after the reaction at 400 °C for 15 days, and the complete CO conversion temperature increases only by 40 °C when the catalyst is screened at 600 °C for 5 days. This work demonstrates a new strategy to develop stable large-scale anti-sintering noble metal-based heterogeneous catalysts for many important high-temperature industrial applications.

chemistry, physical,physics, applied, condensed matter,materials science, coatings & films
In Situ XANES Study of Methanol Decomposition and Partial Oxidation to Syn-Gas over Supported Pt Catalyst on SrTiO3 Nanocubes

Hui Wang,Junling Lu,Christopher L. Marshall,Jeffrey W. Elam,Jeffrey T. Miller,HongBo Liu,James A. Enterkin,Robert M. Kennedy,Peter C. Stair,Kenneth R. Poeppelmeier,Laurence D. Marks

DOI: https://doi.org/10.1016/j.cattod.2014.02.008

IF: 5.3

2014-01-01

Catalysis Today

Abstract:A catalyst of Pt nanoparticles was prepared by atomic layer deposition on SrTiO3 nanocuboids and tested for methanol decomposition and partial oxidation. The catalyst had uniform nanoparticle size of 1.58 +/- 0.37 nm and a Pt (1 1 1) surface. In situ X-ray absorption near-edge spectroscopy (XANES) measured in a temperature-programmed reduction showed that the Pt particles were easily reduced. However, the as-received catalyst, a reduced catalyst, and an oxidized catalyst all had catalytic activity, differing slightly in methanol conversion and product selectivity. In situ XANES also revealed that CO adsorbed on the Pt sites was the only observed surface species during both methanol decomposition and partial oxidation. It seemed that the breakage of CH and OH bonds overwhelmingly occurred once methanol was adsorbed, forming H-2 and adsorbed CO. The latter was then released from the catalyst surface or was oxidized to CO2 when O-2 was present. (C) 2014 Elsevier B.V. All rights reserved.
O 2-TPD-MS properties of supported Pd-CuO/γ-Al 2O 3 bimetallic catalysts

XiaoYuan Jiang,Renxian Zhou,Mengfei Luo,Xiaoming Zheng

1998-01-01

Abstract:XRD,TPD-MS and a microreactor-GC system were used to study the reducibility, surface oxygen desorption and recovery ability of Pd-CuO/γ-Al 2O 3 bimetallic catalysts. Experimental results show that due to the interaction between Pd and CuO in the bimetallic catalyst,the surface dispersion state of the active component has changed a great deal. In addition,different Pd/CuO ratio has different oxidation activity for the oxidation of CO and CH 4. By adjusting and changing the ratio of active component,it is possible to improve the surface oxygen desorption and recovery ability of catalysts,thereby increase the catalytic oxidation activity.
X‐ray standing wave characterization of the strong metal–support interaction in Co/TiOx model catalysts

Atul Tiwari,Matteo Monai,Ksenia Matveevskii,Sergey N. Yakunin,Laurens D. B. Mandemaker,Martina Tsvetanova,Melissa J. Goodwin,Marcelo D. Ackermann,Florian Meirer,Igor A. Makhotkin

DOI: https://doi.org/10.1107/s1600576724001730

IF: 4.868

2024-04-01

Journal of Applied Crystallography

Abstract:X‐ray standing waves on a thermally stable periodic multilayer have been used to evidence the partial coverage of Co nanoparticles by a titanium oxide support in a model catalyst, following high‐temperature reduction. The developed approach has potential for fundamental studies in thermally activated surface processes in catalysis, membranes and metallurgy.The strong metal–support interaction (SMSI) is a phenomenon observed in supported metal catalyst systems in which reducible metal oxide supports can form overlayers over the surface of active metal nanoparticles (NPs) under a hydrogen (H2) environment at elevated temperatures. SMSI has been shown to affect catalyst performance in many reactions by changing the type and number of active sites on the catalyst surface. Laboratory methods for the analysis of SMSI at the nanoparticle‐ensemble level are lacking and mostly based on indirect evidence, such as gas chemisorption. Here, we demonstrate the possibility to detect and characterize SMSIs in Co/TiOx model catalysts using the laboratory X‐ray standing wave (XSW) technique for a large ensemble of NPs at the bulk scale. We designed a thermally stable MoNx/SiNx periodic multilayer to retain XSW generation after reduction with H2 gas at 600°C. The model catalyst system was synthesized here by deposition of a thin TiOx layer on top of the periodic multilayer, followed by Co NP deposition via spare ablation. A partial encapsulation of Co NPs by TiOx was identified by analyzing the change in Ti atomic distribution. This novel methodological approach can be extended to observe surface restructuring of model catalysts in situ at high temperature (up to 1000°C) and pressure (≤3 mbar), and can also be relevant for fundamental studies in the thermal stability of membranes, as well as metallurgy.

chemistry, multidisciplinary,crystallography
Advanced XPS-Based Techniques in the Characterization of Catalytic Materials: A Mini-Review

Yuanyuan Cui,Yifan Liao,Youbao Sun,Wenchang Wang,Jinqi Wu,Weilin Dai,Taohong Huang

DOI: https://doi.org/10.3390/catal14090595

IF: 3.9

2024-01-01

Catalysts

Abstract:X-ray photoelectron spectroscopy (XPS) technology is extensively applied in the field of catalysts, offering deep insights into their electronic structures and chemical composition. The development of advanced techniques based on XPS instrumentation allows for a deeper and more holistic exploration of the characteristics of catalytic materials. This mini-review introduces and summarizes the primary applications of XPS-based analysis methods, including ion scattering spectroscopy (ISS) for analyzing single atomic layers, angle-resolved XPS, high energy X-ray sources and argon ion sputtering, each providing different depths of information about a sample. It also summarizes the use of inert atmosphere transfer devices and high-temperature reactors for quasi in situ monitoring as well as the integration of in situ techniques, including light irradiation XPS, to study catalysts’ behavior under realistic conditions.
In situ investigation of oxidation across a heterogeneous nanoparticle-support interface during metal support interactions

Abheek Datta,Shubham Deolka,Pawan Kumar,Zakaria Ziadi,Toshio Sasaki,Stephan Steinhauer,Vidyadhar Singh,Nan Jian,Eric Danielson,Alexander James Porkovich

DOI: https://doi.org/10.1039/d0cp05697a

2021-01-28

Abstract:Interactions between oxide supports and noble metal nanoparticles (NPs) is an area of intense research interest across all fields of catalysis. Oxygen spillover, metal support interactions (MSIs) and charge transfer are among many mechanisms observed and proposed as to how NP-support interfaces assist and enhance catalysis. This work studies the migration of oxygen across the Pd NP-CuO nanowire (NW) interface and beyond. X-ray photoelectron spectroscopy (XPS) and Kelvin probe force microscopy (KPFM) found an interaction between the Pd NP and CuO NW support, via the formation of PdO at the Pd-CuO interface. It was found, through in situ irradiation at high vacuum transmission electron microscopy (TEM), that oxygen enters the Pd NP lattice from the Pd-CuO interface via amorphization of the NP. Varying the amount of irradiation highlighted the different rates of amorphization of NPs, with full amorphization of a NP leading to the formation of an epitaxially driven PdO across the NPs. Interestingly, in situ heating in XPS observed a reduction to metallic Pd, found to be similarly amorphous during TEM investigation. On comparison with Pd supported on a non-reducible substrate - in which oxidation was found to proceed from the outer surface in, rather than the support interface (resulting in a PdO shell) - it is theorized that the oxidation and reduction of Pd on CuO forms a PdO NP surface full of Pd-PdO sites allowing for synergistic effects, of great use in the oxidation and hydrogenation of organic species.
An Amorphous Approach to the Structure of a Pt–Fe/γ-Al2O3 Catalyst Characterized by XAFS

LW Lin,Y Kou,M Zou,Z Yan

DOI: https://doi.org/10.1039/b100690h

2001-01-01

Abstract:A Pt-Fe/gamma -Al2O3 catalyst has been investigated by means of Pt L-III-and Fe K-edge X-ray absorption fine structure (XAFS). X-Ray absorption near-edge structure (XANES) clearly indicates the formation of highly dispersed zerovalent Pt atoms on the surface after reduction. The iron precursor Fe2O3 is reduced to well-dispersed FeO. Six Pt neighbors at 2.72, 3.14 and 3.83 Angstrom, respectively, are found for each Pt atom on Pt/gamma -Al2O3. However, only one type of Pt neighbor, at 2.75 Angstrom with a low coordination number of 0.8, is detected for the Pt sites on Pt-Fe/Al2O3. An amorphous approach to rationalizing a possible structure of Pt-Fe/Al2O3 has been discussed at the atomic level by consideration of the surface coordinate geometry. The XAFS-derived parameters are highly commensurate with a sandwich model. An iron oxide phase with the stoichiometry Fe17O19 is present as an interface between Pt and gamma -Al2O3 while zerovalent Pt atoms are randomly distributed on the iron oxide surface as a mixture of monomers, dimers and trimers, well separated from each other.
XPS analysis of the soot oxidation characteristics with Si-Al catalyst effects

Jing HU,Zhun HU,Jun ZHANG,Shijin SHUAI

DOI: https://doi.org/10.3969/j.issn.1674-8484.2016.02.015

2016-01-01

Abstract:X-ray photoelectron spectroscopy (XPS) analysis was used to investigate effects of catalyst on soot oxidation characteristics, existing form and differences of soot and partialy oxidized soot were examined. Printex-U (PU) was used to surrogate engine soot, soot became more and more ordered crystaline structure with the temperature increasing with no catalyst added. Soot added catalyst appeared similar oxidation mechanism as wel as the microstructure with ifnish oxidation at 650℃. However, soot appeared lesser ordered crystaline structure under high oxidation temperature of 1000℃. The results show that Si-Al catalyst changes the soot oxidation mechanism under oxygen atmosphere, catalyst with ifnish oxidation at 1 000℃promotes oxidation of ordered crystaline structure which was dififcult to be oxidized.
Xps Study of Iron Catalysts for Fischer-Tropsch Synthesis

ZT LIU,YW LI,JL ZHOU,BJ ZHANG,DM FENG

DOI: https://doi.org/10.1080/08843759508947694

1995-01-01

Abstract:The surface characteristics of Fe-Cu-K catalysts were determined by X-ray photoelectron spectroscopy (XPS). The surface composition of catalysts poisoned by carbonyl sulfide (COS) was investigated by XPS and compared with the composition of unpoisoned catalyst. Sputtering with Ar+ ions was used to determine the elemental distribution of poisoned catalyst by COS as a function of depth from the surface. The results showed that the sulfur content decreased at the depth increased from the catalyst surface surface, while the iron content increased along the depth increased. FeS and FeS2 were the main phases on the poisoned catalyst surface. Only alpha-Fe2O3 was found on oxide iron catalyst. Fe3O4 was the main phase of reduced catalyst treated in H-2/CO ratio of 2.1.
X-ray photoelectron spectroscopy (XPS) for catalysts characterization

Anna Maria Venezia

DOI: https://doi.org/10.1016/s0920-5861(02)00380-2

IF: 5.3

2003-01-01

Catalysis Today

Abstract:The general principles of X-ray photoelectron spectroscopy (XPS) as applied in the field of heterogeneous catalysis are reviewed. In particular, the use of this technique in the determination of chemical and physical changes of catalysts upon exposure to gaseous molecules and upon different thermal treatments is examined. Furthermore, examples of methods useful in obtaining the dispersion of supported catalysts are described and, for this purpose, theoretical models of the particle-support distribution are also discussed. The XPS characterization of supported Pd–Ag catalysts is reported, emphasising the advantages of using XPS to investigate surface segregation processes. In the case of supported Pd/Pt bimetallic catalysts it is shown how both, Auger and photoelectron peaks, characterized by different kinetic energies, allow to get depth profile non-destructive analysis. Finally the surface behaviour of CoMo catalysts, used for hydrodesulfurization reactions, is investigated on different supports and under different pre-treatment and reaction conditions.

chemistry, physical,engineering, chemical, applied
In Situ DRIFTS Study of Single-Atom, 2D, and 3D Pt on γ-Al2O3 Nanoflakes and Nanowires for C2H4 Oxidation

Shengpan Peng,Ziran Ma,Jing Ma,Hongyan Wang,Kai Ren,Xiaodong Wu,Baodong Wang

DOI: https://doi.org/10.3390/pr10091773

IF: 3.5

2022-09-05

Processes

Abstract:Up to now, a great number of catalysts have been reported that are active in the oxidation of volatile organic compounds (VOCs). However, supported noble-metal catalysts (especially Pt-based catalysts) are still the most excellent ones for this reaction. In this study, Pt species supported on γ-Al2O3 and ranging from single-atom sites to clusters (less than 1 nm) and 1–2 nm nanoparticles were prepared and investigated for oxidizing C2H4. The Pt-loaded γ-Al2O3 nanoflakes (PtAl-NF) and Pt-loaded γ-Al2O3 nanowires (PtAl-NW) were successfully prepared. The samples were characterized using XRD, TEM, XPS, HAADF-STEM, and in situ DRIFTS. Based on in situ DRIFTS, a simple surface reaction mechanism was developed. The stable intermediates CO on single-atom Pt, subnanometer Pt particles, and fully exposed Pt clusters could be explained by the strong binding of CO molecule poisoning Pt sites. Moreover, the oxidation of C2H4 was best achieved by Pt particles that were 1–2 nm in size and the catalytic activity of PtAl-NF was better when it had less Pt. Lastly, the most exposed (110) facets of γ-Al2O3 nanoflakes were more resistant to water than the majorly exposed (100) facets of γ-Al2O3 nanowires.

engineering, chemical
In situ study of the thermal stability of supported Pt nanoparticles and their stabilization via atomic layer deposition overcoating

Eduardo Solano,Jolien Dendooven,Ji-Yu Feng,Philipp Brüner,Matthias M Minjauw,Ranjith K Ramachandran,Michiel Van Daele,Kevin Van de Kerckhove,Thomas Dobbelaere,Alessandro Coati,Daniel Hermida-Merino,Christophe Detavernier

DOI: https://doi.org/10.1039/d0nr02444a

IF: 6.7

2020-06-04

Nanoscale

Abstract:Downscaling of supported Pt structures to the nanoscale is motivated by the augmentation of the catalytic activity and selectivity, which depend on the particle size, shape and coverage. Harsh thermal and chemical conditions generally required for catalytic applications entail an undesirable particle coarsening, and consequently limit the catalyst lifetime. Herein we report an in situ synchrotron study on the stability of supported Pt nanoparticles and their stabilization using atomic layer deposition (ALD) as the stabilizing methodology against particle coarsening. Pt nanoparticles were thermally annealed up to 850 °C in an oxidizing environment while recording in situ synchrotron grazing incidence small angle X-ray scattering (GISAXS) 2D patterns, thereby obtaining continuous information about the particle radius evolution. Al2O3 overcoat as a protective capping layer against coarsening via ALD was investigated. In situ data proved that only 1 cycle of Al2O3 ALD caused an augmentation of the onset temperature for particle coarsening. Moreover, the results showed a dependence of the required overcoat thickness on the initial particle size and distribution, being more efficient (i.e. requiring lower thicknesses) when isolated particles are present on the sample surface. The Pt surface accessibility, which is decisive in catalytic applications, was analyzed using the low energy ion scattering (LEIS) technique, revealing a larger Pt surface accessibility for a sample with Al2O3 overcoat than for a sample without a protective layer after a long-term isothermal annealing.
Advanced elemental characterization during Pt-In catalyst formation by wavelet transformed X-ray absorption spectroscopy

Matthias Filez,Evgeniy A Redekop,Hilde Poelman,Vladimir V Galvita,Guy B Marin

DOI: https://doi.org/10.1021/acs.analchem.5b00109

2015-03-17

Abstract:Complementary to conventional X-ray absorption near edge structure (XANES) and Fourier transformed (FT) extended X-ray absorption fine structure (EXAFS) analysis, the systematic application of wavelet transformed (WT) XAS is shown to disclose the physicochemical mechanisms governing Pt-In catalyst formation. The simultaneous k- and R-space resolution of the WT XAS signal allows for the efficient allocation of the elemental nature to each R-space peak. Because of its elemental discrimination capacity, the technique delivers structural models which can subsequently serve as an input for quantitative FT EXAFS modeling. The advantages and limitations of applying WT XAS are demonstrated (1) before and (2) after calcination to 650 °C of a Pt(acac)2 impregnated Mg(In)(Al)Ox support and (3) after subsequent H2 reduction to 650 °C. Combined XANES, FT, and WT XAS analysis shows that the acac ligands of the Pt precursor decompose during calcination, leading to atomically dispersed Pt(4+) cations on the Mg(In)(Al)Ox support. H2 reduction treatment eventually results in the formation of 1.5 nm Pt-In alloyed nanoparticles. Widespread use and systematic application of wavelet-based XAS can potentially reveal in greater detail the intricate mechanisms involved in catalysis, chemistry, and related fields.

XPS investigation of X-Al2O3 supported Pt-containing dual-component catalysts

Isobutane dehydrogenation and Pt LIII-edge XAFS studies on γ-Al2O3 supported Pt-containing catalysts *

Pt Lm-edge xanes and exafs studies on γ-Al2O3 supported pt catalysts

Pt L III -edge XANES and EXAFS studies on γ-Al 2 O 3 supported Pt catalysts

Investigation on Co Catalytic Oxidation Reaction Kinetics of Faceted Perovskite Nanostructures Loaded with Pt

Dispersion and support dictated properties and activities of Pt/metal oxide catalysts in heterogeneous CO oxidation

Studies on n-butane isomerization reaction on solid oxide super acid Pt-SO4 2- /ZrO2-Al2O3 catalysts

Pd-Pt Catalysts on Fluorinated Alumina Support Studied by X-Ray Absorption Fine Structure

Interface modulation of Pt/Al2O3 catalyst and their roles in thermal stability

In Situ XANES Study of Methanol Decomposition and Partial Oxidation to Syn-Gas over Supported Pt Catalyst on SrTiO3 Nanocubes

O 2-TPD-MS properties of supported Pd-CuO/γ-Al 2O 3 bimetallic catalysts

X‐ray standing wave characterization of the strong metal–support interaction in Co/TiOx model catalysts

Advanced XPS-Based Techniques in the Characterization of Catalytic Materials: A Mini-Review

In situ investigation of oxidation across a heterogeneous nanoparticle-support interface during metal support interactions

An Amorphous Approach to the Structure of a Pt–Fe/γ-Al2O3 Catalyst Characterized by XAFS

XPS analysis of the soot oxidation characteristics with Si-Al catalyst effects

Xps Study of Iron Catalysts for Fischer-Tropsch Synthesis

X-ray photoelectron spectroscopy (XPS) for catalysts characterization

In Situ DRIFTS Study of Single-Atom, 2D, and 3D Pt on γ-Al2O3 Nanoflakes and Nanowires for C2H4 Oxidation

In situ study of the thermal stability of supported Pt nanoparticles and their stabilization via atomic layer deposition overcoating

Advanced elemental characterization during Pt-In catalyst formation by wavelet transformed X-ray absorption spectroscopy