Abstract:The technique of laser-generated and laser-detected Lamb waves is a powerful tool for characterizing elastic property of plates. However, the transient waveforms depend strongly on the longitudinal acoustic wavelength L and the plate thickness H. For a thick plate (bulk material), L/H≪1, a typical waveform consists of arrivals of longitudinal, shear, and surface wave pulses, if a detecting position is localized at the same side as the exciting laser beam. For a very thin plate L/H≫1, the transient waveform is characterized by the lowest Lamb wave modes, i.e., the first arrival of the spike signal from the lowest symmetric mode, and higher frequencies and the later lower frequency signal of the lowest antisymmetric mode. However, for thicker plates (H∼2.0 mm), the transient waveforms excited by a laser pulse are much more complicated, because of contributions of the higher-order Lamb wave modes, due to lower cut-off frequency. Thus, it is necessary to clarify theoretically dynamic response of the thicker composite plates for analyzing anisotropic behavior and extracting elastic constants of composite plates by fitting comparison of theory with experimental waveforms. In this paper, the theoretical and experimental studies are presented for a titanium graphite composite plate with thickness 1.44 mm, which can be modeled as transversely isotropic. The ultrasonic Lamb waves are excited by a laser pulse with an approximate duration of 10 nsec and energy of 5.7 mJ. The normal surface velocity of the ultrasonic Lamb waves are detected by a Michelson interferometer in fiber and cross fiber propagating directions for different propagating distances away from the excited laser to investigate the anisotropic property of the composite material and propagation characteristics of the ultrasonic Lamb waves. The results show that the detected waveforms consist of several Lamb wave modes and the theoretical calculations are in agreement with experiments.

Theory of Laser-Generated Transient Lamb Waves in Orthotropic Plates

Theory of laser-generated ultrasonic transient lamb waveform in orthotropic plates

Quantitative Theory for Laser-Generated Lamb Waves in Orthotropic Thin Plates

Experimental and Theoretical Analyses on Laser-Generated Transient Lamb Waves in an Orthotropic Plate

Thermoelastic Excitation of Transient Lamb Wave in an Orthotropic Thin Plate

Normal Mode Expansion Method for Laser-Generated Ultrasonic Lamb Waves in Orthotropic Thin Plates

Excitations of Thermoelastic Waves in Plates by a Pulsed Laser

Laser-Generated Transient Lamb Wave in Thin Plates

Mechanisms of Laser-Generated Ultrasound in Plates

Near-field characteristics of laser-generated transient Lamb wave in thin plates

Anisotropic Behavior Analyzed by Laser-Generated Lamb Waves for Fiber Composite Plates

Influences of Elastic and Viscous Moduli on Laser-Generated Lamb Waves in Viscoelastic Plates

Mode Analyses of Laser-Generated Transient Ultrasonic Lamb Waveforms in A Composite Plate by Wavelet Transform

Thermoviscoelastic Excitation and Propagation of Rayleigh Waves in Viscoelastic Plates by a Pulsed Laser

Numerical Simulation of Laser-Generated Lamb Wave by Finite Element Method in Thin Transversely Isotropic Laminate Composite

Thermoviscoelastic Finite Element Modeling of Laser-Generated Ultrasound in Viscoelastic Plates

Propagation of Lamb wave in the plate of microstretch thermoelastic diffusion materials

Acoustoelastic characterization of plates using zero group velocity Lamb modes

Laser-Generated Lamb Waves Propagation in Multilayered Plates Composed of Viscoelastic Fiber-reinforced Composite Materials

Modeling and Analysis of Ellipticity Dispersion Characteristics of Lamb Waves in Pre-stressed Plates

Modal displacement analyses of Lamb waves in micro/nano-plates based on the consistent couple stress theory