Progress in research on the interaction mechanism of high-power laser and materials

Jian L��,Xiaowu Ni,Anzhi He

1996-01-01

Abstract:The present situation and problems in physical mechanism research of the interaction between high power laser and materials were reviewed. The theoretical and experimental works by the authors were emphasized, and the research work which should be continued in this direction was pointed out.

What problem does this paper attempt to address?

Researches on Laser Damage Resistance of Optical Films

Cheng Yong,Lu Yimin,Tang Huang,Guo Yanlong,Huang Guojun,Liu Xu

DOI: https://doi.org/10.11884/hplpb201628.070201

2016-01-01

Abstract:Along with the development of high energy or high power lasers,especially laser weapon and lasers for controlled nuclear fusion,the laser induced damage threshold of the optical films gradually becomes the bottleneck against the development of the lasers,which is of considerable interest from the world.Laser induced damage mechanism of optical films,test flat and method for laser induced damage threshold were expatiated.The development of researches on the technologies and methods for laser damage resistance of optical films at home and abroad,which included ion beam pretreatment,ion beam or anneal treat-ment,pretest coating with the materials of high refractive index and so on,were analyzed.The pulsed laser deposition with mag-netic filter technology was emphasized in the expectation,and the atom layer deposition was advised to accelerate to develop, which supplied the theoretic base to improve the laser damage resistance of optical films to settle for current requirements.
Interaction between Laser and Liquid Material & Its application in Laser Propulsion

Li Xiuqian,Hong Yanji,Cui Cunyan,Wen Ming,He Guoqiang

DOI: https://doi.org/10.3969/j.issn.1000-372X.2006.02.010

2006-01-01

Applied laser

Abstract:The study on laser-liquid interaction progress was summarized,with attention to its application in laser propulsion.The desiderating unsolved problems and the exigent demands of further research were pointed out.
Laser-liquid interaction & its application in laser propulsion

XiuQian Li,Yanji Hong,Guoqiang He

2006-01-01

Lasers in Engineering

Abstract:Initiated by the application in laser propulsion, a study of the progress of the interaction between laser beams and liquid material was summarised. Unsolved problems and necessary for further research in the interaction between the laser beam and liquid material were underlined.
Study on design of high-power fiber fused components

REN Jian-guo,SHEN Zi-qing,ZHANG Wei-an,YANG Hua-yong

DOI: https://doi.org/10.3969/j.issn.1001-5078.2012.05.001

2012-01-01

Abstract:High-power fiber lasers have seen astonishingly rapid progress over the last decade.All-fiber laser systems are preferred for simplicity,compactness,robustness and reliability.Characterized by intrinsically low transmission loss,fused components are referred to the optimum choices.Losses can lead to catastrophic component failure due to localized heating at high power levels.The most meaningful benchmark,when considering the power handling of the component,is the capability of the component to handle optical power loss,rather than transmitted power.Design criterions of low transmission loss are described both in single-mode components and multi-mode components.Some advices about package design are proposed.
Studies on the Mechanism of Laser Acupuncture-moxibustion

Kai-lai LIANG,Qiu-shi REN,Wan-rong LI

DOI: https://doi.org/10.3969/j.issn.1005-0957.2005.07.025

2005-01-01

Abstract:Objective The article relates many years’ mechanism researches in laser acupuncture-moxibustion field.The authors summarize,from the two aspects:physical and biological mechanisms,the studies on laser acupuncture-moxibustion mechanism developed from the late period of the last century.Laser acupuncture-moxibustion mechanism is neither a simple biophvsical nor a simple biological effect of laser.It can also not be summarized as an information treatment by the action of laser on nerve cells.A point has its special structure of cells and tissues and can not be regarded as biologic tissue.It is imperatie to conduct a pertinent study.
Progress on the Interaction Between Intense Spatially Structured Light Fields and Atoms

Fang Yiqi,Liu Yunquan

DOI: https://doi.org/10.3788/gzxb20215008.0850209

IF: 0.6

2021-01-01

ACTA PHOTONICA SINICA

Abstract:With the development of ultra-fast and ultra-strong laser technology,the interaction between light and matters in the strong-field regime has been extensively studied. At the same time,the rapid development of spatial light modulation technology in classic optics provides a new degree of freedom for optical manipulation. In recent years,the combination between these two different fields,namely,driving the intense-laser-matter interaction by the spatially structured light fields,has become one of the research hotspots in strong-field science. Strong-field ionization and high-order harmonic generation are two fundamental and important physical processes in traditional strong-field community. Here,the effect of optical vortex beams in strong-field ionization and its related research progress are first introduced. Then, the latest works of gas high-order harmonic generation driven by vortex beams or cylindrical vector beams in the past decade are introduced. At last,we look ahead to the prospects of intense spatially structured laser fields in strong-field physics.
Ultrafast dynamics observation during femtosecond laser-material interaction

Baoshan Guo,Jingya Sun,YongFeng Lu,Lan Jiang

DOI: https://doi.org/10.1088/2631-7990/ab3a24

2019-09-20

International Journal of Extreme Manufacturing

Abstract:Abstract Femtosecond laser technology has attracted significant attention from the viewpoints of fundamental and application; especially femtosecond laser processing materials present the unique mechanism of laser-material interaction. Under the extreme nonequilibrium conditions imposed by femtosecond laser irradiation, many fundamental questions concerning the physical origin of the material removal process remain unanswered. In this review, cutting-edge ultrafast dynamic observation techniques for investigating the fundamental questions, including time-resolved pump-probe shadowgraphy, ultrafast continuous optical imaging, and four-dimensional ultrafast scanning electron microscopy, are comprehensively surveyed. Each technique is described in depth, beginning with its basic principle, followed by a description of its representative applications in laser-material interaction and its strengths and limitations. The consideration of temporal and spatial resolutions and panoramic measurement at different scales are two major challenges. Hence, the prospects for technical advancement in this field are discussed finally.
A Review of an Investigation of the Ultrafast Laser Processing of Brittle and Hard Materials

Jiecai Feng,Junzhe Wang,Hongfei Liu,Yanning Sun,Xuewen Fu,Shaozheng Ji,Yang Liao,Yingzhong Tian

DOI: https://doi.org/10.3390/ma17153657

IF: 3.4

2024-07-25

Materials

Abstract:Ultrafast laser technology has moved from ultrafast to ultra-strong due to the development of chirped pulse amplification technology. Ultrafast laser technology, such as femtosecond lasers and picosecond lasers, has quickly become a flexible tool for processing brittle and hard materials and complex micro-components, which are widely used in and developed for medical, aerospace, semiconductor applications and so on. However, the mechanisms of the interaction between an ultrafast laser and brittle and hard materials are still unclear. Meanwhile, the ultrafast laser processing of these materials is still a challenge. Additionally, highly efficient and high-precision manufacturing using ultrafast lasers needs to be developed. This review is focused on the common challenges and current status of the ultrafast laser processing of brittle and hard materials, such as nickel-based superalloys, thermal barrier ceramics, diamond, silicon dioxide, and silicon carbide composites. Firstly, different materials are distinguished according to their bandgap width, thermal conductivity and other characteristics in order to reveal the absorption mechanism of the laser energy during the ultrafast laser processing of brittle and hard materials. Secondly, the mechanism of laser energy transfer and transformation is investigated by analyzing the interaction between the photons and the electrons and ions in laser-induced plasma, as well as the interaction with the continuum of the materials. Thirdly, the relationship between key parameters and ultrafast laser processing quality is discussed. Finally, the methods for achieving highly efficient and high-precision manufacturing of complex three-dimensional micro-components are explored in detail.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
Thermal and Mechanical Breakage Induced by High Power Laser on Optical and Photoelectric Elements

NIU Yanxiong,ZHANG Shulian,YAO Jianquan,HUANG Feng

2007-01-01

Laser & Optoelectronics Progress

Abstract:Thermal and mechanical breakage is the key factor of laser damage on optical and photoelectric elements. The thermal-mechanical model of optical materials, optical and photoelectric elements induced by high power laser is set up based on laser-material interaction mechanism, and the transient temperature field distribution and thermal stress field induced by laser are analyzed through resolving the heat conduction equation. The numerical simulation and experimental research of laser induced thermal and mechanical breakage on K9 glass, diamond-like carbon films, glue lens and HgCdTe detector are carried out.
Advances in Study on Laser Propulsion

Hong Yanji,Li Xiuqian,Dou Zhiguo

DOI: https://doi.org/10.3321/j.issn:1000-6893.2009.11.001

2009-01-01

Abstract:More and more researchers have been showing great interest in laser propulsion for its outstanding merits,such as high specific impulse,low cost,etc. Laser propulsion research programs and their development history abroad have been introduced briefly. The latest progress of laser propulsion researches is summarized. Degree of maturation of related technologies is analyzed,such as laser,transmission control system,thermodynamic protection of nozzle,etc. The development trend of laser propulsion is discussed. The application prospect of laser propulsion is presented. The key problems that should be urgently sloved are pointed out such as the indepth study on operation mechanism of laser propulsion.
Physical and Chemical Processes and Mechanism of Pulsed Laser Ablation of Metal Oxides

党海军,秦启宗

DOI: https://doi.org/10.3969/j.issn.1007-5461.2004.02.013

2004-01-01

Abstract:Previous works on the theoretical models of pulsed laser ablation were summarized. Our recent studies of the physicochemical processes and mechanisms for pulsed laser ablation of metal oxides were briefly reviewed. A novel thermal-controlling mechanism was proposed for the pulsed laser ablation of metal oxides when the laser fluence was not very high.
Status of Study on the Effect of Laser Radiation to Water Droplet

LI Xiu-qian,HONG Yan-ji,HE Guo-qiang,CUI Cun-yan

DOI: https://doi.org/10.3969/j.issn.0253-2743.2007.04.034

2007-01-01

Abstract:Initiated by the paper"pefformance measurements of laser propulsion with liquid water spray droplets"(High Power Lasers and Particle Beams, 2006,Vol.18,No.3),based on its application in laser propulsion,the experimental and theoretical studies on the interaction of laser and water droplet were reported.Some unresolved problems have been pointed ont.Many valuable first hand information was provided for the readers of relative research field.The attrac- tive near-future applications of water droplets ablation laser propulsion in aerospace field were discussed.
Hybrid atomistic-macroscale modeling of long-time material behavior in nanosecond laser-material interaction

Lijun Zhang,Xinwei Wang

DOI: https://doi.org/10.1364/ltst.2012.mth4a.18

2012-01-01

Abstract:The thermo-physical properties and fundamental mechanism of laser ablation process in nanosecond laser-material interaction are investigated in a computational study combining molecular dynamics simulations. © 2012 OSA.
Light-Material Interactions Using Laser and Flash Sources for Energy Conversion and Storage Applications

Jung Hwan Park,Srinivas Pattipaka,Geon-Tae Hwang,Minok Park,Yu Mi Woo,Young Bin Kim,Han Eol Lee,Chang Kyu Jeong,Tiandong Zhang,Yuho Min,Kwi-Il Park,Keon Jae Lee,Jungho Ryu

DOI: https://doi.org/10.1007/s40820-024-01483-5

2024-08-26

Abstract:This review provides a comprehensive overview of the progress in light-material interactions (LMIs), focusing on lasers and flash lights for energy conversion and storage applications. We discuss intricate LMI parameters such as light sources, interaction time, and fluence to elucidate their importance in material processing. In addition, this study covers various light-induced photothermal and photochemical processes ranging from melting, crystallization, and ablation to doping and synthesis, which are essential for developing energy materials and devices. Finally, we present extensive energy conversion and storage applications demonstrated by LMI technologies, including energy harvesters, sensors, capacitors, and batteries. Despite the several challenges associated with LMIs, such as complex mechanisms, and high-degrees of freedom, we believe that substantial contributions and potential for the commercialization of future energy systems can be achieved by advancing optical technologies through comprehensive academic research and multidisciplinary collaborations.
Advanced laser-driven ion sources and their applications in materials and nuclear science

M Passoni,F M Arioli,L Cialfi,D Dellasega,L Fedeli,A Formenti,A C Giovannelli,A Maffini,F Mirani,A Pazzaglia,A Tentori,D Vavassori,M Zavelani-Rossi,V Russo

DOI: https://doi.org/10.1088/1361-6587/ab56c9

IF: 2.532

2019-12-06

Plasma Physics and Controlled Fusion

Abstract:Abstract The investigation of superintense laser-driven ion sources and their potential applications offers unique opportunities for multidisciplinary research. Plasma physics can be combined with materials and nuclear science, radiation detection and advanced laser technology, leading to novel research challenges of great fundamental and applicative interest. In this paper we present interesting and comprehensive results on nanostructured low density (near-critical) foam targets for TW and PW-class lasers, obtained in the framework of the European Research Council ENSURE project. Numerical simulations and experimental activities carried out at 100 s TW and PW-class laser facilities have shown that targets consisting of a solid foil coated with a nanostructured low-density (near-critical) foam can lead to an enhancement of the ion acceleration process. This stimulated a thorough numerical investigation of superintense laser-interaction with nanostructured near-critical plasmas. Thanks to a deep understanding of the foam growth process via the pulsed laser deposition technique and to the complementary capabilities of high-power impulse magnetron sputtering, advanced multi-layer targets based on near-critical films with carefully controlled properties (e.g. density gradients over few microns length scales) can now be manufactured, with applications outreaching the field of laser-driven ion acceleration. Additionally, comprehensive numerical and theoretical work has allowed the design of dedicated experiments and a realistic table-top apparatus for laser-driven materials irradiation, ion beam analysis and neutron generation, that exploit a double-layer target to reduce the requirements for the laser system.

physics, fluids & plasmas
Molecular Dynamics Simulation of Thermal and Thermomechanical Phenomena in Picosecond Laser Material Interaction

XW Wang,XF Xu

DOI: https://doi.org/10.1016/s0017-9310(02)00259-4

2002-01-01

Abstract:In recent years, short pulsed laser materials interaction has attracted considerable attention owing to the rapid development of short pulsed lasers and their potential applications in laser-material processing. In this work, molecular dynamics (MD) simulations are conducted to study the thermal and thermomechanical phenomena induced by picosecond laser heating. The generation and propagation of the stress wave are calculated and depicted in detail. Results of the MD simulation are compared with those obtained with an analytical solution. In addition, a temperature wave as a result of the coupling between temperature and the strain rate is observed, which propagates at the same speed as the stress wave.
Superintense laser-driven photon activation analysis

Francesco Mirani,Daniele Calzolari,Arianna Formenti,Matteo Passoni

DOI: https://doi.org/10.1038/s42005-021-00685-2

2021-08-19

Communications Physics

Abstract:Abstract Laser-driven radiation sources are attracting increasing attention for several materials science applications. While laser-driven ions, electrons and neutrons have already been considered to carry out the elemental characterization of materials, the possibility to exploit high-energy photons remains unexplored. Indeed, the electrons generated by the interaction of an ultra-intense laser pulse with a near-critical material can be turned into high-energy photons via bremsstrahlung emission when shot into a high-Z converter. These photons could be effectively exploited to perform Photon Activation Analysis (PAA). In the present work, laser-driven PAA is proposed and investigated. We develop a theoretical approach to identify the optimal experimental conditions for laser-driven PAA in a wide range of laser intensities. Lastly, exploiting the Monte Carlo and Particle-In-Cell tools, we successfully simulate PAA experiments performed with both conventional accelerators and laser-driven sources. Under high repetition rate operation (i.e. 1−10 Hz) conditions, the ultra-intense lasers can allow performing PAA with performances comparable with those achieved with conventional accelerators. Moreover, laser-driven PAA could be exploited jointly with complementary laser-driven materials characterization techniques under investigation in existing laser facilities.

physics, multidisciplinary
A Review of Research Progress on Machining Carbon Fiber-Reinforced Composites with Lasers

Junke Jiao,Xiangyu Cheng,Jiale Wang,Liyuan Sheng,Yuanming Zhang,Jihao Xu,Chenghu Jing,Shengyuan Sun,Hongbo Xia,Haolei Ru

DOI: https://doi.org/10.3390/mi14010024

IF: 3.4

2023-01-01

Micromachines

Abstract:Carbon fiber-reinforced composites are widely used in automobile, aerospace and military lightweight manufacturing due to their excellent mechanical properties such as light weight, excellent fracture resistance, corrosion resistance and wear resistance, etc. However, because of their high hardness, anisotropy and low interlayer strength characteristics, there are many problems with machine carbon fiber-reinforced composites with traditional methods. As a non-contact processing technology, laser machining technology has lots of advantages in carbon fiber-reinforced composites processing. However, there are also some defects produced in laser machining process such the heat affected zone, delamination and fiber extraction due to the great difference of physical properties between the carbon fibers and the resin matrix. To improve the quality of carbon fiber-reinforced composites laser machining, lots of works have been carried out. In this paper, the research progress of carbon fiber-reinforced composites laser machining parameters optimization and numerical simulation was summarized, the characteristics of laser cutting carbon fiber-reinforced composites and cutting quality influence factors were discussed, and the developing trend of the carbon fiber-reinforced composites laser cutting was prospected.
Preliminary Study on Hazard of Hard X-ray Radiation Produced in Interaction Between High Intensity Laser and Solid Target

Qiu Rui,Li Junli,Yang Bo

2013-01-01

Abstract:With the rapid development of laser technology,a number of high intensity laser devices are emerging in China and other countries.At the same time,the hazard induced by the radiation produced in the interaction between high intensity laser and solid target has gradually been observed and attention has been paid to this hazard.In this paper,the physical process and character of the interaction between laser with high intensity and solid target were analyzed through extensive research.The parameters of the radiation sources were discussed,including the energy conversion efficiency of laser-electronic,thermal electron energy spectrum and electron temperature,the energy spectrum of hard X-ray produced by thermal electron,etc.Then the primary assessment of the resulting X-ray dose due to the interaction between the laser and the target with the laser intensity in 1014 to 1020 W/cm2were obtained.Finally,as an example the preliminary design of the radiation safety system for a laser device at Stanford Linear Accelerator Center(SLAC) was described.The results of this study provide a reference for the radiation safety assessment and safety system design for strong laser devices.
Progress in applications of shockwave induced by short pulsed laser on surface processing

Zhen Zhang,Wenzhe Qiu,Guojun Zhang,Denghua Liu,Peng Wang

DOI: https://doi.org/10.1016/j.optlastec.2022.108760

2022-10-16

Abstract:The force effect of the shockwave generated by the short-pulse and ultra-short-pulse laser enables the laser to enhance the mechanical properties of the material without ablating the material, improve the microstructure, change the shape of the material, and remove the tiny particles attached to the surface of the material, etc. Therefore, it is widely used in surface strengthening, surface cleaning, metal forming, etc. Laser shock peening (LSP) and laser shock cleaning (LSC) are two applications of laser shockwave in surface processing. The force effect of the laser shockwave allows non-thermal treatment has been used in aerospace, biomedical, semiconductor, etc. This paper reviews the principle of laser shockwave effects and the existing processing methods of short laser-included plasma shockwave; the numerical model of laser shock effects, including the laser–material interaction model and surface processing model; the effects of laser parameters on processing performance; the mechanical properties, the microstructure, and the surface features; finally, the future research and development of laser shock effect are prospected.

optics,physics, applied

Progress in research on the interaction mechanism of high-power laser and materials

Researches on Laser Damage Resistance of Optical Films

Interaction between Laser and Liquid Material & Its application in Laser Propulsion

Laser-liquid interaction & its application in laser propulsion

Study on design of high-power fiber fused components

Studies on the Mechanism of Laser Acupuncture-moxibustion

Progress on the Interaction Between Intense Spatially Structured Light Fields and Atoms

Ultrafast dynamics observation during femtosecond laser-material interaction

A Review of an Investigation of the Ultrafast Laser Processing of Brittle and Hard Materials

Thermal and Mechanical Breakage Induced by High Power Laser on Optical and Photoelectric Elements

Advances in Study on Laser Propulsion

Physical and Chemical Processes and Mechanism of Pulsed Laser Ablation of Metal Oxides

Status of Study on the Effect of Laser Radiation to Water Droplet

Hybrid atomistic-macroscale modeling of long-time material behavior in nanosecond laser-material interaction

Light-Material Interactions Using Laser and Flash Sources for Energy Conversion and Storage Applications

Advanced laser-driven ion sources and their applications in materials and nuclear science

Molecular Dynamics Simulation of Thermal and Thermomechanical Phenomena in Picosecond Laser Material Interaction

Superintense laser-driven photon activation analysis

A Review of Research Progress on Machining Carbon Fiber-Reinforced Composites with Lasers

Preliminary Study on Hazard of Hard X-ray Radiation Produced in Interaction Between High Intensity Laser and Solid Target

Progress in applications of shockwave induced by short pulsed laser on surface processing