Abstract:The dynamics of helical gear-shaft systems are characterized by three-dimensional (3D) meshing contacts that have significant variations in the location and size of the contact area, resulting in noise that is unavoidably transmitted to the gearbox through the shaft. Accurate and efficient predictions of the dynamic behaviors of helical gear and shaft are indispensable in reliable and cost-effective gearbox design. Available analytical methods, though computationally feasible, cannot consider multi-point contacts and uneven tooth-load distribution. In contrast, the finite element (FE) method provides a high-fidelity approach to compute the dynamic behaviors of a general gear-shaft system at high expenses of computation. This paper aims to establish a high-efficiency multibody dynamic model for 3D contacts in helical gear-shaft systems, in which the helical gear is pertinently represented under the framework of Arbitrary Lagrangian Eulerian formulation and the shaft is discretized by 3D Timoshenko beam elements. The computational efficiency is greatly improved through the following four steps. First, the low-frequency approximation technique is adopted to reduce the degrees of freedom (DOFs) resulting from the fixed boundary normal modes. Second, under the framework of ALE formulation, only the FE nodes of three meshing tooth-faces are defined as boundary nodes. Then, the dynamic equations and Jacobian matrix are simplified by ignoring the inertial forces associated with deformation. Finally, a two-step algorithm is adopted to accelerate the contact detection process. The accuracy and efficiency of the proposed method are demonstrated through five numerical tests with correlation to commercial nonlinear finite element software. (C) 2019 Elsevier Ltd. All rights reserved.

Automatic generation and densification of 3-D finite element mesh for helical gear tooth

An advanced CAD/CAE integration method for the generative design of face gears

An adaptive geometric meshing theory for the face-milled generated spiral bevel gears

Geometric design and analysis of face-gear drive with involute helical pinion

Parametric modeling and contact analysis of helical gears with modifications

An Efficient Multibody Dynamic Model of Three-Dimensional Meshing Contacts in Helical Gear-Shaft System and Its Solution

Computerized Investigation of Real Tooth Contact Analysis of Face-milled Spiral Bevel Gears

A Generalized Algorithm and Simulation Verification of Non-circular Gear Tooth Surface Data Points

Tooth Contact Analysis of Involute Gear

Tooth surface geometry optimization of spiral bevel and hypoid gears generated by duplex helical method with circular profile blade

The Research on Generating Method of Three Dimensional Digital Tooth Surfaces

Computerized Design and Analysis of Face-Milled, Uniform Tooth Height Spiral Bevel Gear Drives

Generation and Meshing Analysis of a New Type of Double Helical Gear Transmission

A new closed-form calculation of envelope surface for modeling face gears

Investigation on the Dynamic Characteristics of Non-Orthogonal Helical Face Gears with Higher-Order Tooth Surface Modification

Mathematical design and meshing analysis of a new internal gear transmission based on spatial involute-helix curve

Spur Gears Static and Dynamic Meshing Simulation and Tooth Stress Calculation

Meshing Stiffness Analysis of Gear Using the Ishikawa Method

Research on simplification of face gear tooth surface design

Finite Element Analysis of Gears Meshing Based on MW Level Wind Turbine

Mathematic model and tooth contact analysis of a new spiral non-circular bevel gear