Abstract:The stability of the receiving echo in laser tracking was useful for keeping track of targets in their orbits. The reflected signal was affected by the reflection distributing characteristic of the target surface and laser incidence angle. In this paper the bidirectional reflection distributing function (BRDF) was used to analyse the effects of the receiving echo. The bidirectional reflection distribution of target satellite surface was obtained, it contained that the component of diffuse reflection became larger and the component of specular reflection became small as the increase of the target surface roughness. The receiving echo increased as the increase of the component of specular reflection, when the incidence angle was small. The receiving echo power decreased quickly under the bigger incidence angle. When the incidence angle was larger than 34, the minimum receiving echo power that was computed by the BRDF was lower than the one computed by the lidar formula. At this time, the illuminating laser power should become five-times of the former one or the receiving aperture became 2.5 times of the former one, these methods could remove the effect of decreasing of the receiving echo power. The white coating of thermal control diffuse reflection material and F36 of the multi-cladding specular reflection material were used to do the experiment. The experiments results accorded with the simulation results. The white coating has a big surface roughness, the scanning angle was bigger, and the specular reflection component was small. When the incident angle was smaller than 45 degrees, the receiving echo power that was computed by the BRDF was bigger than one computed by the lidar formula. The multi-cladding has a small surface roughness, the specular reflection component was big. There were no reflected signals when the incidence angle was bigger than 2 degrees.

Experimental study on bidirectional reflectance distribution function of laser scattering from various rough surfaces

Experimental Research of Bidirectional Reflectance Distribution Functions of Target Surfaces with Different Roughness

Research on Far-Field Diffraction of Cube-Corner Retroreflector in the Satellite Laser Ranging System

Experimental study on bidirectional reflectance distribution function from micro-rough duralumin surfaces

Analysis on Bidirectional Reflectance Distribution Function of Rough Earth Surface in Remote Sensing Imaging

3-D measurements of bidirectional reflectance distribution functions of target

Experimental study of laser scattering from very rough surfaces

3-D Measurements of Bidirectional Reflectance Distribution Functions of Target Surfaces with Different Coats

Roughness Characterization of Well-Polished Surfaces by Measurements of Light Scattering Distribution

Laser Rader Cross-Section Obtained by the Measurement of Bidirectional Reflectance Distribution Function

Experimental Analysis of the Bidirectional Reflectance Distribution Function(brdf) of Exterior Finishing Surface for Typical Building

Comparison and Research for Several Bi-Directional Reflectance Distribution Function (BRDF) Measurements

Remote measurement of surface roughness, surface reflectance, and body reflectance with LiDAR

Optimization of Ray Tracing Algorithm for Laser Radar Cross Section Calculation Based on Material Bidirectional Reflection Distribution Function

Calculation of laser radar cross-section of a spatial object and its experimental verification

Influence of Surface Material Characteristics on Laser Radar 3d Imaging of Targets

Experimental study on object reflection of imaging laser radar

A study on tracking echo affected by the bidirectional reflection distribution function (BRDF) of a target surface

Measurement and Application of Bidirectional Reflectance Distribution Function

Bidirectional reflectance distribution function based surface modeling of non-Lambertian using intensity data of light detection and ranging.