Abstract:On the basis of previous experimental studies of two-phase flow condensation heat transfer for R134a inside the horizontal micro-fin tubes, a theoretically analysis of heat transfer characteristic combining both heat transfer mechanism and flow mechanism is discussed by the experimental data of heat transfer coefficient and pressure drop, to further clarify the influence of experimental condition and tube structure on heat transfer characteristics under the special working condition. Two performance factors, enhancement factor (EF) and penalty factor (PF), are introduced to quantitatively compare the effect of micro-fin on the heat transfer coefficient and the pressure drop between enhance tube and smooth tube. Meanwhile, the comprehensive factor, CHF, is applied to evaluate the comprehensive performance of heat transfer tube. It was found that enhancement factor (EF) and penalty factor (PF) both increase with increasing mass flux and fin helical angle, and decreasing saturation temperature, the comprehensive factor, CHF, is always greater than one and increases with increasing fin helical angle and mass flux, and decreasing saturation temperature. Moreover, based on the comparative analysis findings that some existing correlations of heat transfer characteristics underestimate most of the experimental data, and the experimental variable has great influences on the correlation prediction accuracy, such as mass flux, which is proportionate to the prediction deviation of correlation. Therefore, a new correlation was developed through analyzing quantitatively influencing mechanism of the experimental variable on the heat transfer characteristics, in a way that a two-phase frictional multiplier is defined firstly from the experimental data and then the forced convection heat transfer mechanism is redefined based on the comprehensive effect of various experimental variables. By the experimental data verification, the new correlation shows good prediction effect with the mean deviation of less than 5%.

Theoretical study on the critical flow through a straight-edged tube

Theoretical and Experimental Analyses of Two-Phase Flow Condensation Heat Transfer Inside the Horizontal Micro-Fin Tube

Two-phase Critical Discharge of Initially Saturated or Subcooled Water Flowing in Sharp-Edged Tubes at High Pressure

Theoretical Calculation Of The Critical Heat Flux In Annular Upward Flow In Vertical Narrow Rectangular Channels

Theoretical study on the characteristics of critical heat flux in vertical narrow rectangular channels

An improved mechanistic critical heat flux model and its application to motion conditions

An Investigation of Flow Characteristics and Critical Heat Flux in Vertical Upward Round Tube

Experimental and theoretical investigation on condensation inside a horizontal tube with noncondensable gas

Nonequilibrium Modeling of Two-Phase Critical Flow

A simplified two-fluid model for more stable microchannel two-phase critical flow prediction

Numerical Simulation on Heterogeneous Heat Transfer in Water at Supercritical Pressures in Inclined Upward Tubes

Numerical Investigation of Heat Transfer to Supercritical Pressure Water in Vertical Tube with Non-Uniform Heating Form

Critical Heat Flux Prediction Model for Low Quality Flow Boiling of Water in Vertical Circular Tube

Experimental and numerical study on the heat transfer to supercritical water in an inclined smooth tube

Experimental Study on Critical Heat Flux of Two-Phase Flow in a Vertical Square Tube

A Novel Model of Turbulent Convective Heat Transfer in Round Tubes at Supercritical Pressures

Numerical Study of Heat Transfer to Supercritical Water in an Inclined Tube

Flow Characteristic of Steam Jet Condensed into a Water Pipe Flow - a Numerical Study

Mixed convective heat transfer in a horizontal curved tube under supercritical pressure

Numerical Analysis of Two-phase Flow Instability in Evaporating Tube under Non-uniform Heating Condition

Numerical Simulation of Laminar Pulsating Flow in Tubes