Abstract:In this work, molecular dynamics simulation and linear elastic fracture mechanics were employed to analyze the crack-tip behavior of a Mode I crack in nanocrystalline titanium. The effects of crystalline orientation, twin boundary and stacking fault on crack propagation were taken into account. Simulation results demonstrate that the crack-tip behavior and thus the crack propagation mode strongly depend on crystalline orientations and plane defects. Cracks lying on the hexagonal close-packed basal plane, the prismatic plane, or along a stacking fault plane defect propagate in a brittle manner, without involving proper dislocation emissions and twin nucleations in the crack-tip vicinity. In contrast, cracks show a ductile propagation behavior when aligned along the pyramidal plane, the {10 (1) over tilde2} plane, or the {10 (1) over bar2} <(1) over bar 011 > twin boundary. For these cases, local crack-tip plasticity and crack-tip reconstructions are found to play significant roles. The impact of strain rate on the crack-tip behavior of a basal crack was also investigated in detail. Five strain rates varied between 10(9) s(-1) and 10(10) s(-1) were considered. With increased strain rates, a brittle-to-ductile transition was clearly observed for crack propagation. The desired transition can be attributed to the high stress and energy concentrations near the crack-tip under elevated strain rates, leading to the successive emission and propagation of partial dislocations. To verify and validate the simulation results, a theoretical analysis on the competition between brittle and ductile crack propagations was also implemented. The theoretical predictions based on the linear elastic fracture mechanics were found to reasonably agree with the simulation results. The observations and conclusions deduced from the combined modeling and theoretical study are helpful to the better understanding of fracture mechanics in nanocrystalline titanium.

Nucleating and Propagating of Nanocrack in Dislocation-Free Zone in Brittle Materials

In-Situ Observation of Initiation and Propagation of Cleavage Microcrack in Tial

Nucleating, Blunting or Propagating of A Nanocrack in Dislocation Free Zones of Thin Crystals

The in-situ TEM observation of nanocrack in titanium aluminide

Effects of Crystalline Orientation, Twin Boundary and Stacking Fault on the Crack-Tip Behavior of a Mode I Crack in Nanocrystalline Titanium

IN-SITU OBSERVATIONS OF MICROCRACK NUCLEATION AND BLUNTNESS IN DUCTILE FRACTURE

In situ observations of microcrack nucleation and bluntness in ductile fracture

In situ observation of intergranular fracture propagation in nanocrystalline freestanding ultrathin tungsten film

Phase-field-crystal Simulation of Nano-Single Crystal Microcrack Propagation under Different Orientation Angles

In Situtem Observations of Nucleation and Bluntness of Nanocracks in Thin Crystals of 310 Stainless Steel

Crack propagation paths and fracture of Ni-based single crystal

The Nucleation of Microcracks under Tensile Stress in Multi-Phase High Nb-containing TiAl Alloys

A Study of Relationship Between Dislocation Configuration of Nanocrack and Brittle-Ductile Mode of Fracture: Atomistic Modeling

Microcrack Initiation Behavior Around Film Cooling Holes in a Ni-based Single Crystal: in Situ Observation and Crystal Plastic Analysis

In-situ TEM Study of Crack Propagation in Crystal Thinning Area and Crystal Rotation at Crack Tip in Al

The In-Situ Observations of Microcrack Nucleation and Bluntness in Ductile Fracture

Crack Mediated Dislocation Activities in Al/Ti Nanolayered Composites: an Atomistic Study

Nucleation and Blunting of Nanocracks in Brass

Nanoscale rotational deformation effect on dislocation emission from an elliptically blunted crack tip in nanocrystalline materials

Insitu Transmission Electron Microscopy Investigation of Crack Propagation in Single Crystal Ni3Al

A Molecular Dynamics Simulation of Fracture in Nanocrystalline Copper