Abstract:Polydimethylsiloxane (PDMS)/polyvinylidene fluoride (PVDF) composite membranes were fabricated and subsequently applied in ethanol recovery from an ethanol-water mixture by pervaporation (PV) using fractional condensation. The effects of feed temperature and feed flow velocity on the pervaporative properties of PDMS/PVDF composite membranes were investigated. Scanning electron microscopy (SEM) results showed that PDMS was coated uniformly on the surface of porous PVDF substrate, and the PDMS separation layer was dense with a thickness of 1.7 µm. Additionally, it was found that with increasing feed temperature, the total flux of the composite membrane increased, whereas the separation factor decreased. As the feed flow velocity increased, the total flux and separation factor increased. Besides, the permeate vapor was condensed by a two-stage fractional condenser maintained at different temperatures. The effects of the condensation conditions on fractions of ethanol-water vapor were studied to concentrate ethanol in product. The fractional condensers proved to be an effective way to enhance the separation efficiency. Under the optimum fractional condensation conditions, the second condenser showed a flux of 1,329 g/m2 h and the separation factor was increased to 17.2. Furthermore, the long-term operation stability was verified, indicating that the PV system incorporating fractional condensation was a promising approach to separate ethanol from the ethanol-water mixture.

Simulation of pervaporation based on a new mass transfer model

Process Design of Continuous-Flow Pervaporation Separation for Alcohol Dehydration

Comprehensive Analysis on Anomalous Phenomenon of Ethanol-Soluble PVB Membrane for Ethanol Recovery Via Pervaporation

Process design and optimization of continuous-flow pervaporation technique for the dehydration of ethanol-water mixture

Pervaporation of methanol/MTBE/C5 ternary mixtures through the CA membrane

Effect of the Permeants/Polymer Interactions on the Pervaporative Separation Properties of the P(Vdf-Co-Hfp) Membrane

A novel high-flux asymmetric p(VDF–HFP) membrane with a dense skin for ethanol pervaporation

Study on the Dehydration of Organic Solvents by Pervaporation and the Mass Transfer Mechanism of Pervaporation

Mass transport study of PVA membranes for the pervaporation separation of water/ethanol mixtures

Performance of a pervaporation system for the separation of an ethanol-water mixture using fractional condensation.

Pervaporation Separation of Ethanol from Aqueous Solution by PDMS Membranes Crosslinked with VTES

Mathematical models and simulation of pervaporation processes in practical membrane modules

Pervaporative Dehydration of Methanol Using PVA/Nanoclay Mixed Matrix Membranes: Experiments and Modeling

Pervaporation of Ethanol/water Mixtures by PDMS/PVDF Composite Membranes with High Permeability

Effect of Pervaporation Module Structure on Separation Performance

Nonequilibrium Dissolution-diffusion Model for PDMS Membrane Pervaporation of ABE Water Binary System

Design and operation of an enhanced pervaporation device with static mixers

Preparation and pervaporation performance of PVA membrane with biomimetic modified silica nanoparticles as coating

Pervaporation of modified composite membrane for dehydration of micro-water isopropanol

Separation of Ethanol from Ethanol/Water Mixtures by Pervaporation with Silicone Rubber Membranes: Effect of Silicone Rubbers

A modified solution-diffusion model and its application in the pervaporation separation of alkane/thiophenes mixtures with PDMS membrane