Utility and influence mechanism of densification modulation on grain boundary diffusion in NdFeB magnets
San'gen Luo,Munan Yang,Shuwei Zhong,Sajjad Ur Rehman,Jiajie Li,Xiaoqiang Yu,Bin Yang
DOI: https://doi.org/10.1016/j.jre.2024.02.011
IF: 4.632
2024-02-22
Journal of Rare Earths
Abstract:Grain boundary diffusion technology is pivotal in the preparation of high-performance NdFeB magnets. This study investigates the factors that affect the efficiency of grain boundary diffusion, starting from the properties of the diffusion matrix. Through the adjustment of the sintering process, we effectively prepared magnets with varied densities that serve as the matrix for grain boundary diffusion with TbH x diffusion. The mobility characteristics of the Nd-rich phase during the densification stage are leveraged to ensure a more extensive distribution of heavy rare earth elements within the magnets. According to the experimental results, the increase in coercivity of low-density magnets after diffusion is significantly greater than that of relatively high-density magnets. The coercivity values measured are 805.32 kA/m for low-density magnets and 470.3 kA/m for high-density magnets. Additionally, grain boundary diffusion notably enhances the density of initial low-density magnets, addressing the issue of low density during the sintering stage. Before the diffusion treatment, the Nd-rich phases primarily concentrate at the triangular grain boundaries, resulting in an increased number of cavity defects in the magnets. These cavity defects contain atoms in a higher energy state, making them more prone to transition. Consequently, the diffusion activation energy at the void defects is lower than the intracrystalline diffusion activation energy, accelerating atom diffusion. The presence of larger cavities also provides more space for atom migration, thereby promoting the diffusion process. After the diffusion treatment, the proportion of bulk Nd-rich phases significantly decreases, and they infiltrate between the grains to fill the cavity defects, forming continuous fine grain boundaries. Based on these observations, the study aims to explore how to utilize this information to develop an efficient technique for grain boundary diffusion. Graphical abstract Magnets with different densities underwent grain boundary diffusion through modified sintering. The results show that low-density magnets experience a significantly larger increase in coercivity (805.32 kA/m) compared to high-density magnets (407.3 kA/m) after diffusion. Microstructural analysis reveals that the Nd-rich phase concentrates at triangular grain boundaries in low-density magnets before diffusion, resulting in more cavity defects. However, after diffusion, the proportion of large Nd-rich phases decreases, filling the cavities and forming continuous grain boundaries, significantly increasing magnet density. Atoms at cavity defects have higher energy and mobility, leading to lower activation energy for diffusion and promoting the process. Download : Download high-res image (453KB) Download : Download full-size image
chemistry, applied