Abstract:In the field of measuring the laser power, the traditional way is direct measuring based on thermal effects. In this method, the laser power can be measured from the temperature change of the sensor absorbing the laser light. However, it is difficult to operate when the power exceeds 10kW level because of the linearly scaling size of absorbing object and the relatively long recovery (cooling) periods, which results in the proposal and fast development of indirect measuring technique route. Using light pressure to measure laser power is one of the recent research hotspots of indirect measuring. The typical system design is a scale attached with a nearly perfect mirror that had shown the advantages such as high accuracy, fast response, real-time measuring and convenient calibration. Nevertheless, the commercial mirror (with a reflectivity of 0.997 as a typical value) and scale (with a 100nN resolution as a typical value) cannot achieve a stable measuring due to the feeble light pressure. In fact, the measuring uncertainty could be 7%-13% in practical operation. So it is reasonable and feasible to amplify the light pressure. In this paper, we propose a new structure design based on oscillation cavity which can improve the energy utilization and increase the number of reflections. The force measured by our system is expected to be 50 times more than that imparted by single reflection if the reflectivity of the mirrors installed on the oscillation cavity is larger than 0.99. This novel method can not only achieve higher sensitivity but also retain the advantages of indirect measuring such as fast response, real-time measuring. The resolution ratio could be at the level of 1W using the same scale as the sensor. The theoretical principles and system design will be introduced and analyzed in detail.

Real-time measurement of the power-density-distribution of a high power infrared laser

Test and Image Processing of Power Density Distributions for a High Power Laser

Power Measure and Control System for High Power Laser in Real-Time

Measurement of thermal effect in high-power laser irradiated liquid crystal device using digital holographic interferometry

A New Design for Indirectly Measuring Laser Power with Improved Performance

Review On Recent Research Progress On Laser Power Measurement Based On Light Pressure

Achieving 1-μg Weighing Resolution of Light Pressure by Drift Analysis and Compensation for Precision Sub-Kilowatt Laser Power Measurement

Study on Near-Field Image Extraction in High Power Lasers

Measurement of Laser Power for Photo-Triggered Drug Delivery in Vivo

Analysis Of Nonlinear Self-Focusing Phenomenon In High-Power Laser System Based On Ray-Tracing

Far-field beam quality of high-power unstable resonators TEA CO2 laser

Microfabricated sensor device for CW and pulsed laser power measurements

Research on a middle infrared and long infrared dual-band laser

Measuring Fluence Distribution Of Intense Short Laser Based On The Radiochromic Effect

Measurements of properties in time, space and frequency of 1010W high power laser

Real-Time Infrared Laser Measurement System Design and Development

Thermal Distortion Measurements and Absorption Analysis by Finite Element Method of High Power DF Laser Reflectors

Detection Methods of Far-field Energy Density of the High Power Pulse Laser

Peak Power Measurement of Nanoscale Short-Pulse Laser

An Improved Measurement Technique for Atmospheric Attenuation of Laser Transmittance

A Real-Time Energy Meter for Medical Excimer Laser