Abstract:This work reports the structural effects on the focusing and imaging efficiency of 20–30 nm‐resolution zone plates at Diamond Light Source and Shanghai Synchrotron Radiation Facility. The zone width and the duty cycle were optimized using a modified beam‐propagation method for peak efficiency, and the effect of residual resist was also explored using simulation and experimental measurements.Hard X‐ray microscopes with 20–30 nm spatial resolution ranges are an advanced tool for the inspection of materials at the nanoscale. However, the limited efficiency of the focusing optics, for example, a Fresnel zone plate (ZP) lens, can significantly reduce the power of a nanoprobe. Despite several reports on ZP lenses that focus hard X‐rays with 20 nm resolution – mainly constructed by zone‐doubling techniques – a systematic investigation into the limiting factors has not been reported. We report the structural effects on the focusing and imaging efficiency of 20–30 nm‐resolution ZPs, employing a modified beam‐propagation method. The zone width and the duty cycle (zone width/ring pitch) were optimized to achieve maximum efficiency, and a comparative analysis of the zone materials was conducted. The optimized zone structures were used in the fabrication of Pt‐hydrogen silsesquioxane (HSQ) ZPs. The highest focusing efficiency of the Pt‐HSQ‐ZP with a resolution of 30 nm was 10% at 7 keV and >5% in the range 6–10 keV, whereas the highest efficiency of the Pt‐HSQ‐ZP with a resolution of 20 nm was realized at 7 keV with an efficiency of 7.6%. Optical characterization conducted at X‐ray beamlines demonstrated significant enhancement of the focusing and imaging efficiency in a broader range of hard X‐rays from 5 keV to 10 keV, demonstrating the potential application in hard X‐ray focusing and imaging.

Fabrication of soft X-ray condenser zone plates

Fabrication of Soft X-Ray Phase Condenser Zone Plates

Design and Fabrication of Condenser Zone Plates for A Soft-X-Ray Microscopy Beamline in Hefei

Studies on Phase Ronchi Gratings and the Fabrication of Soft X-Ray Condenser Zone Plates

Fabrication of Fresnel zone plates with high aspect ratio by soft X-ray lithography

Fabrication of X-ray Imaging Zone Plates by E-Beam and X-ray Lithography

Experimental study on optical field distribution of the soft X-ray linear monochromator

Design and Fabrication of High Aspect-ratio Hard X-ray Zone Plates

X-ray Imaging Fresnel Zone Plates and Fabrication

Fabrication of the High Resolution X-Ray Diffractive Element

Optical Design and Fabrication of the off Axis Paraboloid and Ellipsoidal Mirrors of Beam Line for Synchrotron Radiation Biological Spectroscopic Experiments

Fabrication and application of X-ray zone plates

Preliminary Optical Design of an Imaging Soft X-Ray Microscopy (IXM) Beam Line and Fabrication of Zone Plates in Hefei

Linear Zone Plate Monochromator For Soft-X-Ray Microscopy

Fabrication and Performance of Etched Multilayer X-Ray Optics

Effects of the Condenser Fractal Zone Plate in a Transmission X-ray Microscope

A Compound Kinoform/Fresnel Zone Plate Lens with 15 Nm Resolution and High Efficiency in Soft X-Ray.

A study of structural effects on the focusing and imaging performance of hard X‐rays with 20–30 nm zone plates

Designing of Extended Frsenel Zone Plates for Focusing X-rays

Characterization of Relative Diffraction Performance of Soft X-Ray Zone Plates by Experiment

High-efficiency focusing and imaging by dielectric kinoform zone plate lenses with soft X-rays.