Abstract:The traditional methods taking nodal displacements as primary unknown variables are only applicable to the determination of the static and kinematic determinacy of pin-bar assemblies. For other types of pin-jointed assemblies, such as reciprocal configurations, traditional methods are no longer valid for determining their static and kinematic determinacy. In order to tackle the problem, this paper proposes a new generic method by taking the rigid-body displacements of each element as primary unknown variables. On the basis of the 'dislocations' compatibility at the articulated points in the configurations, the compatibility equations are derived and then kinematic matrix is obtained. Meanwhile, the forces at the articulated points of the elements are also chosen as primary unknown variables, and then the equilibrium equations at the reference point in the elements are derived to give the associated equilibrium matrix. From matrix computations for the obtained kinematic matrix and equilibrium matrix, the static and kinematic determinacy of the configurations can be determined. Furthermore, the geometric nonlinearity of the articulated mechanisms is considered, and then the exact kinematic governing equations and higher-order displacement compatibility conditions are established. Finally, several numerical examples are employed to demonstrate the effectiveness of the proposed new generic method for determining the static and kinematic determinacy. The results from the proposed method are then examined by those from traditional methods and finite element analyses. From the results for numerical examples, the first order infinitesimal mechanisms occur in the planar reciprocal configurations assembled from regular triangles and the Archimedes tiling, while the curved reciprocal configurations with the same topologies have no redundant restraints and are thus geometrically stable.

Triangular and matrix method for determining singular position of mechanisms

Mobility and Equilibrium Stability Analysis of Pin-Jointed Mechanisms with Equilibrium Matrix SVD

Singularity and Kinematic Bifurcation Analysis of Pin-Bar Mechanisms Using Analogous Stiffness Method

A Method for Robot Placement Optimization Based on Two-Dimensional Manifold in Joint Space.

Geometric Methods in the Modeling of Robot Mechanisms

Dynamics Numerical Analysis of Space Deployable Mechanism with Three-Dimensional Clearance Revolute Joint

Determination of Static and Kinematic Determinacy of Pin-Jointed Assemblies Using Rigid-Body Displacements As Primary Unknown Variables

Analysis of Singular Configuration of Robotic Manipulators

Enumeration and optimum design of a class of translational parallel mechanisms with prismatic and parallelogram joints

Dynamics Analysis of Mechanisms with Variable Topologies Using Fully Cartesian Coordinates Method

Singularity Analysis of a New 3-DOF Parallel Mechanism for a Parallel Kinematics Machine

A Novel Methodology to Study the Singularity of Spatial Parallel Mechanisms

Singularity analysis of a kinematically redundant (6+2)-DOF parallel mechanism for general configurations

Identification of Real and Complex Solution Varieties and their Singularities defined by Loop Constraints of Linkages using the Kinematic Tangent Cone

Singularity analysis of a kinematically redundant (6+2)-DOF parallel mechanism for zero-torsion configurations

Force/Motion Transmissibility Analysis of Six Degree of Freedom Parallel Mechanisms

Instantaneous Kinematics and Singularity Analysis of Spatial Multi-DOF Mechanisms Based on the Locations of the Instantaneous Screw Axes

Identification Algorithm to Determine the Trajectory of Robots with Singularities

A New Theoretical Method for Solving Forward Kinematics of the Parallel Mechanisms Based on Transfer Matrix

Numerical methods of closed-loop multibody systems with singular configurations based on the geometrical structure of constraints

A New Planar Two Degrees of Freedom Parallel Mechanism