Abstract:Continuous silicon carbide fiber reinforced silicon carbide composite (SiCf/SiC) is a critical structural material for the development of next-generation aircraft engines. The interfacial property is one of the important factors determining the material mechanical properties. Therefore, this study characterized the interfacial mechanical properties of domestic third-generation 2.5D SiCf/SiC and investigated its relationship with tensile properties. The residual stress of the 2.5D SiCf/SiC constituents and interfacial sliding stress (IFSS) were quantitatively analyzed by hysteresis characteristics during the cyclic tension loading/unloading test. Statistical distributions of the in-situ fiber strength (sigma(fu)) were obtained based on the fracture mirror radius of pull-out fibers. Interfacial shear strength (ISS) and interfacial debonding energy (G(i)) were obtained through the push-in method. Results show that combination of macroscopic and microscopic methods can comprehensively describe the interfacial mechanical performance of 2.5D SiCf/SiC from crack initiation to final debonding. The IFSS, ISS, and G(i) of 2.5D SiCf/SiC are 56 MPa, (28 +/- 5) MPa, and (2.7 +/- 0.6) J/m(2), respectively. Values of ISS and G(i) indicate weak interface bonding, causing it susceptible to cracking under shear stress, while the large IFSS suggests that relative fiber sliding is inhibited after interface debonding, hindering fiber pull-out. The obtained interfacial properties can predict the proportional limit stress (sigma(PLS)) accurately according to the ACK model. Based on the interfacial properties and the in-situ fiber strength (sigma(fu)), the tensile strength of 2.5D SiCf/SiC is predicted to be higher than the experimental value, which is related to the interfacial radial compressive residual stress and residual tensile stress endured by the fiber.

Interfacial properties in SiC(Nicalon)/Al composites

Mechanical Behavior of SiCf/SiC Composites with Alternating PyC/SiC Multilayer Interphases

Evaluation of in-situ fiber/matrix interfacial properties

Interfacial Mechanical Properties of the Domestic 3rd Generation 2.5D SiCf/SiC Composite

Reinforcing Al matrix composites by novel intermetallic/SiC interface and transition structure

Correlation Between Interfacial Structure and Toughness in SiC-Al Bilayers

Evaluation of Interfacial Properties in SiC Composites Using an Improved Cohesive Element Method

Pre-use Interfacial Shear Strength Prediction for Fiber-Reinforced Thermosetting Composites Based on Stress-Impedance Effect of Ferromagnetic Microwires

A novel approach based on stress-impedance effect to assess the interfacial properties in fiber-reinforced composites

Interfacial properties of SiCf/SiC minicomposites with a scheelite coating

Interfacial Bonding of Al-Si/C Composites and Improvement of the Thermal Shock Resistance

Analysis of interfacial shear strength of SiCAl composite by acoustic emission method

TEST AND ANALYSIS OF INTERFACIAL SHEARING STRENGTHS OF DIFFERENT LEVELS FOR FINE WEAVE & PIERCED CARBON/CARBON COMPOSITES

Influence of fiber surface properties of SiCf/SiC composites on the interfacial debonding behavior

Microstructure and Mechanical Properties of Cf/SiC Composites with Dispersed C-SiC Interphase Prepared by Chemical Vapor Infiltration

Enhancement of interfacial bond strength of Al2O3f/Al-15Si composite by solidification process

Strengthening Behavior in SiC Nanowires Reinforced Pure Al Composite

Recent advances in joining of SiC-based materials (monolithic SiC and SiCf/SiC composites): Joining processes, joint strength, and interfacial behavior

Interfacial Strength and Deformation Mechanism of SiC–Al Composite Micro-Pillars

Study of Interfacial Stress Distribution in SiC Fiber Reinforced Titanium Matrix Composites on Transverse Tensile Tests

Interfacial Reactions and Mechanical Properties Studies of C-Coated and C/B4C Duplex-Coated SiC Fiber-Reinforced Ti2AlNb Composites