Abstract:Three-dimensional numerical simulations were performed for laminar flow of wavy fin-and-tube heat exchangers by using body-fitted coordinates (BFC) method with fin efficiency effect accounted. The prediction results of average Nusselt number, friction factor and fin efficiency were compared with the related experimental correlations [R.C. Xin, H.Z. Li, H.J. Kang, W. Li, W.Q. Tao, An experimental investigation on heat transfer and pressure drop characteristics of triangular wavy fin-and-tube heat exchanger surfaces, J. Xi'an Jiaotong Univ. 28 (2) (1994) 77–83] and Schmidt approximation [T.E. Schmidt, Heat transfer calculations for extended surfaces, Refrigerating Engineering (April 1949) 351–357]. For Reynolds numbers based on the tube outside diameter ranging from 500 to 4000, the mean deviation is 3.3% for Nusselt number, 1.9% for friction factor and 3.6% for fin efficiency. The distributions of local Nusselt number and fin efficiency on fin surface were studied at wavy angle equal to 0° (plain plate fin), 10° and 20° respectively. The local Nusselt number decreases along the air flow direction, but fin efficiency increases in general. The wavy angle can greatly affect the distributions of local Nusselt number and fin efficiency, and make the distributions present fluctuation along the flow direction. The result also shows that the fin efficiency at the inlet region of wavy fin is larger than that of plain plate fin at the same region. With the increase of Reynolds number, the effects of wavy angle on the distributions of local Nusselt number and fin efficiency are more and more significant.

Experimental investigation on heat transfer and pressure drop characteristics of triangular wavy fin-and-tube heat exchanger surfaces

Study on heat transfer and friction characteristics in fin-tube heat exchangers used for electrical machines cooling

Experimental Study on Heat Transfer and Pressure Drop Characteristics of Four Types of Plate Fin-and-tube Heat Exchanger Surfaces

Experimental and Numerical Investigation of Thermal -Hydraulic Performance in Wavy Fin-and-flat Tube Heat Exchangers

Numerical study of local heat transfer coefficient and fin efficiency of wavy fin-and-tube heat exchangers☆

Experimental Investigation on Heat Transfer and Flow Friction Characteristics in Three Types of Plate Fin-and-Tube Heat Exchangers

Numerical Study on the Heat Transfer and Pressure Drop Characteristics of Fin-and-tube Surface with Four Round-Convex Strips Around Each Tube

Experimental and Numerical Study and Comparison of Performance for Wavy Fin and a Plain Fin with Radiantly Arranged Winglets Around Each Tube in Fin-and-tube Heat Exchangers

Experimental and numerical investigation on air-side performance of fin-and-tube heat exchangers with various fin patterns

EXPERIMENTAL INVESTIGATION OF HEAT TRANSFER AND PRESSURE DROP FOR FIN-AND-TUBE HEAT EXCHANGERS WITH LARGE-ROW AND LARGE-DIAMETER TUBES

Experimental Study on the Pressure Drop and Heat Transfer Characteristics of Tubes with Internal Wave-Like Longitudinal Fins

Experimental Study on the Pressure Drop and Heat Transfer of Two Different Tubes With Plain-Rectangle Internal Fins

Experimental Study and Numerical Simulation on Convective Heat Transfer and Pressure Drop of Internally Longitudinal Finned Tube

Experimental Investigation of Heat Transfer and Pressure Drop Characteristics of H-type Finned Tube Banks

A Comparative Study Of Fin-And-Tube Heat Exchangers With Various Fin Patterns

Experimental and numerical study and comparison of performance for herringbone wavy fin and enhanced fin with convex-strips in fin-and-tube heat exchanger

Numerical study on performance and fin efficiency of wavy fin-and-tube heat exchangers

Computational analysis of heat transfer and pressure drop performance for internally finned tubes with three different longitudinal wavy fins

Numerical Simulation of Heat Transfer in Finned Tube of Heat Recovery Unit Using Fluid-Solid Coupled Method

Experimental Study on Heat Transfer and Pressure Drop Characteristics in a Microchannel Heat Exchanger Assembly with S-shaped Fins

Air Side Performance of a Novel Lanced Fin and Flat Tube Heat Exchanger