Abstract:Hydrodynamics in a 76mm i.d., 10.2m high circulating fluidized bed (CFB) riser and a 76mm i.d., 5.8m high CFB downer were studied for superficial gas velocities ranging from 2 to 5m/s and solid circulation rates up to 100kg/(m2s). Solid holdup, particle velocity and solid flux profiles in the radial and axial positions were presented. Under these operating conditions, axial solid holdup profiles in the riser and the downer could be approximated by an exponential decay function. The radial gradients of the solid holdup profiles in the riser were much higher than those in the downer, showing that the downer had much more uniform solid distribution. The average solid holdup for the entire riser was about 1.5 times higher than the predicted value from Gs/(ρpUg). However, for the downer reactor this ratio dropped to 0.45–0.98 which increased with increasing superficial gas velocity and decreasing solid circulation rate. Solid flow developed much slower in the riser than in the downer. Negative particle velocity was observed in the near-wall region for nearly the entire height of the riser. The average particle velocity for the entire riser was 0.8–0.96 times higher than the superficial gas velocity, and increased with increasing superficial gas velocity and decreasing solid circulation rate. However, in the downer the average particle velocity was 1.13–2.13 times higher than the superficial gas velocity, and increased with both superficial gas velocity and solid circulation rate. High local solid fluxes were observed in the near wall region of the CFB riser and downer reactor. Over-estimation of the calculated cross-sectional average solid flux over the solid circulation rate in the CFB riser was attributed to the fluctuations of the solid holdup and particle velocity.

Hydrodynamics of three-phase fluidized bed in riser

Novel Phase Inversion Model for Gas–solid Turbulent Fluidized Beds

Multi-scale Characteristics and Gas-Solid Interaction among Multiple Beds in a Dual Circulating Fluidized Bed Reactor System

Particle Fluidization Characteristics and Transition in a Hot Gas-Solid Fluidized Bed with Liquid Injection

A Hydrodynamic Model for Circulating Fluidized Beds with Low Riser and Tall Riser

Eulerian-Lagrangian Simulation of Distinct Clustering Phenomena and Rtds in Riser and Downer

Numerical Simulation of Fluid Dynamics of a Riser: Influence of Particle Rotation

Hydrodynamic Behavior of an Internally Circulating Fluidized Bed with Tubular Gas Distributors

Hydrodynamics of a Gas-Liquid-solid Three Phase Circulating Fluidized Bed

Dispersion characteristics of liquid in gas-liquid-solid three phase risers

Hydrodynamics and Lateral Gas Dispersion in A High-Density Circulating Fluidized Bed Reactor with Bluff Internals

Visualization Study On The Interface Of Core-Annulus Flow In A Circulating Fluidized Bed Riser By Piv

Flow Characteristics in a Pilot-Scale Circulating Fluidized Bed with High Solids Flux Up to 1800 Kg/m2 S

Inlet and outlet effects on flow patterns in gas-solid risers

Hydrodynamic and Mass Transfer of Gas-Liquid-Solid Three-Phase Internal Loop Airlift Reactors with Nanometer Solid Particles

Hydrodynamic characteristics of a rectangular gas-driven inverse liquid-solid fluidized bed

Large-eddy Simulation of the Flow Behaviors of Gas and Particles in a Riser

Discrete element simulation of gas-solids flow behavior in riser

A comparative study on hydrodynamics of circulating fluidized bed riser and downer

Numerical Simulation of Flow Behavior of Particles and Clusters in Riser Using Two Granular Temperatures

Numerical Simulation on Two-phase Flow Characteristics in the Supercritical Water Circulating Fluidized Bed Riser