Abstract:It is of significance but still a great challenge to model drag force exerted on particles in dense systems directly from experimental measurements. In this work, a new procedure using inline experimental measurements is developed to establish a total drag model. Specifically, local flow characteristics including slip velocity, particle holdup and particle acceleration are measured simultaneously using an inline vision probe. Then, the total drag coefficient exerted on particles in suspension is calculated using the inline data with the unsteady motion of particles taken into account. At last, the total drag coefficient versus five dimensionless numbers including all important factors are correlated as C D = 3.55 × 10 - 2 ρ r - 1.82 A r 0.53 Re l 0.45 Re - 1.79 α P - 0.49 . Systematically evaluated using the image-based results in this work and PEPT data in the reference as well as Tang model, Gidaspow model and Brucato model popularly used in suspensions, the newly developed model shows some excellent characteristics. (i) It can predict flow field and solid holdup distributions with sufficient accuracy in a wider range of holdups from dilute to dense systems. (ii) Especially, the prediction precision is significantly higher (with deviation of 5.6%) in the holdup distribution compared to Gidaspow model, Brucato model and Tang model. (iii) Furthermore, better mass conservation is always kept during the simulation process compared to the other three models. It is preliminarily inferred that some particles are not fully suspended due to the smaller drag force in the case of Gidaspow model. More studies are still needed to explain quantitatively the above evaluation results.

Gravity Settling of Dispersed Phase Drop Swarms in Extraction Columns in Absence of Mass-Transfer

Exploring the Essence of Three-Phase Packed Distillation: Substantial Mass Transfer Computation

Study on the Numerical Model of Gas-Liquid Dispersion Driven by a Coaxial Mixer

An Improved Dynamic Combined Model for Evaluating the Mass Transfer Performances in Extraction Columns

Two-Way Coupling Model for Fractal-Like Agglomerate-Laden Multiphase Flow

Experimental and numerical study of liquid–liquid interphase mass transfer in a pilot-scale extraction column

A Dynamic Forward Mixing Model for Evaluating the Mass Transfer Performances of an Extraction Column

Mass Transfer Study and Combined Model for a Karr Column

CFD Simulation of Liquid–Liquid Two-Phase Hydrodynamics and Axial Dispersion Analysis for a Non-Pulsed Disc and Doughnut Solvent Extraction Column

Comparison of Methods of Prediction of Flooding Velocities for Packed Liquid Extraction Columns

Mass transfer model for liquid liquid micromixing systems

Effect of Particles on Hydrodynamics and Mass Transfer in a Slurry Bubble Column: Correlation of Experimental Data

Gravity effects on oil–water two-phase displacement in homogeneous porous media

Modeling total drag force exerted on particles in dense swarm from experimental measurements using an inline image-based method

A Simplified Correlation of Mass Transfer in a Pulsed Sieve Plate Extraction Column

A Dynamic Interaction Mass Transfer Model for Simulating the Mass Transfer Process in Extraction Columns

Hydrodynamics and Mass Transfer in A Countercurrent Multistage Microextraction System

CFD Simulation of Flow and Mass Transfer in Structured Packing Distillation Columns

Drag Force of Bubble Swarms and Numerical Simulations of a Bubble Column with a CFD-PBM Coupled Model

A New Equation for Estimating the Height of the Mass Transfer Unit in Extraction Columns

Experimental and CFD simulation study on interphase interaction of the fluidization behavior for spherical and irregular coarse particles