Abstract:Cathode buffer layer (CBL) is one of the key issues influencing the performance of organic solar cells. In this article, a nanocomposite of zinc oxide nanoparticles (ZnO) together with a conjugated polymer, poly[(9,9-bis(3'-(N,N-dimethylamino)propyl)-2,7-fluorene)-alt-2,7-(9,9-dioctyl)-fluorene] (PFN) was developed, and used as the CBL for solution processed inverted organic solar cells (OSC). In comparison with the bare ZnO, PFN or ZnO/PFN stacked layer, the ZnO:PFN nanocomposite CBL employing device showed superior device performance, in particular significantly improved fill factor. Optimized power conversion efficiency (PCE) of P3HT:PC61BM and PTB7:PC61BM device using ZnO:PFN composite CBLs reached to 3.56% and 7.17%, respectively. Influences of the mixing ratio and the layer thickness of the ZnO:PFN nanocomposite CBL on solar cell performance were carefully studied, and results indicated that ZnO:PFN CBL showed a wide tolerance of blend ratio and layer thickness. In particular, no obvious thickness dependent-device performance was found, even when the CBL layer thickness was higher than 125nm, providing a good printing processibility of the nanocomposite. Photoelectron spectroscopy, photoluminescence, as well as electric conductivity of the ZnO:PFN films were studied, and the results were compared with that of the other three reference CBLs. Results demonstrated that the interaction between ZnO and PFN decreases the work function of the blended film, leading to a more favorable energy level alignment for electron injection at the interface. Analysis on the dark J–V curves of the solar cells revealed that device using ZnO:PFN CBL had the best diode characteristics including lowest reverse saturated current density (J0), ideal factor (n), and series resistance (Rs), and highest shunt resistance (Rsh). Such an improvement was ascribed to the defect passivation by the conjugated polymer, which led to an improved charge carrier selectivity of the CBL and consequently enhanced the FF of the solar cells. In addition, long-term stability of organic solar cells was also improved by using ZnO:PFN nanocomposite as the CBL. The current work provides a valuable guideline for the development of high performance cathode buffer layer material for printable organic solar cells.

Sodium Bromide Electron-Extraction Layers for Polymer Bulk-Heterojunction Solar Cells

5-Nm LiF As an Efficient Cathode Buffer Layer in Polymer Solar Cells Through Simply Introducing a C60 Interlayer

[6,6]-Phenyl-C61-butyric acid dimethylamino ester as a cathode buffer layer for high-performance polymer solar cells

Zinc Oxide: Conjugated Polymer Nanocomposite As Cathode Buffer Layer for Solution Processed Inverted Organic Solar Cells

19.35% Efficient Binary Bulk‐Heterojunction Organic Photovoltaic Enabled by Optimizing Bromine‐Substituted Self‐Assembled Carbazole Based Molecules

High-Efficiency, Low-Hysteresis Planar Perovskite Solar Cells by Inserting the NaBr Interlayer

Light Harvesting and Carrier Transfer Enhancement of All-Inorganic CsPbBr3 Perovskite Solar Cells by Al-doped ZnO Nanorod Arrays

Efficiency Enhancement of Polymer Solar Cells by Applying an Alcohol-Soluble Fullerene Aminoethanol Derivative As A Cathode Buffer Layer

4-Bromoaniline Passivation for Efficient and Stable All-Inorganic CsPbI2Br Planar Perovskite Solar Cells

Efficient Polymer Solar Cells by Lithium Sulfonated Polystyrene As a Charge Transport Interfacial Layer

4-Bromoaniline Passivation for Efficient and Stable All-Inorganic CsPbI 2 Br Planar Perovskite Solar Cells

Novel in Situ Self-Doping Cathode Interlayer Materials with Thickness-Insensitivity for High-Efficiency Organic Solar Cells

Mixed-Bromide Halide Exchange toward Efficient and Stable Carbon-Electrode CsPbBr 3 Solar Cells

L‐Arginine‐Doped PFN‐Br as a Cathode Interlayer for Conventional Organic Solar Cells

Solution-processed Bathocuproine Cathode Buffer Layer Towards Efficient Planar Heterojunction Perovskite Solar Cells

Alcohol Soluble Porphyrin for the Cathode Buffer Layers of Fullerene/perovskite Planar Heterojunction Solar Cells

Hierarchically Manipulated Charge Recombination for Mitigating Energy Loss in CsPbI 2 Br Solar Cells

Dimethylamine Exchanging of a New Hole Transport Material for Highly Efficient CsPbI2Br Solar Cells

Significantly Boosting Efficiency of Polymer Solar Cells by Employing a Nontoxic Halogen-Free Additive

Over 1 Μm Electron-Hole Diffusion Lengths in CsPbI2Br for High Efficient Solar Cells

A facile, time-saving fabrication method of high purity CsPbBr3 films for efficient solar cells