Abstract:The complex behaviours of supersonic turbulent boundary-layer flows interacting with combustion is explored through the use of direct numerical simulations. The chosen flow model is a non-premixed hydrogen–air flame ignited within a three-dimensional supersonic turbulent flat-plate boundary layer operating at a Mach number of 2.33 and a friction Reynolds number of approximately 1000. The simulation involves a finite-rate model for the hydrogen–air reaction including 9 species and 19 steps with adiabatic non-catalytic wall conditions. The inlet flow consists of preheated air in the main stream and a hydrogen film injected in proximity to the cold wall, inducing mixing and ignition in the outer layer. The specific inlet configuration leads to two successive transition stages of distinct mechanisms, with the first stage related to the mixing-layer instability and the second one to the boundary-layer instability. The excess Reynolds stresses resulting from the transition exhibit a downstream decrease, with values being lower than canonical adiabatic profiles, particularly in the outer layer. This difference is attributed to the reduced local friction Reynolds numbers, associated with the non-classical wall-normal distributions of density and viscosity. The effect of combustion on the recovery process and skin friction is analysed in comparison with a supplemented chemistry-frozen setting. Velocity–temperature and velocity–species correlations are further examined. The wall-normal profiles of turbulent Prandtl number tend to classical non-reacting values and the turbulent Schmidt number is only slightly affected by the reaction. The strong Reynolds analogy linking velocity and temperature fluctuations is found to be invalid in the outer layer due to the presence of large-scale temperature fluctuations and the inhomogeneity of hydrogen gas distribution, as revealed by a spectrum analysis. A statistical analysis of elementary reactions at varying wall-normal distances is provided, highlighting the dominance of hydrogen atom depletion in the inner region and the prevalence of water vapour production in the outer region, together contributing to the chemical heat release across the boundary layer. Turbulence–chemistry interaction is assessed through a comparison of mean turbulent and laminar chemical heat release rates, showing significant differences of up to an order of magnitude. Using a simple diagnostic tool, the modelling of fluctuations associated with hydrogen gas and two intermediate products is found to be crucial for turbulent chemistry closure.

Numerical study on supersonic mixing and combustion with hydrogen injection upstream of a cavity flameholder

Numerical Investigation of the Combustion and Thermoacoustic Characteristics in an Annular Combustor with Hydrogen

Numerical Studies on Cavity Flame Holders for Supersonic Combustors

Numerical Study on H2 Supersonic Combustion in Scramjet Combustor with Cavity

Study of sonic injection from circular injector into a supersonic cross-flow using large eddy simulation

Modeling of Supercritical-Pressure Turbulent Combustion of Hydrocarbon Fuels Using A Modified Flamelet-Progress-Variable Approach

Numerical Investigation on Combustion Flow of a Kerosene-Fueled Scramjet with 3D Cavity(ⅱ) Preliminary Investigation on Fuel/air Mixing and Flame Stabilization Enhanced by 3D Cavity

Numerical study on the mixing and combustion characteristics of a liquid kerosene jet in a scramjet combustor

Large-Eddy Simulations of Transverse Jet Mixing and Flame Stability in Supersonic Crossflow

Numerical Investigation on Mixing of Atomized Kerosene in Supersonic Flow with H_2 Pilot Flame

Direct numerical simulation of a supersonic turbulent boundary layer with hydrogen combustion

Study on combustion characteristics of swirl premixed combustor

Investigation on the impact of the induced shock wave on the hydrogen mixing augmentation in a supersonic crossflow: A numerical study

Effects of inflow velocity on transverse jet injection in a supersonic cavity combustor

Numerical Investigation on Combustion-Enhancement Strategy in Shock–Fuel Jet Interaction

IDDES simulation of hydrogen-fueled supersonic combustion based on dynamic zone flamelet model

NUMERICAL STUDIES ON THE MIXING OF CH 4 AND KEROSENE INJECTED INTO A SUPERSONIC FLOW WITH H 2 PILOT INJECTION

Effects of combustion on the near-wall turbulence and performance for supersonic hydrogen film cooling using large eddy simulation

Numerical study on supersonic boundary-layer transition and wall skin friction reduction induced by fuel wall-jet combustion

Study of Combustion Flow Field in a Scramjet Engine under Inflow Oscillation Variations Based on Openfoam

Powder fuel transport process and mixing characteristics in cavity-based supersonic combustor with different injection schemes