Abstract:The pavement quality indicator (PQI) is a non-destructive piece of equipment for detecting the compaction degree of asphalt pavement, which can avoid primary damage to the pavement compared with the traditional core-drilling method. In this paper, the PQI method was applied to evaluate the compaction quality of asphalt pavement through data collection, calibration and statistical analysis, and the probability-distribution characteristics of compaction degree were also explored, by fitting the data with probability-distribution models. Furthermore, the optimal detection-spacing was determined by comparing the statistical results of compaction degree measured at different detection-spacings. Test results showed that the calibrated PQI data was close to the actual data of the core sample, and their error rate was within 1%. The compaction degree of the test road was mostly located between 92% and 99%, and the variable coefficient was entirely below 2%, demonstrating that the pavement-compaction quality was satisfactory and uniform. The normal distribution model, lognormal distribution model and extreme-value distribution model had relatively high accuracy in fitting the compaction-degree frequency data, while the sine-wave distribution model was low in fitting accuracy. By comparing the predicted value with the actual value of compaction degree, the normal distribution model was determined as the most appropriate model for describing the frequency distribution of compaction degree. In addition, the detection spacing was selected as 50 m, considering the reliability, accuracy and efficiency. The research results provide technical support for the compaction quality-control of asphalt pavement in a non-destructive, timely, accurate and multi-point manner, ultimately contributing to the excellent service performance and service life of asphalt pavement.

Research on the influence of temperature and humidity to asphalt pavement seedless detection technology

Application of asphalt rapid detection technology in National Highway G360 project

Experimental Study on Pavement Performances of SBP Modified Asphalt

Study On Dynamic Response Characteristics Of Saturated Asphalt Pavement Under Multi-Field Coupling

Application of statistical methods in evaluating asphalt mixture homogeneity

Effects of Asphalt-Aggregate Ratios and Compaction Efforts on Horizontal Aggregate Homogeneity in Asphalt Mixtures

Investigation of Viscoelastic Properties of Polymer-Modified Asphalt at Low Temperature Based on Gray Relational Analysis

Towards an Index of Asphalt Mixture Homogeneity

Study on infrared differential thermal non-destructive testing technology of the permeability of hot mix asphalt pavements

Relationships Between Physical, Mechanical and Acoustic Properties of Asphalt Mixtures Using Ultrasonic Testing

Research on Distribution Model and Detection Spacing of Compaction Degree of Asphalt Pavement Based on the PQI Method

Research on the Road Performance of Asphalt Mixtures Based on Infrared Thermography

Sensitivity and Reliability Analysis of Ultrasonic Pulse Parameters in Evaluating the Laboratory Properties of Asphalt Mixtures

Hypoplastic model for road base coarse-grained materials accounting for temperature effect

Experimental and Numerical Study of Asphalt Material Geospatial Heterogeneity with Intelligent Compaction Technology on Roads

Research on Preparation and High Temperature Behavior of High-Modulus Asphalt

Evaluation of Compaction Characteristics of Asphalt Mixture under Different Compaction Effects

Low Compaction Level Detection of Newly Constructed Asphalt Pavement Based on Regional Index

Investigation of Dynamic Viscoelastic Characteristics of Permeable Asphalt

In-Time Density Monitoring of In-Place Asphalt Layer Construction via Intelligent Compaction Technology

Research on Paving Temperature Segregation and Rolling Uniformity Evaluation Method of Asphalt Pavement