Abstract:Bamboo-concrete composite (BCC) beams are newly-innovated products used for floor system which synergistically utilizes bamboo and concrete components. These composite beams at cur-rent technology belong to the beam characterized with partial composite action due to the ex-istence of relative slip between bamboo segment and concrete slab. Existing investigations have demonstrated that the load bearing capacity of BCC beams depends on their bending stiffness; however, very limited prediction models are available to accurately estimate the bending stiffness of BCC beams. At present, the bending stiffness of BCC beams is predicted with the help of gamma-method in Eurocode 5-Part 1-1, and available studies have demonstrated that this method overestimates the bending stiffness of BCC beams. To this end, this paper presents a novel explicit model characterized with mechanism and data mining to predict the bending stiffness of BCC beams under short-term loads. Three steps were performed to achieve the aforementioned research objective. The first step was to introduce the axial force transfer coefficient into the equilibrium equations of internal force for bamboo segment and concrete slab. Secondly, the bending stiffness of BCC beams was established by taking into account the effect of relative slip with the help of existing experimental results from the interfacial shear test and flexural test. Finally, the proposed model was validated by comparing with flexural performance results of BCC beams collected from available literature as well as those obtained from gamma-method. The comparative results show that: i) the predicted bending stiffness of BCC beams is much closer to tested ones compared with gamma-method; ii) the errors of proposed model predicting the bending stiffness for most BCC beams are within 10% of test results; however, nearly half of the predicted ones using gamma-method have errors exceeding 10% of test results, both of which verify that the mechanism and data mining-dual driven model receives a better prediction for short-term bending stiffness of BCC beams.

Experimental Analysis of Bending Resistance of Bamboo Composite I-Shaped Beam

Test on Bending Resistance Properties of Bamboo-based Composite Ⅰ-shaped Beam

Experimental and Analytical Investigations on Short-Term Behavior of Glubam-Concrete Composite Beams

Bending Stiffness of Bamboo-Concrete Composite (BCC) Beams under Short-Term Loads

Bending Performance of Glubam Beams Made with Different Processes

Flexural behavior of FRP reinforced glubam beams

INVESTIGATION ON BENDING BEHAVIOR OF GLUBAM I-SHAPED JOIST

The Flexural Behavior of Cross Laminated Bamboo and Timber (CLBT) and Cross Laminated Timber (CLT) Beams

Experimental Research on Dowelled Connection of GluBam-Concrete Composite Beams

Research and construction of modern bamboo pedestrian bridges

Structural Behavior of Fully Prefabricated Glubam-Concrete Composite Beams Constructed of Innovative Connectors

Mechanical behavior of connections for glubam-concrete composite beams

Experimental investigation on shear behavior of full-scale glued laminated bamboo beams under three-point loading test and using digital image correlation technique

Experimental investigation on bending behavior of box section bamboo-steel composite beams

Experimental and Nonlinear Analytical Investigation of the Flexural Performance of Single-Box Double-Chamber Steel–bamboo Composite Beams

The Bending Properties of Bamboo Strand Board I-beams

Flexural Behavior of Hybrid Composite Beams with a Bamboo Layer and Lattice Ribs

Experimental and Analytical Investigation of the Flexural Behavior of Steel-Bamboo Composite I-beams with Composite Connections

Combinatorial design and flexural behavior of laminated bamboo–timber composite beams

Experimental study on flexural performance of bamboo beams

Experimental and Analytical Investigation of the Shear Behavior of Steel-Bamboo Composite I-beams with Composite Connections