Abstract:Considering the nonlinearity and uncertainty of a high-speed flexible parallel mechanism,a robust model predictive control strategy was presented to suppress the vibration response of the system.Piezoceramic patch actuator and strain gauge sensors were used.The finite element method and modal truncation technique were applied to obtain the dynamic model of the mechanism.The nonlinear,coupling factors and high-order modal effects existing in the dynamic model of the system were considered as disturbances.The modal force was treated as an uncertain disturbance and the measurement noise was considered.The predictive model of the system dynamic response was introduced and the output was forecasted by the model.A Kalman filter estimator was designed to estimate the state variables of the system.A standard quadratic programming optimization problem was formed where the performance index function minimizes a quadratic performance function.The constraints were the control input voltage and its change rate.The optimization problem was solved to obtain the optimal control output voltages and a rolling optimization control system was then constructed to suppress the vibration response of the system.The optimum placements of the actuators and sensors were determined by using the controllability index featured as actuating energy and the observability index featured as signal energy.Taking a novel 2-DoF parallel mechanism as an example,the experimental modal method was applied to obtain the first two natural frequencies and damping ratios.Comparing with the results obtained by the finite element method,it shows that the theoretical model is not accurate enough.Using dSPACE real-time simulation system and MATLAB/Simulink,the control system was built and the vibration control experimental study was carried out.The experimental results show the proposed controller can effectively suppress the vibration response,and the effectiveness and robustness of the controller was verified.

Vibration Control of the Flexible Robotic Arm Through Modal Interaction

Random Vibration Control for Multi-Degree-of-freedom Mechanical Systems with Soft Actuators

Walking Vibration Suppression for Humanoid Robot Based on Optimal Control

Active Control on Coupled Bending-Torsion Vibration of Two-Link Space Flexible Component

Active Torsional Vibration Control of Flexible Manipulator

Active vibration control of a flexible beam based on experimental modal analysis

Robust Control and Vibration Reduction of a 3D Nonlinear Flexible Robotic Arm

Decoupled Dynamic Model and Control of Flexible Space Manipulator

Distributed Structural Dynamics Control of Flexible Manipulators—ii. Distributed Sensor and Active Electromechanical Actuator

Active Vibration Control of a High-Speed Flexible Robot Using Variable Structure Control

Modeling and control of a two-link flexible space manipulator using the wave-based method

Vibration Control for Active Magnetic Bearing High-Speed Flywheel Rotor System with Modal Separation and Velocity Estimation Strategy

Multiobjective Vibration Control for the Noncollocated Active Magnetic Bearings Flexible Rotor Systems

Integrated Fixed Time Sliding Mode Control for Motion and Vibration of Space Robot with Fully Flexible Base–Link–Joint

Active Vibration Suppression of a 3-DOF Flexible Parallel Manipulator Using Efficient Modal Control

Active control of bending-torsion-coupled vibration of a space flexible manipulator

Vibration control of a high-speed flexible parallel mechanism based on model predictive control

Vibration Control Using Modern Control System for Hybrid Composite Flexible Robot Manipulator Arm

Vibration Suppression of a Large Flexible Spacecraft for On-Orbit Operation

Vibration Suppression Control of Free-Floating Space Robots with Flexible Appendages for Autonomous Target Capturing

Vibration Prediction of the Robotic Arm Based on Elastic Joint Dynamics Modeling