Vibration Characteristics Analysis and Optimization of Corn Combine Harvester Frame Using Modal Analysis Method
Yao Yanchun,Du Yuefeng,Zhu Zhongxiang,Mao Enrong,Song Zhenghe
DOI: https://doi.org/10.11975/j.issn.1002-6819.2015.19.007
2015-01-01
Abstract:The low level of Chinese corn harvest seriously has restricted the corn harvest mechanization. Modal analysis is a very important and useful method for various engineering applications, such as design and dynamic test. There are few researches on vibration test and modal analysis of corn combine harvester frame, which is a key part of the corn harvester. During the harvester’s operation, the frame carries and supports the assembly and components, such as engine, cutting header, cab, picking mechanism, elevator, granary, tank, and all alternating loads will eventually pass to the frame. When the vibration frequency is caused by the external excitation and closed to the natural frequency of the frame, it will produce resonance phenomenon, which accelerates the frame strength failure, and therefore affects the dynamic performance and reliability of the frame structure. Using the method of combining the vibration test and modal analysis, this paper studies the vibration characteristics and optimizes the frame, which has the guiding significance for the corn combine harvester design and optimization. Firstly, the paper studies the finite element modeling and analysis method of the frame, and obtains the natural frequency and vibration mode based on the theory of modal analysis. Secondly, using the method of time domain and power spectrum analysis, the paper analyzes the field road test data, and gets amplitude characteristics and power spectrum at 4 measuring points of the frame, as well as attains the excitation frequency of road roughness which is concentrated in the range from 0 to 2.4 Hz, and the whole machine key components’ excitation frequency, and studies the influence of the frame. Eventually, this paper studies the influence of discontinuous change of the interval of frame wall thickness and stiffness on the frequency and mode, improves the first-order frequency based on the fundamental frequency optimization method, and then puts forward the improvement scheme and optimized frame structure. The result shows that the vibration frequency of the rear bridge above the frame is 9.79 Hz, close to first-order resonance frequency, which has caused resonance and strength failure. At the same time, the vibration amplitude of the frame from high to low is as follows: the rear bridge above the frame, the engine beam position, the engine longitudinal beam position, and the front bridge above the frame. The vibration amplitude of the rear bridge above the frame exceeds the engine amplitude, which illustrates the resonance has occurred. After the optimization, the first-order natural frequency of frame keeps away from the external excitation, which increases from 15.9927 to 22.4595 Hz, and at the same time, after the optimization of vibration shape, the first-order torsional eigen mode magnitude decreases from 7.778 to 3.768; the first-order bending eigen mode magnitude decreases from 6.83 to 3.651, which has improved the mode shape. The durability test shows that the failure rate of optimized frame is reduced, and the mean time without failure increases from 20 to 60 h. This paper presents the modeling analysis, vibration test, data processing and structure optimization method, and provides a good reference for corn combine harvester vibration control and performance optimization.