Abstract:PurposeThe purpose of this paper is to present a novel five‐electrode electrochemical corrosion sensor. Health degradation by the corrosion of steel in civil engineering is a persistent problem. Structural health monitoring (SHM) techniques, including embedded sensors, can greatly improve the quantification of the steel corrosion information, which can lead to promote assessments of structural safety and serviceability. To integrate the corrosion monitoring system in future, the corrosion sensor and the monitoring methods have been explored here in advance. Also, the corrosion monitoring system has been applied preliminarily in the investigation of reinforcing concrete (RC) beams.Design/methodology/approachFirst, a novel five‐electrode electrochemical corrosion sensor has been developed as the hardware to provide the platform for corrosion monitoring methods. Second, half‐cell potential of the RC beams has been measured before and after corrosion. Third, galvanostatic step method has been used to excite the steel‐concrete system, and the transient response of the system has been obtained and analyzed. Finally, wavelet transform algorithm has been established to analyze the electrochemical noise (EN) data of the steel bars in RC beams.FindingsThe results show that the corrosion sensor can be used effectively as the hardware to support the electrochemical measuring techniques. Much valuable information which is extracted by analyzing the potential response to the galvanostatic pulse excitation can be applied to determine the general corrosion state of the reinforcing steel. For pitting corrosion, the energy distribution plot of EN can be adopted as a benchmark method to identify the presence of the corrosion pit.Originality/valueThe paper provides the key techniques for a SHM system to realize corrosion monitoring of large‐scale RC structures in the future.

Finite Element Analysis of Multipoint Counter Electrode Sensor in Steel Corrosion Rate Measurement

A New Corrosion Sensor To Determine The Start And Development Of Embedded Rebar Corrosion Process At Coastal Concrete

Developing a Novel Expression for Chloride Ion Concentration Threshold in Reinforced Concrete: Integration of Electrochemical Analysis and Time-Dependent Modeling

Numerical Simulation of a Magnetic Corrosion Detector for Corrosion Detection of Steel Rebar in Concrete

THE CORROSION MONITORING USING RESISTANCE-PROBE METHOD IN THE CEMENT MOTAR AND COMPARING WITH ELECTROCHEMISTRY-PROBE METHOD

Evaluation of corrosion morphology on mechanical properties of reinforcing steel bars using numerical simulation and simplified analytical model

Corrosion of Steel Embedded in Mortar and Concrete under Different Electrolytic Accelerated Corrosion Methods

An Electromechanical Impedance-Based Sensor for Monitoring the Pitting Corrosion of Steel: Simulation with Experimental Validation

Corrosion Monitoring of Reinforcing Steel in Concrete by Electrochemical Sensors

Three-phase Modelling of Electrochemical Chloride Removal from Corroded Steel-Reinforced Concrete

The Electrochemical Characterization of Rebar Passivation Film in Simulated Concrete Media

Non-uniform Corrosion of Steel in Mortar Induced by Impressed Current Method: an Experimental and Numerical Investigation

Finite-Element Analysis of an Electromechanical Impedance–Based Corrosion Sensor with Experimental Verification

Optimization Design of A Corrosion Monitoring Sensor by Fem for Rc Structures

Numerical Simulation of Steel Corrosion in Chloride Contaminated Concrete

Corrosion Monitoring of Reinforced Steel Embedded in Cement Mortar under Wet-And-Dry Cycles by Electrochemical Impedance Spectroscopy

Identification of the Reinforcing Steel's Corrosion State in RC Beams Based on Electrochemical Sensor

EXPERIMENT ON MONITORING SENSOR FOR THE STEEL CORROSION IN CONCRETE

Experimental Study on Rebar Corrosion Using the Galvanic Sensor Combined with the Electronic Resistance Technique.

Corrosion risk assessment of chloride-contaminated concrete structures using embeddable multi-cell sensor system

Threshold Chloride Levels for Localized Carbon Steel Corrosion in Simulated Concrete Pore Solutions Using Coupled Multielectrode Array Sensors