Abstract:The interface of carbon-fiber-reinforced aluminum matrix (Cf/Al) composites fabricated by the pressure infiltration method with different Mg contents (0, 3.2, 4.5, 6.5, and 8.5 wt pct) was observed by transmission electron microscopy (TEM) and high-resolution transmission electron microscopy (HRTEM). The Gibbs free energy of Al4C3 and Al3Mg2 was calculated by an extended Miedema model and a Wilson equation. The effect of Mg on the critical nuclear size of Al4C3 was discussed also. The size and number of Al4C3 decreased and transformed from needle-like to blocky with Mg content, and no Al4C3 but blocky β phase (Al3Mg2) was observed at the C-Al interface in the Cf/Al-8.5Mg composite. Increased Mg content in the Al matrix would increase the Gibbs free energy of Al4C3 but decrease that of the Al3Mg2 phase. The critical value of the Mg content, above which the formation of Al3Mg2 would be easier than Al4C3, was 8.8 wt pct when the C activity was 0.0013, which agreed well with the TEM observation. The critical nucleation size of Al4C3 \( \left( {t_{{{\text{Al}}_{4} {\text{C}}_{3} }}^{*} } \right) \) increased slowly within a low Mg content (less than 8.5 wt pct) and then abruptly after that, indicating the formation of Al4C3 is inhibited significantly in thermodynamic environments. The calculated \( t_{{{\text{Al}}_{4} {\text{C}}_{3} }}^{*} \) in the Cf/Al-6.5Mg composite was 26.3 nm, which was consistent with the HRTEM observation (24 nm).

The Effect of Aluminum Content on Tio2 Coated Carbon Fiber Reinforced Magnesium Alloy Composites

Effects of Tio2 Coating on Microstructure and Mechanical Properties of Magnesium Matrix Composite Reinforced with Mg(2)B(2)O(5)W

Micro-structural and tensile strength analyses on the magnesium matrix composites reinforced with coated carbon fiber

Effect of Cu Content on Microstructure and Properties of Al2o3-Sio2 Fiber Reinforced Aluminum Matrix Composites

Interfacial Modification Using Matrix Alloying in Mg/CNT Composites for Improved Mechanical Performance

Effect of interfacial stability on microstructure and properties of carbon fiber reinforced aluminum matrix composites

Effect of Al content on impact resistance behavior of Al-Ti-B4C composite fabricated under air atmosphere

Effect of Ti particles on microstructure and mechanical properties of Mg–9Al–1Zn based composite sheets

Influence of Cu content on interfacial microstructure of Al2O3-SiO2 fiber reinforced Al matrix composites

The Effect of Ti Particles Addition on the Microstructure and Mechanical Behavior of Mg AZ31/Al 6082 Composite Sheets

Influence of Ti-6Al-4V particles on the interfacial microstructure and strength-ductility synergetic mechanism of AZ91 magnesium alloy

Effect of Mg Content on the Thermodynamics of Interface Reaction in Cf/Al Composite

Influence of Cu content on interfacial structure and mechanical properties of 3Al2O32SiO2 fiber reinforced Al matrix composites

Effect of Mg Content on the Mechanical Properties and Microstructure of Gr(F)/Al Composite

Effect of Ti6Al4V reinforcement particles on the mechanical, wear, and corrosion properties of AZ91D magnesium matrix composites

Preparation and Performance of the Magnesium Matrix Composite Reinforced with Al2O3-SiO2 Short Fibers

Effect of coating Al2O3 reinforcing particles on the interface and mechanical properties of 6061 alloy aluminium matrix composites

Processing and Mechanical Properties of Ti<sub>2</sub>AlC MAX Phase Reinforced AE44 Magnesium Composite

Study on TiCp/Al Master Alloy in Magnesium Matrix Composites

Effectively enhanced strength by interfacial reactions in in-situ carbon reinforced Al matrix composites

Interfacial microstructure and mechanical properties of Cf/AZ91D composites with TiO2 and PyC fiber coatings