Abstract:Abstract The energy dissipation in sinusoidally driven particle dampers is highly dependent on the motion mode of the particle bed. Especially, for applications of low acceleration intensity, i.e., acceleration amplitude below gravitational acceleration, only small energy dissipation rates are obtained so far, due to sticking of particles. Here, a new and more efficient design of particle dampers is introduced for such applications, whereby the focus is on horizontal vibrations. The proposed design makes use of the rolling property of spheres inside particle containers with flat bases. First, a cuboid container shape is studied. Two different motion modes are observed experimentally within this container shape. For low driving amplitudes, the particle bed is showing a scattered behavior resulting in a low damping efficiency. For high driving amplitudes instead, the rolling collect-and-collide state is observed resulting in much higher efficiency. Analytical descriptions for the energy dissipation are derived for both motion modes, being in good agreement with experimental measurements. It is obtained that the optimal working point of such dampers, i.e., the optimal stroke, is only depending on the filling ratio of the damper. Additionally, the optimal working point separates both motion modes. For lower strokes as the optimal one, the scattered state is observed, while for higher strokes the rolling collect-and-collide mode is seen. Sensitivity analyses are performed using the experimental setup and discrete element simulations. It is obtained that especially a low friction coefficient and a high particle radius are beneficial. On the other hand, a small tilt around the container’s longitudinal or pitch axis might significantly decrease the efficiency of the damper. Besides the cuboid container, the effect of a cylindrical container heading against gravity is analyzed. While the particle bed motion modes are only little influenced, the efficiency of the damper becomes independent of the excitation direction in the horizontal plane. Thus, such dampers could be applied to a large field of applications in mechanical and civil engineering.

A Design Method of Position Schemes for Particle Dampers Applied to A Flywheel

Quantitative Analysis of Tubular Dual-Armature Switched Flux Permanent Magnet Machines for Shock Absorbers

An investigation on the field strength and loading rate dependences of the hysteretic dynamics of magnetorheological dampers

Optimal Design of Magnetic System for the Magnetorheological Intelligent Damper

Research On Dynamic Characteristics Of A Magnetorheological Damper With Decoupling Mechanism

Studies of the performance of particle dampers attached to a two-degrees-of-freedom system under random excitation

Discrete Element Method Numerical Investigation on the Particle Damper

Experimental and optimization analysis of a multiple unidirectional single-particle damper

Energy dissipation in horizontally driven particle dampers of low acceleration intensities

A ROUTE TO DESIGN ROTARY MAGNETORHEOLOGICAL DAMPERS

Design of a particle damper and experimental study on vibration damping of the pipeline

Comparative Studies on Structures with a Tuned Mass Damper and a Particle Damper

Optimal design of inerter‐based nonpacked particle damper considering particle rolling

A Disc-Type Magneto-Rheologtic Fluid Damper

Experimental and Theoretical Investigations on an Asynchronized Parallel Double‐Stage Viscous Fluid Damper

Numerical simulation and dynamic experimental investigation on vibration control of a structural system with a stacked single particle‐inerter damper

Studies on dissipative characteristics and equivalent model of particle damper in railway application

Optimal design for working clearance of rotary MRF dampers

3D FSI FEA SIMULATION AND ANALYSES OF THE DYNAMIC CHARACTERISTICS OF A DISPLACEMENT-SENSITIVE LIQUID DAMPER

Two-way coupled MBD–DEM modeling and experimental validation for the dynamic response of mechanisms containing damping particles

Parameter Design and Location Optimum Practical Method of Viscoelastic Dampers