Abstract:Bubble formation inside a microscale channel is a significant problem in general microfluidic experiments. The problem becomes especially crucial when performing a polymerase chain reaction (PCR) on a chip which is subject to repetitive temperature changes. In this paper, we propose a bubble-free sample injection scheme applicable for continuous-flow PCR inside a glass/PDMS hybrid microfluidic chip, and attempt to provide a theoretical basis concerning bubble formation and elimination. Highly viscous paraffin oil plugs are employed in both the anterior and posterior ends of a sample plug, completely encapsulating the sample and eliminating possible nucleation sites for bubbles. In this way, internal channel pressure is increased, and vaporization of the sample is prevented, suppressing bubble formation. Use of an oil plug in the posterior end of the sample plug aids in maintaining a stable flow of a sample at a constant rate inside a heated microchannel throughout the entire reaction, as compared to using an air plug. By adopting the proposed sample injection scheme, we demonstrate various practical applications. On-chip continuous-flow PCR is performed employing genomic DNA extracted from a clinical single hair root sample, and its D1S80 locus is successfully amplified. Also, chip reusability is assessed using a plasmid vector. A single chip is used up to 10 times repeatedly without being destroyed, maintaining almost equal intensities of the resulting amplicons after each run, ensuring the reliability and reproducibility of the proposed sample injection scheme. In addition, the use of a commercially-available and highly cost-effective hot plate as a potential candidate for the heating source is investigated.

A Simple and Practicable PCR-Microchip with Bubble-Free Stationary Chamber

Polymerase Chain Reaction Chip with Microchannel of Glass Capillaries Embedded

Microfluidic handling of PCR solution and DNA amplification on a reaction chamber array biochip

Simulation and experimental study of PCR chip based on silicon

Complete Prevention of Bubbles in a PDMS-Based Digital PCR Chip with a Multifunction Cavity

Bubble-free on-chip continuous-flow polymerase chain reaction: concept and application

Design and Thermal Analysis of a Micro-Chamber PCR Integrated Chip

Design and Experiment of a PDMS-based PCR Chip with Reusable Heater of Optimized Electrode

The Design And Manufacture Of Functional Micro-Stationary Pcr Chip

Air Bubble Resistant and Disposable Micropcr Chip with a Portable and Programmable Device for Forensic Test

DNA Amplification on a PDMS–glass Hybrid Microchip

Microfluidic PCR Chips

A PCR Chip with Reusable Electrodes and Its Temperature Analysis

Analysis on PCR Chip With Reusable Electrodes and its Temperature Field

Pcr Microchip Array Based on Polymer Bonding Technique

Droplet Based Micro Oscillating Flow-Through PCR Chip

Overcoming bubble formation in polydimethylsiloxane-made PCR chips: mechanism and elimination with a high-pressure liquid seal

Facile Prepared Microfluidic Chip for Multiplexed Digital RT-qPCR Test

Some key problems in PMMA based PCR microfluidic biochip by excimer laser micromachining

A Microchip-Based PCR Device Using Flexible Printed Circuit Technology

Droplet-based Micro Oscillating-Flow PCR Chip