Abstract:Corrugated tubes are extensively unitized in enhancing heat transfer within tubular heat exchange devices. The efficiency of these corrugated tubes is closely linked to the geometric characteristics of the surface corrugations. In this study, we conducted an extensive series of Large Eddy Simulations on a representative type of enhanced tube featuring periodic inward corrugations (PIC). Our goal was to compile a comprehensive and precise dataset of the thermal and hydraulic properties specific to this design. The key design parameters that define the corrugated patterns are corrugation height (H), corrugation width (W), and the length of the straight section (P). We systematically explored these parameters to understand their impact on heat transfer and fluid dynamics . Among these parameters, corrugation height (H) has been identified as the most influential factor affecting flow and heat transfer properties. As the corrugation height varies from 1/8D to 3/8D, we observed a substantial increase in the friction factor and Nusselt number by a factor of 209 and 5, respectively, at Re = 1000; while the critical Reynolds number decreased roughly from 800 to 100. These findings underscore the significant role of corrugation height in shaping the flow and heat transfer performance of PIC tubes. The other two parameters, corrugation width and straight section length, were also found to be crucial in determining the overall heat transfer coefficient and pressure drop. When Re = 1000, variations in W/D from 1 to 3 resulted in a 1.3-fold increase in both the f and the Nu . Furthermore, altering the P/D from 2 to 6 led to a 2.1-fold increase in f and a 2.2-fold increase in Nu . The results of our study suggest that when utilizing this type of corrugated tubes, careful consideration is required to strike an optimal balance between heat transfer efficiency and pressure loss. The large-sets LES results presented in this paper can serve as valuable inputs for optimizing the design of PIC tubes.

Rst Model for Turbulent Flow and Heat Transfer Mechanism in an Outward Convex Corrugated Tube

Influence of Geometrical Parameters on Turbulent Flow and Heat Transfer Characteristics in Outward Helically Corrugated Tubes

Heat Transfer Study of a Hybrid Smooth and Spirally Corrugated Tube

Numerical Investigation of Tube-Side Fully Developed Turbulent Flow and Heat Transfer in Outward Corrugated Tubes

Prediction of Forced Gas Flows in Circular Tubes at High Heat Fluxes Accompanied by Laminarization

Heat Transfer and Flow Resistance in Crossflow over Corrugated Tube Banks

A geometric study on shell side heat transfer and flow resistance of a six-start spirally corrugated tube

Large Eddy Simulation of Turbulent Flow and Heat Transfer in Outward Transverse and Helically Corrugated Tubes

Numerical Simulation of Turbulent Structure and Particle Deposition in a Three-Dimensional Heat Transfer Pipe with Corrugation

NUMERICAL AND EXPERIMENTAL STUDY OF FLOW AND HEAT TRANSFER IN OUTWARDLY CONVEX CORRUGATED TUBES WITH A TWISTED TAPE INSERT

Turbulence Models for Fluid Flow and Heat Transfer Between Cross-Corrugated Plates

Numerical Investigation of Entropy Generation of Turbulent Flow in a Novel Outward Corrugated Tube

Experimental and numerical characterization of single-phase pressure drop and heat transfer enhancement in helical corrugated tubes

Entropy Generation Analysis of Fully-Developed Turbulent Heat Transfer Flow in Inward Helically Corrugated Tubes

An Assessment of Heat Transfer Models of Water Flow in Helically Coiled Tubes Based on Selected Experimental Datasets

Comparison Between Heat Transfer to Supercritical Water in A Smooth Tube and in an Internally Ribbed Tube

Large eddy simulation of flow and heat transfer performance in periodically inward corrugated tubes

Pressure Drop, Heat Transfer and Performance of Single-Phase Turbulent Flow in Spirally Corrugated Tubes

Numerical study on fully-developed turbulent flow and heat transfer in inward corrugated tubes with double-objective optimization

Analysis of supercritical heat transfer in horizontal helical tube with internal roughness

A numerical study on the flow over a novel tube for heat-transfer enhancement with a linear Eddy-viscosity model