Abstract:For cylindrical shells under axial compression, the essence of initial geometric imperfections is the superposition of local out-of-plane deformations of various forms, which may facilitate the development of buckling deformations, thus leading to a significant knockdown of the load-carrying capacity. It is very challenging for existing methods to provide an accurate prediction of the lower bound on a load-carrying capacity before the structure is fabricated. Therefore, it is crucial to find a type of assumed imperfection that will allow us to approximate lower bounds for shells in the design stage. Five 1-m-diameter unstiffened shells, termed W1-W5, are designed, analysed and tested. The measured imperfection approach, single-perturbation load approach (SPLA), worst multiple-perturbation load approach (WMPLA), and a Combined Approach for measured imperfections and superimposed radial point load imperfections are compared with test results. The results show that the SPLA-based methods produce higher KDFs than the test results and are sensitive to the distribution of the measured imperfections. In contrast, the KDFs predicted by the WMPLA and the Combined Approach are similar to one another and very close to the test results. From the comparison results, it can preliminarily be concluded that the WMPLA is able to envelop the small- and large-amplitude measured imperfections, which has the potential to predict a rational lower bound on the buckling loads of unstiffened cylindrical shells. The WMPLA should be extended to the design of other types of thin-walled structures with caution, because the manufacturing signature may be distinctly changed for different processes, and the buckling tests of other types of structures would be carried out in future study.

Improved knockdown factors for cylindrical shells using worst multi-perturbation load approach

Worst Multiple Perturbation Load Approach of stiffened shells with and without cutouts for improved knockdown factors

Improved knockdown factors for composite cylindrical shells with delamination and geometric imperfections

Experimental Validation of Cylindrical Shells under Axial Compression for Improved Knockdown Factors

Knockdown factor of buckling load for axially compressed cylindrical shells: state of the art and new perspectives

Buckling Strength of Tapered Cylindrical Shells under Partial Axial Compression: Effect of Circumferential Weld-Induced Imperfections

Form of Circumferential Weld-Induced Imperfections for Tapered-Wall Cylindrical Shell Structures

Determination of Realistic Worst Imperfection for Cylindrical Shells Using Surrogate Model

Advances in Buckling Analysis of Axial Compression Loaded Thin-walled Cylindrical Shells Based on Initial Imperfection Sensitivity

Numerically and Experimentally Predicted Knockdown Factors for Stiffened Shells under Axial Compression

Design of Axially Loaded Isotropic Cylindrical Shells Using Multiple Perturbation Load Approach – Simulation and Validation

Advanced buckling analysis and optimization methods for aerospace stiffened shells

A New Design Method For Axially Loaded Thin-Walled Cylindrical Shells Based On Elasto-Plastic Buckling Analysis

Buckling Behavior Analysis of Thin-Walled Cylindrical Shell Structure under Localized Axial Compression Load Based on Initial Imperfection Sensitivity

Robust Knockdown Factors for the Design of Cylindrical Shells under Axial Compression: Analysis and Modeling of Stiffened and Unstiffened Cylinders

Imperfection-insensitive Design of Stiffened Conical Shells Based on Equivalent Multiple Perturbation Load Approach

Localized Perturbation Load Approach for Buckling Design of Thin-Walled Steel Cylindrical Shells under Partial Axial Compression

A New Robust Design for Imperfection Sensitive Stiffened Cylinders Used in Aerospace Engineering

Buckling of Quasi-Perfect Cylindrical Shell under Axial Compression: A Combined Experimental and Numerical Investigation

Influence of imperfection distributions for cylindrical stiffened shells with weld lands

Numerical Study on Buckling Behaviors of Thin-Walled Longitudinal Corrugated Cylindrical Shells under Axial Compression Loads