Abstract:Light-emitting diodes (LEDs) are used widely, but when operated on low-voltage direct current (DC), they consume unnecessary power because a converter must be used to convert alternating current (AC). DC flow across devices also causes charge accumulation under high current density, leading to lowered LED reliability. By contrast, gallium-nitride-based LEDs can be operated without an AC–DC converter being required, potentially leading to greater energy efficiency and reliability. This study developed a multicolor AC-driven light-emitting device by integrating the WSe2 monolayer and AlGaInP–GaInP multiple quantum well (MQW) structures. The CVD-grown WSe2 monolayer was placed on the top of an AlGaInP-based light-emitting diode (LED) wafer to create a two-dimensional/three-dimensional heterostructure. The interfaces of the hybrid devices are characterized and verified through transmission electron microscopy and energy-dispersive X-ray spectroscopy techniques. More than 20% energy conversion from the AlGaInP MQWs to the WSe2 monolayer was observed to boost the WSe2 monolayer emissions. The voltage dependence of the electroluminescence intensity was characterized. Electroluminescence intensity–voltage characteristic curves indicated that thermionic emission was the mechanism underlying carrier injection across the potential barrier at the Ag–WSe2 monolayer interface under low voltage, whereas Fowler–Nordheim emission was the mechanism at voltages higher than approximately 8.0 V. This multi-color hybrid light-emitting devices both expand the wavelength range of 2-D TMDC-based light emitters and support their implementation in such applications as chip-scale optoelectronic integrated systems, broad-band LEDs, and quantum display systems.

Direct-Current and Alternating-Current Driving Si Quantum Dots-Based Light Emitting Device

All‐Inorganic Perovskite Quantum Dots/p‐Si Heterojunction Light‐Emitting Diodes under DC and AC Driving Modes

White light-emitting quantum dot diodes and tuning of luminescence processes

Light-emitting Diodes Based on Colloidal Silicon Quantum Dots

Device Physics and Device Chemistry of Quantum-Dot Light-Emitting Diodes

Optoelectronic System and Device Integration for Quantum-Dot Light-Emitting Diode White Lighting with Computational Design Framework

Efficient silicon quantum dots light emitting diodes with an inverted device structure

Light-Emitting Diodes Based on Colloidal Silicon Quantum Dots with Octyl and Phenylpropyl Ligands.

Alternating Current-Driven Quantum-Dot Light-Emitting Diodes with Planar Architecture

Electroluminescent Devices Based on Amorphous SiN/Si Quantum Dots/amorphous SiN Sandwiched Structures

Household alternating current electricity plug-and-play quantum-dot light-emitting diodes

Anomalous Efficiency Elevation of Quantum-Dot Light-Emitting Diodes Induced by Operational Degradation.

Research Progress in Application of Silicon Quantum Dots in Optoelectronic Devices

Color Controllable Smart White Lighting Based on Various Device Architectures of Electrically Driven Quantum-Dot Light-Emitting Diodes

AC-Driven Multicolor Electroluminescence from a Hybrid WSe2 Monolayer/AlGaInP Quantum Wells Light-Emitting Device

Transparent quantum dot light-emitting diodes with a current focusing structure

Pulsed-laser micropatterned quantum-dot array for white light source

Electroluminescence with Micro-Watt Output from Ultra-Small Sized Si Quantum Dots/amorphous SiO2 Multilayers Prepared by Laser Crystallization Method

Low Power Consumption Red Light-Emitting Diodes Based On Inorganic Perovskite Quantum Dots Under An Alternating Current Driving Mode

Emission cells with quantum dots on silicon chip prepared by using fs pulsed laser

Electrically Driven Luminescence of Nanocrystalline Si/SiO2 Multilayers on Various Substrates