Abstract:A solution to increase the use of natural gas in U.S. is to convert existing diesel engines to natural-gas spark-ignition operation through the addition of a gas injector in the intake manifold and of a spark plug in place of the diesel injector. This study presents experimental and numerical simulation results of flame propagation inside a such converted engine. Compared to the conventional theory of flame propagation inside a spark ignition engine, the results showed that the combination of strong radial inward movement and tumble resulted in a strong turbulence inside the bowl compared to the low turbulence intensity inside the squish region. After ignition, the characteristic turbulence distribution partitioned the combustion into two separated events: a fast, thick flame inside the bowl but a slow, thinner, and delayed flame inside the squish region, a feature unique to the lean-burn natural-gas spark-ignition combustion inside a bowl-in-piston geometry. Specifically, the high turbulence inside the bowl increased the local flame speed. By contrast, the squish experienced a much lower turbulence, which, combined with the higher surface/volume ratio, reduced the turbulent flame speed. In addition, the overlap between the fast- and the slow-burn events, which determined the phasing and the amount of fuel inside the squish, was controlled by the combustion phasing. For example, advancing the burning inside the bowl increased the fraction of fuel burning in the late combustion stage, which also increased the phasing difference between the fast- and the slow-burn events and produced a secondary peak in the apparent heat release rate. As the less-favorable combustion conditions inside the squish region would increase carbon monoxide and unburned hydrocarbons emissions, this study suggests that combustion strategies in diesel engines converted to lean NG SI operation should minimize the amount of fuel burning in the squish region.

Three-dimensional Simulation on Combustion Characteristics of Natural Gas Engine with Bathtub Combustion Chamber

Numerical Simulation Of Re-Entrant Bowl Effects On Natural-Gas Spark-Ignition Operation

Effect of Piston Crevices on 3D Simulation of a Heavy-Duty Diesel Engine Retrofitted to Natural Gas Spark Ignition

Numerical Simulation of Re-Entrant Bowl Effects on Natural Gas SI Operation

Effect Of Piston Crevices On The Numerical Simulation Of A Heavy-Duty Diesel Engine Retrofitted To Natural-Gas Spark-Ignition Operation

Effect of Bowl-in-Piston Chamber on the Combustion Process in a Stoichiometric Natural-Gas Spark-Ignition Engine

An Experimental Investigation of Early Flame Development in an Optical Spark Ignition Engine Fueled with Natural Gas

Methodology to Separate the Two Burn Stages of Natural-Gas Lean Premixed-Combustion Inside a Diesel Geometry

Optical and Numerical Investigations of Flame Propagation in a Heavy Duty Spark Ignited Natural Gas Engine

Two-Stage Lean-Burn Combustion Inside a Natural-Gas Spark-Ignition Engine with a Bowl-in-Piston Chamber

Investigation of Multistage Combustion Inside a Heavy-Duty Natural-Gas Spark-Ignition Engine Using Three-Dimensional Computational Fluid Dynamics Simulations and the Wiebe-Function Combustion Model

3D CFD simulation of a CI engine converted to SI natural gas operation using the G-equation

An Experimental Study of the Combustion Process in a Natural-Gas Spark-Ignition Engine

Twin-Peak Heat Release Phenomenon Inside a Heavy-Duty Diesel Engine Retrofitted to Natural-Gas Spark Ignition

Numerical Investigation of Pre-Chamber Jet Combustion in a Light-Duty Gasoline Engine

Combustion partitioning inside a natural gas spark ignition engine with a bowl-in-piston geometry

Numerical Simulation of Gasoline Stratified Charge Compression Ignition Using 3D-CFD Coupled with Detailed Chemistry

Experimental study of pre-chamber jet ignition in a rapid compression machine and single-cylinder natural gas engine

Fundamental Study on Combustion Improvement by Mixture-Flow in Natural Gas-Fueled Lean-Burn SI Engines

Investigations on combustion system optimization of a heavy-duty natural gas engine

3D Numerical Simulation of Spray and Combustion Process for In-cylinder DI Gasoline Engine