Abstract:Silica fiber optic sensors are resistant to corrosive environments and high temperatures, making them attractive candidates for harsh conditions found in nuclear and aerospace industries. Moreover, fibers can be deployed remotely for continuous measuring of spatially distributed temperatures and strains. This study investigated embedding a Ni/Cu bi-metallic coated fiber in a stainless-steel 316 (SS316) matrix using laser powder bed fusion towards functionalizing metal components for site-specific health monitoring. The embedded fiber was continuously interrogated during controlled heating to 1000°C. The measured fiber strains were similar to the expected differential thermal strains between the fiber and the SS316 matrix, until divergent behavior was observed at temperatures >500°C. No debonding at the matrix–coating–fiber interfaces was observed during microscopy, but significant interactions between the coatings and matrix resulted in diffusion-driven chemistry variations and Kirkendall void formation. Applying the strain-lag theory revealed plastic behavior in the Ni coating at temperatures >500°C, limiting the strain transfer to the fiber at higher temperatures. It was estimated that the elastic modulus in the Ni coating had decreased from ~200 GPa at room temperature to below 40 GPa, starting at 600°C. The low elastic modulus above 600°C is within the margin of what the tangent modulus would be in the case of bilinear isotropic hardening. Regardless of the divergent strain transfer at higher temperatures, the fiber was exposed to the equivalent of 1.9% engineering strain at 1000°C, but measured only a 0.7% engineering strain due to the poor strain transfer. Although compensating for the plastic behavior of Ni proved challenging, the bonding of a brittle silica fiber to a metal matrix surviving to 1000°C invites potential iterations on coating material for future application. For example, the embedded fiber is sufficient for acoustic energy transfer, realizing high temperature distributed acoustic sensing.

Fabrication and Characterization of A Metal-Packaged Regenerated Fiber Bragg Grating Strain Sensor for Structural Integrity Monitoring of High-Temperature Components

Structural Instability-Enabled Mechanical Sensors Using Fiber Bragg Grating

An Improved Metal-Packaged Strain Sensor Based on A Regenerated Fiber Bragg Grating in Hydrogen-Loaded Boron–Germanium Co-Doped Photosensitive Fiber for High-Temperature Applications

Fatigue Behavior of Metal-Packaged Regenerated Fiber Bragg Grating Strain Sensors at High Temperatures: A Preliminary Study

Fabrication and Thermal Characteristics of Multilayer Metal-Coated Regenerated Grating Sensors for High-Temperature Sensing

Real-time Monitoring of Bolt Clamping Force at High Temperatures Using Metal-Packaged Regenerated Fiber Bragg Grating Sensors

A Study of Tensile and Fatigue Loading Effects on the Performance of Metal-Packaged FBG Strain Sensor Developed for Cryogenic Applications

Non-Gel Encapsulation Process of a High Temperature Strain Fiber Bragg Grating Sensor and Its Sensing Properties

Development of Highly-Sensitive and Reliable Fiber Bragg Grating Temperature Sensors With Gradient Metallic Coatings for Cryogenic Temperature Applications

Fabrication and thermal characteristics of Ti-Ag-Ni coated regenerated grating sensors for high-temperature sensing

Distributed Strain Sensing Using Bi-Metallic Coated Fiber Optic Sensors Embedded in Stainless Steel

Dynamic large strain measurement under high-temperature environment using a modified FBG sensor and plasma surface treatment

Temperature Sensing of Metal-Coated Fiber Bragg Grating

Development of High-Temperature Wire-Grid Thin Film Strain Gauges

Thermal Strain Measurement of EAST Tungsten Divertor Component with Bare Fiber Bragg Grating Sensors

Cascaded Fabry-Perot cavity and fiber Bragg grating on sapphire fibers for high-temperature strain sensing

Highly Integrated All-Fiber FP/FBG Sensor for Accurate Measurement of Strain under High Temperature

Mechanical Characteristic Analysis of Special Hybrid Adhesive-Packaged FBG Strain Sensor at Liquid Helium Environment

Design and analysis of fiber Bragg grating sensor to monitor strain and temperature for structural health monitoring

Combined Regenerated Fibre Bragg Gratings and Fabry-Perot Etalons for Dual Strain and Temperature Sensing

A Temperature and Strain Sensor Based on a Cascade of Double Fiber Bragg Grating