Abstract:Shape-memory polymers (SMP) composites have attracted significant attention from both industrial and academic researchers due to their useful and fascinating functionality. Generally, SMP can be actuated by heat, electricity, water and chemicals. A large amount of work has been done on the shape recovery of shape memory polymers blended with conductive filler triggered by electrical resistive heating. However, the conductive filler will dramatically undermine the shape memory behavior and there is no effective way to increase the conductivity without compromise on the shape memory behavior. In this work, carbon nanofiber (CNF) paper and bucky paper were introduced to actuate shape memory polymer, respectively. The shape recovery of polymer was carried out by electrical resistive heating generated by CNF paper and bucky paper which were attached to the surface of the SMP composites. Also, both of them possess excellent heat conductive properties which can serve as a conductive layer to transmit heat through the polymer. It was found that using this kind of structure the recoverability approximated to 100%. In addition, the geometry position in the composites of both types of paper was optimized to acquire the most efficient heat transfer rate from the paper to the SMP. After that, the structures of both CNF paper and bucky paper have been characterized by scanning electronic microscopy. Also, the electrical volume resistivity of the nanocomposite incorporated with different volume fractions of carbon nanofiber paper was measured by four-point probe method. The shape recovery process of the composites driven by resistive heating was recorded. The thermo-mechanical properties of the nanocomposites with respect to various volume fractions of carbon nanofiber paper were analyzed by dynamic mechanical analysis (DMA).

Self-assembled Multi-Layered Carbon Nanofiber Nanopaper for Significantly Improving Electrical Actuation of Shape Memory Polymer Nanocomposite

Electroactive Shape-Memory Polymer Nanocomposites Incorporating Carbon Nanofiber Paper

Shape memory polymer nanocomposites based on carbon nanopaper

Shape Memory Polymer Carbon Nanocomposites; Based on Carbon Nanopaper

Synergistic Effect of Carbon Nanofiber and Carbon Nanopaper on Shape Memory Polymer Composite

Actuation Of Shape Memory Polymer By Resistive Heating Of Carbon Nanopaper

Electrical Properties and Shape-Memory Behavior of Self-Assembled Carbon Nanofiber Nanopaper Incorporated with Shape-Memory Polymer

Synergistic Effect of Ag Nanoparticle-Decorated Graphene Oxide and Carbon Fiber on Electrical Actuation of Polymeric Shape Memory Nanocomposites

Magnetically Aligned Carbon Nanotube in Nanopaper Enabled Shape-Memory Nanocomposite for High Speed Electrical Actuation

High-Performance Multifunctional Shape Memory Epoxy with Hybrid Graphene Oxide and Carbon Nanotube Reinforcement

Synergistic Effect Of Carbon Nanofiber And Sub-Micro Filamentary Nickel Nanostrand On The Shape Memory Polymer Nanocomposite

Mechanical and Shape Recovery Properties of Shape Memory Polymer Composite Embedded with Cup-Stacked Carbon Nanotubes

Shape memory polymer nanocomposites with carbon nanofiber paper

Surface Grafting of Carbon Fibers with Artificial Silver‐nanoparticle‐decorated Graphene Oxide for High‐speed Electrical Actuation of Shape‐memory Polymers

Conductive Nanoparticles in Electro Activated Shape Memory Polymer Sensor and Actuator

Shape Memory Nanocomposite and Its Application

Remote Controlled Multishape Polymer Nanocomposites with Selective Radiofrequency Actuations

Self-recovery and self-conducting epoxy-based shape memory polymer microactuator

Improving the Electrical Conductivity by Forming Ni Powder Chains in a Shape-Memory Polymer Filled with Carbon Black

Shape-Memory Polymer Nanocomposites with A 3d Conductive Network for Bidirectional Actuation and Locomotion Application

Surface coating of multi-walled carbon nanotube nanopaper on shape-memory polymer for multifunctionalization