Abstract:Honeycomb structures have found numerous applications as structural and biomedical materials due to their favourable properties such as low weight, high stiffness, and porosity. Application of additive manufacturing and 3D printing techniques allows for manufacturing of honeycombs with arbitrary shape and wall thickness, opening the way for optimizing the mechanical and physical properties for specific applications. In this study, the mechanical properties of honeycomb structures with a new geometry, called octagonal honeycomb, were investigated using analytical, numerical, and experimental approaches. An additive manufacturing technique, namely fused deposition modelling, was used to fabricate the honeycomb from polylactic acid (PLA). The honeycombs structures were then mechanically tested under compression and the mechanical properties of the structures were determined. In addition, the Euler-Bernoulli and Timoshenko beam theories were used for deriving analytical relationships for elastic modulus, yield stress, Poisson's ratio, and buckling stress of this new design of honeycomb structures. Finite element models were also created to analyse the mechanical behaviour of the honeycombs computationally. The analytical solutions obtained using Timoshenko beam theory were close to computational results in terms of elastic modulus, Poisson's ratio and yield stress, especially for relative densities smaller than 25%. The analytical solutions based on the Timoshenko analytical solution and the computational results were in good agreement with experimental observations. Finally, the elastic properties of the proposed honeycomb structure were compared to those of other honeycomb structures such as square, triangular, hexagonal, mixed, diamond, and Kagome. The octagonal honeycomb showed yield stress and elastic modulus values very close to those of regular hexagonal honeycombs and lower than the other considered honeycombs.

Mechanical Properties of a Hollow-Cylindrical-joint Honeycomb

Advanced honeycomb designs for improving mechanical properties: A review

Mechanical properties of additively manufactured octagonal honeycombs

Study on the Design and Mechanical Properties of a Novel Hexagonal Cell Body Topology

Mechanics of Natural Honeycomb As Paradigm for Design of Unconventional Cellular Materials

Modularizing honeycombs for enhancement of strength and energy absorption

Mechanical Properties and Energy Absorption of 3D Printed Double-Layered Helix Honeycomb under In-Plane Compression

Equivalent In-Plane Elastic Moduli of Honeycomb Materials under Hypergravity Conditions

Mechanical properties of super honeycomb structures based on carbon nanotubes.

Evaluation of the influence of design in the mechanical properties of honeycomb cores used in composite panels

Mechanical Behavior of 3D-Printed Thickness Gradient Honeycomb Structures

Reliable comparison of multi-directional mechanical properties for biomimetic circle arc honeycombs

Mechanical Properties and Energy Absorption of 3D Printed Square Hierarchical Honeycombs under In-Plane Axial Compression

Fabrication and mechanical properties of CFRP honeycomb cylinder based on the transforming from the flat honeycombs

Effects of different joint wall lengths on in-plane compression properties of 3D braided jute/epoxy composite honeycombs

Investigation into quasi-static compressive behaviors of several kinds of honeycomb like structures in three axial directions

Hybrid hierarchical square honeycomb with widely tailorable effective in-plane elastic modulus

An approach on identification of equivalent properties of honeycomb core using experimental modal data

Experimental and numerical analysis of a bolted reinforced honeycomb with tunable Poisson's ratio

Novel 2D star-shaped honeycombs with enhanced effective Young’s modulus and negative Poisson’s ratio

In-plane elasticity of a novel arcwall-based double-arrowed auxetic honeycomb design: Energy-based theoretical analysis and simulation