Abstract:Sulfide-based all-solid-state Li-ion batteries (ASSLIBs) are recognized as promising next-generation batteries, due to its advantage of high energy density, high safety and high Li+ diffusivity in sulfide solid electrolytes (SEs). However, interfacial instability between cathode (like LiCoO2) and sulfide SEs hinders its commercial applica-tions. Herein, a simple mechanochemical strategy, which mechanically mixed polyanionic borate precursor and Li2CO3 residue on LiCoO2 (LCO) cathode with subsequent thermochemical reactions, was proposed to achieve analogous "solid electrolyte interphase (SEI)" to address such issues. The artificial SEI consists of crystalline LiBa (B3O5)3 (LBBO), Li3BO3 (LBO) and amorphous lithium boron oxide (Li-B-O). Therein, the former two endow high interfacial stability with SEs and ionic conductivity respectively, while the latter presented in the former interspace isolated the LCO cathode from Li10GeP2S12 (LGPS) solid electrolyte and constructed a continuous interlayer with LBBO and LBO. According to the phase diagram and direct observation through TEM, it is confirmed that a suitable ratio of raw LBBO precursor and Li2CO3 residue can realize an appropriate proportion of LBO to balance the interfacial stability and the diffusion of Li+ in obtained artificial interlayer, which enables high cyclability and rate performance in LCO/LGPS/Li-In ASSLIBs. Specifically, SEI with 9.4 mol.% LBO boosts an initial discharge capacity of 153.8 mAh g+1 (2.6-4.3 V (vs. Li/Li+), 0.1 C) with 74.4 % retention (150 cycles) and an excellent rate capability of 92.9 and 56.1 mAh g+1 at 1 C and 2 C respectively. Upon increased cut-off voltage of 4.5 V, an initial 167.3 mAh g+1 capacity (0.2 C) and 64.7 % retention (150 cycles) can also be ach-ieved. The present strategy utilizing mechanochemical reactions between polyanionic borate and Li2CO3 residue to construct analogous SEI will offer fresh insights to stabilize the electrode/electrolyte interface of ASSLIBs derived from diverse polyanionic-type borates or phosphates, which can be widely used in other all-solid-state batteries with various cathodes and electrolytes.

Effect of Sulfolane on the Morphology and Chemical Composition of the Solid Electrolyte Interphase Layer in Lithium Bis(oxalato)borate‐based Electrolyte

Modulation of solid electrolyte interphase of lithium-ion batteries by LiDFOB and LiBOB electrolyte additives

Improving High-Voltage Performance of Lithium-Ion Batteries with Sulfolane As an Electrolyte Additive

Mechanochemical Reactions Between Polyanionic Borate and Residue Li2CO3 on LiCoO2 to Stabilize Cathode/electrolyte Interface in Sulfide-Based All-Solid-state Batteries

Effects of soluble products decomposed from chelato-borate additives on formation of solid electrolyte interface layers

Solid Electrolyte Interface Film-Forming and Surface-Stabilizing Bifunctional 1,2-Bis((trimethylsilyl)oxy) Benzene As Novel Electrolyte Additive for Silicon-Based Lithium-Ion Batteries.

Regulating the composition distribution of layered SEI film on Li-ion battery anode by LiDFBOP

Microscopic insights into effects of sulfolane additive on Li–S battery electrolyte

Comparative study of different lithium salts as electrolyte additives of Li/SiOx–Si–C half-cells for lithium sulfur batteries

Effects of Structural Substituents on the Electrochemical Decomposition of Carbonyl Derivatives and Formation of the Solid–Electrolyte Interphase in Lithium-Ion Batteries

Effect of LiBOB Content on Electrochemical Performance of Li–O2 Batteries

Poor Stability of Li2CO3 in the Solid Electrolyte Interphase of a Lithium‐Metal Anode Revealed by Cryo‐Electron Microscopy

Sulfolane‐Graphite Incompatibility and Its Mitigation in Li‐ion Batteries

Deconvoluting Effects of Lithium Morphology and SEI Stability at Moderate Current Density Using Interface Engineering

Influence of Carbonate Solvents on Solid Electrolyte Interphase Composition over Si Electrodes Monitored by In Situ and Ex Situ Spectroscopies

The origin of sulfuryl-containing components in SEI from sulfate additives for stable cycling of ultrathin lithium metal anodes

Effects of Electrolyte Solvent Composition on Solid Electrolyte Interphase Properties in Lithium Metal Batteries: Focusing on Ethylene Carbonate to Ethyl Methyl Carbonate Ratios

Effect of the Anionic Composition of Sulfolane Based Electrolytes on the Performances of Lithium-Sulfur Batteries

Stabilizing a Lithium Metal Battery by an In Situ Li 2 S-modified Interfacial Layer via Amorphous-Sulfide Composite Solid Electrolyte

Effect of Sulfites on the Performance of LiBOB/γ-butyrolactone Electrolytes

Effects of VC-LiBOB binary additives on SEI formation in ionic liquid–organic composite electrolyte