Abstract:Grafted inorganic nanoparticles can greatly improve the mechanical performance of polymers. To examine the effects of the interfacial characteristics generated by the grafting polymer bonded to nanoparticle surfaces, we chemically grafted nano-silica with different polymers and then melt-mixed it with polypropylene (PP). We extracted the homopolymers produced during the graft polymerization from the grafted products before the composites were manufactured to get rid of the side effects of the nongrafting polymers. We tailored the interfacial interaction between the grafted nano-SiO2 and PP matrix by changing the amount of the grafting polymers on the nanoparticles, that is, the grafting percentage. Mechanical tests indicated that all the composites incorporated with grafted nano-SiO2 particles possessed much higher impact strength than untreated SiO2/PP composites and neat PP. The greatest contribution of the particles was made at a low grafting percentage. Tensile measurements showed that the treated nanoparticles could provide PP with stiffening, strengthening, and toughening effects at a rather low filler content (typically 0.8 vol %) because of the enhanced interfacial adhesion resulting from molecular entanglement and interdiffusion between the grating polymers on the nanoparticles and matrix macromolecules. The presence of grafting polymers on the nanoparticles provided the composites with a tailorable interphase. The tensile performance of the composites was sensitive to the nature of the grafting polymers. Basically, a hard interface was beneficial to stress transfer, whereas a soft one hindered the development of cavities in the matrix. (C) 2004 Wiley Periodicals, Inc.

Interfacial Modification of Single-Walled Carbon Nanotubes for High-Loading-Reinforced Polypropylene Composites

Fabrication of High-Performance PP/Graphene Nanocomposites Via Friedel–Crafts

Effect of Polymer-Grafted Carbon Nanofibers and Nanotubes on the Interlaminar Shear Strength and Flexural Strength of Carbon Fiber/epoxy Multiscale Composites

Single-Walled Carbon Nanotubes Functionalized with High Bonding Density of Polymer Layers and Enhanced Mechanical Properties of Composites

Computational Analysis of Effect of Modification on the Interfacial Characteristics of a Carbon Nanotube–polyethylene Composite System

Enhanced Foamability Of Isotactic Polypropylene Composites By Polypropylene-Graft-Carbon Nanotube

Interfacial Effects in Polypropylene–silica Nanocomposites

Mechanical properties of in situ modified graphene nanosheets‐reinforced polypropylene

Mechanical Properties and Biocompatibility of Functionalized Carbon Nanotubes/polypropylene Composites

Preparation and Properties of Nano-Silica Filled Self-Reinforced Polypropylene

Interfacial enhancement of nano-SiO2/polypropylene composites

Wettability of Carbon Nanotube-Grafted Carbon Fibers and Their Interfacial Properties in Polypropylene Thermoplastic Composite

Surface modification of multiwalled carbon nanotubes via gliding arc plasma for the reinforcement of polypropylene

Tensile Performance Improvement of Low Nanoparticles Filled-Polypropylene Composites

Morphology And Properties Of Halloysite Nanotubes Reinforced Polypropylene Nanocomposites

Preparation and characterisation of polyurethane grafted single-walled carbon nanotubes and derived polyurethane nanocomposites

The Synergetic Effect of Zinc Phthalate and Carboxymethyl Cellulose – Carbon Nanotube of Glass Fibers Surfaces on Improving Strength and Toughness of Polypropylene Composite

Fabrication of Polypropylene/carbon Nanotubes Composites Via a Sequential Process of (rotating Solid-State Mixing)-Plus-(melt Extrusion)

Combined Effects of Stretching and Nanofillers on the Crystalline Structure and Mechanical Properties of Polypropylene and Single-Walled Carbon Nanotube Composite Fibers

Mechanical Properties and Morphologies of Polypropylene Composites Synergistically Reinforced-Toughened by Styrene–butadiene Rubber and Graphene Oxide Nanosheets

An Effective Surface Modification of Carbon Fiber for Improving the Interfacial Adhesion of Polypropylene Composites