Abstract:Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Ahead of Print. This paper proposes a validated procedure that can be used for development stage of model-based controller for heavy-duty electromechanical disc brakes. Firstly, system dynamics model of a single piston electromechanical disc brake is constructed in Matlab/Simulink environment in consideration of nonlinear friction model. To ensure the accuracy of system dynamics model, open loop measurements (clamping force, motor angle and motor current) are conducted on a prototype of single piston electromechanical disc brake. Experimental data is used for the determination of system variables. The predicted outputs are verified by comparison of experimental measurement results. For the control purpose of electromechanical brake, a multi-stage closed loop architecture is introduced. To regulate clamping force, PID and sliding mode controllers are developed in Matlab/Simulink in consideration of braking performance requirements for heavy-duty vehicles. For management of running clearance between brake disc and pad, PID position controller is developed in simulation environment. Those controller parameters obtained in the simulation process are introduced to the control hardware. After that closed loop clamping force and position measurements are conducted. When the rise time values of both clamping force controllers are compared, it is seen that sliding mode controller can reach to the settling point faster than PID controller. As for the position controller, the rise time requirement has been achieved by the designed PID controller. The switching process of force and position controllers are implemented and functional closed loop measurements are conducted for different reference input signals. It is seen from the results that the rise time requirement for position controller has been achieved. The system response of clamping force parameter is considerably stable.

Working Mechanism of Brake Unit on Railway Vehicle and Its Mbd Simulation Experiment

Research on Modeling and Load Simulation Algorithm of Tracked Vehicle Braking System on Mu-Split Road Surfaces

Simulation Research on Brake and Release Performances for the TMB60 Brake Equipment

Experimental Study on Air-Hydraulic Brake System

Study on Disc Brake Co-simulation for Motorcycle Braking Performance

Research on mumerical simulation LBM to train aerodynamic brake

Numerical simulation and experimental research on mechanical behaviour of hydraulic disc brakes based on multi-body dynamics

Simulation and experimental research of a new automotive electromechanical brake system

A trailer car dynamics model considering brake rigging of a high-speed train and its application

Design and Analysis of the Hybrid Excitation Rail Eddy Brake System of High-Speed Trains

Design and performance analysis of pneumatic disc brake of a new energy commercial vehicle

Simulation and Experimental Study of a New Electromechanical Brake with Automatic Wear Adjustment Function

Design and research of the disc brake of mine hoists for monitoring the disc spring force and positive brake pressure

Accuracy Improvement of Braking Force via Deceleration Feedback Functions Applied to Braking Systems

The Effect of a Variable Disc Pad Friction Coefficient for the Mechanical Brake System of a Railway Vehicle

Dynamic characteristics of disc brake systems of a high-speed train with wheel polygonal wear

System modeling, experimental validation and pressure estimation of the pneumatic braking system

Modelling and control of electromechanical disc brake for heavy-duty vehicles

Design and Performance Analysis of A Novel Regenerative Braking System for Electrified Passenger Vehicles

Simulation modeling of the automobile braking system performance

Research on Electronic Brake Force Distribution and Anti-Lock Brake of Vehicle Based on Direct Drive Electro Hydraulic Actuator