Abstract:To improve the permeate flux and to keep the advantage of the high thermal efficiency in air gap membrane distillation (AGMD) for desalination, the optimal design of countercurrent AGMD of the hollow fiber module (AGMD-HF) is proposed. The module is basically composed of hydrophobic porous fiber tubes for feed flow and nonporous tubes for cold flow. The set of mathematical model equations for the entire module is derived from rigorous mass, momentum, and energy balances of both the feed side and the cold side coupled with the simultaneous mass and heat transfer across the membrane. The temperatures across the membrane and along the length of the module are simulated. The sensitivity of the process performance to operating conditions along the fiber length is investigated over a range of temperature and the flow rate. It is found that in the AGMD-HF domain, air/vapor dominates the heat and mass transfer resistances, which are comparable with the available experimental results in the literature. An attempt is then made to adjust the packing density and the surface ratio of the hot porous fibers to the cold nonporous fibers in order to maximize the process performance. Based on the trade-off between productivity and the thermal efficiency under module parameters, optimal design of AGMD-HF using Pareto solutions and the genetic algorithm is finally carried out. The obtained optimal points show that productivity increases considerably at the cost of the higher thermal efficiency with the increase of both packing density of the module and the tube ratio of hot feed fibers to cold fibers, with the latter showing relatively complex effect.

Study on a new air-gap membrane distillation module for desalination

Numerical Simulation and Optimal Design of AGMD-Based Hollow Fiber Modules for Desalination

Study on the Heat and Mass Transfer in AGMD Module with Latent Heat Recovery

Enhanced air gap membrane desalination by novel finned tubular membrane modules

Experimental study of hollow fiber AGMD modules with energy recovery for high saline water desalination

New membrane distillation module based on hollow fiber AGMD desalination

Improving the Performance of the Air Gap Membrane Distillation Process by Using A Supplementary Vacuum Pump

Experimental and theoretical investigation on water desalination using air gap membrane distillation

Experimental Investigation of a High-Fluxair Gap Membrane Distillation System

New air gap membrane distillation module for desalination

Comparative Study of Air Gap and Permeate Gap Membrane Distillation Using Internal Heat Recovery Hollow Fiber Membrane Module

Research on the Performance and Computational Fluid Dynamics Numerical Simulation of Plate Air Gap Membrane Distillation Module

Modeling and Optimization of Air Gap Membrane Distillation System for Desalination

Experimental and simulation study of an air gap membrane distillation module with solar absorption function for desalination

Modeling and optimization of hollow fiber DCMD module for desalination

Effect of operating parameters and membrane characteristics on air gap membrane distillation performance for the treatment of highly saline water

Study On Heat And Mass Transfer Characteristics Of Agdd

Experimental and Numerical Investigations on Gas Injection-Enhanced Air Gap Membrane Distillation for Water Desalination

Comparison of hollow fiber membranes in direct contact and air gap membrane distillation (MD)

Simulation and experimental study of an AGMD membrane distillation pilot for the desalination of seawater or brackish water with zero liquid discharged

Spatial variations of DCMD performance for desalination through countercurrent hollow fiber modules