Abstract:To improve the permeate flux and to keep the advantage of the high thermal efficiency in air gap membrane distillation (AGMD) for desalination, the optimal design of countercurrent AGMD of the hollow fiber module (AGMD-HF) is proposed. The module is basically composed of hydrophobic porous fiber tubes for feed flow and nonporous tubes for cold flow. The set of mathematical model equations for the entire module is derived from rigorous mass, momentum, and energy balances of both the feed side and the cold side coupled with the simultaneous mass and heat transfer across the membrane. The temperatures across the membrane and along the length of the module are simulated. The sensitivity of the process performance to operating conditions along the fiber length is investigated over a range of temperature and the flow rate. It is found that in the AGMD-HF domain, air/vapor dominates the heat and mass transfer resistances, which are comparable with the available experimental results in the literature. An attempt is then made to adjust the packing density and the surface ratio of the hot porous fibers to the cold nonporous fibers in order to maximize the process performance. Based on the trade-off between productivity and the thermal efficiency under module parameters, optimal design of AGMD-HF using Pareto solutions and the genetic algorithm is finally carried out. The obtained optimal points show that productivity increases considerably at the cost of the higher thermal efficiency with the increase of both packing density of the module and the tube ratio of hot feed fibers to cold fibers, with the latter showing relatively complex effect.

Experimental and simulation study of an air gap membrane distillation module with solar absorption function for desalination

Enhanced air gap membrane desalination by novel finned tubular membrane modules

Numerical Simulation and Optimal Design of AGMD-Based Hollow Fiber Modules for Desalination

Experimental and simulation study of a solar thermal driven membrane distillation desalination process

An efficient and economic evacuated U-tube solar collector powered air gap membrane distillation hybrid system for seawater desalination

Simulation and experimental study of an AGMD membrane distillation pilot for the desalination of seawater or brackish water with zero liquid discharged

Optimal design and control of solar driven air gap membrane distillation desalination systems

Experimental Investigation on Floating Solar-Driven Membrane Distillation Desalination Modules

Economic Design of Solar-Driven Membrane Distillation Systems for Desalination

Experimental and theoretical investigation on water desalination using air gap membrane distillation

Computational fluid dynamics modelling and optimization of solar powered direct contact membrane distillation with localized heating for off-grid desalination

Modeling and optimization of hollow fiber DCMD module for desalination

Optimization Study of Small-Scale Solar Membrane Distillation Desalination Systems (s-SMDDS)

Experimental and Simulation Study of Solar-Powered Air-Gap Membrane Distillation Technology for Water Desalination

A novel solar-driven air gap membrane distillation system

An experimental review on coupling of solar pond with membrane distillation

Renewable water: Direct contact membrane distillation coupled with solar ponds

DYNAMIC SIMULATION OF AN AIR-GAP MEMBRANE DISTILLATION (AGMD) PROCESS USING PHOTOVOLTAIC PANELS SYSTEM AND FLAT PLATE COLLECTORS

Solar Energy Driven Membrane Desalination: Experimental Heat Transfer Analysis

Solar-Driven Thin Air Gap Membrane Distillation with a Slippery Condensing Surface

Performance enhancement of a hybrid multi effect evaporation/membrane distillation system driven by solar energy for desalination