Abstract:Biomass carbon-coated and pseudocapacitance-assisted α-Fe2O3 has recently gained more attention for enhanced lithium storage performance. Herein, we used a waste poplar branch as a biotemplate and a carbon source to prepare graphitic-C-doped mesoporous α-Fe2O3 (α-Fe2O3/C) through a simple immersion–carbonization–calcination method. The influence of carbon content on both the microstructures and electrochemical properties was also studied. The product calcined in air at 400 °C (Fe2O3/C400) presents a hierarchically tubular structure with cross-linkage of 18% graphitic-C and α-Fe2O3 nanoparticles with an average size of ∼28 nm. Meanwhile, the Fe2O3/C400 nanomaterial exhibits a large surface area of 114 m2 g–1 and mesopore size distribution centered at 2 nm. As lithium-ion battery anode material, such a unique hierarchical structure presents a certain pseudocapacitance behavior, thus improving its lithium storage performance. Electrochemical measurements show that the Fe2O3/C400 nanomaterial exhibits higher specific capacity and better rate performance. Especially, it can retain a capacity of 885 mA h g–1 at 1 A g–1 after cycling 1400 times, indicating good capacity retention and long-cycling stability. The good electrochemical performance mainly originates from the synergism of the unique microstructure of the Fe2O3/C400 nanomaterial, suitable doping of graphitic-C, and certain pseudocapacitance behavior. Thus, the low-cost bifunctional biotemplate strategy can provide a useful experience for the massive synthesis of pseudocapacitance-assisted high-performance anodes.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsanm.1c00649?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsanm.1c00649</a>.Material characterization, assembly and electrochemical test of half-cells; XPS spectra of Fe2O3/C450 (Figure S1); N2 adsorption–desorption isotherm and pore size distribution of Fe2O3/C450 (Figure S2); long-cycling discharge performance of the Fe2O3/C400 electrode at 3.0 A g–1 (Figure S3); TG curve in air, XRD pattern, and cyclic performance of Fe2O3/C400-1 h electrode at 1.0 A g–1 (Figure S4); Li+-ion diffusion coefficient (Figure S5); TEM images of Fe2O3/C400 and Fe2O3/C450 electrodes before and after cycling 1000 times (Figure S6); and comparison of long cycle performance of carbon-doped Fe2O3 composites (Table S1) (<a class="ext-link" href="/doi/suppl/10.1021/acsanm.1c00649/suppl_file/an1c00649_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Exceptional Rate Performance of Functionalized Carbon Nanofiber Anodes Containing Nanopores Created by (fe) Sacrificial Catalyst

Engineering Capacitive Contribution in Nitrogen-Doped Carbon Nanofiber Films Enabling High Performance Sodium Storage

Nitrogen-functionalized Microporous Carbon Nanoparticles for High Performance Supercapacitor Electrode

N-Doped Porous Carbon-Nanofiber-Supported Fe3C/Fe2O3 Nanoparticles as Anode for High-Performance Supercapacitors

Enhanced Rate Capability by Employing Carbon Nanotube-Loaded Electrospun Si/C Composite Nanofibers As Binder-Free Anodes

Porous FeP/C Composite Nanofibers As High-Performance Anodes for Li-ion/Na-ion Batteries

High-graphitization, Large-Surface Area, and Porous Carbon Nanofiber: A Superior Bi-Functional Electrode for Vanadium Redox Flow Battery

Electrochemical Performance of Fulvic Acid-Based Electrospun Hard Carbon Nanofibers As Promising Anodes for Sodium-Ion Batteries

Carbon nanofibers (CNFs) supported cobalt- nickel sulfide (CoNi2S4) nanoparticles hybrid anode for high performance lithium ion capacitor

N-doped Graphitized Carbon-Coated Fe 2 O 3 Nanoparticles in Highly Graphitized Carbon Hollow Fibers for Advanced Lithium-ion Batteries Anodes

Carbon Nanofibers: Synthesis, Characterization, and Electrochemical Properties

Designing a carbon nanofiber-encapsulated iron carbide anode and nickel-cobalt sulfide-decorated carbon nanofiber cathode for high-performance supercapacitors

Improved Electrochemical Performance of Porous Fe3o4/Carbon Core/Shell Nanorods As an Anode for Lithium-Ion Batteries

Ultra-high rate and ultra-stable lithium storage enabled by pore and defect engineered carbon nanofibers

Enhanced High-Rate Capability and Long Cycle Stability of FeS@NCG Nanofibers for Sodium-Ion Battery Anodes.

Facile Preparation of Mn3O4-coated Carbon Nanofibers on Copper Foam As a High-Capacity and Long-Life Anode for Lithium-Ion Batteries

Exceptional electrochemical performance of freestanding electrospun carbon nanofiber anodes containing ultrafine SnOx particles

Co@N-Doped Carbon Frameworks Anchored on Graphene as High-Rate and Long-Lifespan Anode Materials for Advanced Li-Ion Hybrid Capacitors

Graphitic Carbon-Doped Mesoporous Fe 2 O 3 Nanoparticles for Long-Life Li-Ion Anodes

Fe, Ni doped carbon nanofibers as dual functional electrocatalyst prepared by in-situ grown SiO 2 -protected in nanoconfinement

Correlation Between Atomic Structure and Electrochemical Performance of Anodes Made from Electrospun Carbon Nanofiber Films