Abstract:Permanent-magnet synchronous generator (PMSG) are used widely in wind turbine applications. The performance analysis of PMSG can be enhanced by adopting a number of control mechanisms with the benefit of advanced optimization techniques. Renewable energy is harnessed from continuously replenishing natural processes. Some commonly known are sunlight, water, wind, tides, geothermal heat and various forms of biomass. The focus on renewable energy has over the past few decades intensified greatly. This paper presents modeling and control strategy for the grid connected wind turbine system based on Permanent Magnet Synchronous Generator (PMSG). The considered system is based on back-to-back converter topology. The Grid Side Converter (GSC) achieves the DC bus voltage control and unity power factor. The Machine Side Converter (MSC) assures the PMSG speed control. The PMSG is used as a variable speed generator and connected directly to the turbine without gearbox. The pitch angle control is not either considered in this study. Further, Optimal Tip Speed Ratio based MPPT control strategy is used to ensure the most energy efficiency whatever the wind speed variations. A filter (L) is put between the GSC and the grid to reduce current ripple and to improve the injected power quality.During grid faults, a hierarchical coordinated control scheme for the generator-side converter, main grid-side converter and auxiliary grid-side converter, depending on the grid voltage sags, is presented to enhance the low voltage ride through (LVRT) capability of the direct-driven PMSG WT.

Control of a Grid-Connected Direct-Drive Wind Energy Conversion System

Modeling and control of the wind turbine with the Direct Drive Permanent Magnet Generator integrated to power grid

Small Signal Stability Analysis and Control of the Wind Turbine with the Direct-Drive Permanent Magnet Generator Integrated to the Grid

PWM Modulation Methods of PWM Rectifiers in WECS

A Survey on Model Predictive Control of DFIGs in Wind Energy Conversion Systems

Repetitive Control of the Stator-Side Four-Leg Converter in Stand-Alone Dfig-Based Wind Energy Conversion System

Novel DC Grid Connection Topology and Control Strategy for DFIG-based Wind Power Generation System

Dual Stator Windings PMSG Fed by Half-Controlled Converters for Wind Power Application

Independent Operation of DFIG-Based WECS Using Resonant Feedback Compensators under Unbalanced Grid Voltage Conditions

Enhanced Control of DFIG-used Back-to-back PWM VSC under Unbalanced Grid Voltage Conditions

Unit Power Factor Control of Direct-Drive Permanent Magnet Wind Generator

Coordinated control strategy of DFIG for balanced currents and constant torque during grid voltage unbalance

Enhanced operation for DFIG-based WECS using resonant feedback compensators under grid unbalance

Research on Direct-drive Wind Generation Power Converter Control Without PMSG Parameters

A novel control strategy of wind turbine MPPT implementation for direct-drive PMSG wind generation imitation platform

A Power Conversion System for PMSG-based WECS Operating with Fully-Controlled Current-Source Converters.

Improved control strategy of DFIG-based wind power generation systems connected to a harmonically polluted network

Coordinated Control of DFIG System Based on Repetitive Control Strategy under Generalized Harmonic Grid Voltages

Energy-Based Coordinated Control of Wind Energy Conversion System with Dfig

Analysis and Performance Of Grid Connected Straight Driven Pmsg Based Wind Turbines

Development of constant switching frequency model predictive control for DFIG-based wind energy conversion system in standalone and grid connected operation