Abstract:In recent years, traditional masonry structures have been widely used in rural areas of China. However, they were found to have a poor seismic performance during earthquakes. In this study, a new prestressing technology was proposed and described in detail, and it was used in fully grouted concrete masonry wall systems to improve its seismic performance. The experimental work involved investigating the seismic response of four fully grouted reinforced concrete masonry wall systems, consisting of two symmetrically arranged reinforced block masonry walls, with different section types and prestressing technologies, when subjected to cyclic lateral force. Based on the test results, a flexure and ductile failure occurred in the specimens with a rectangular section, while a shear and brittle failure occurred in the specimens with a T-shape section. The prestressing technology had no significant effect on the failure state of the specimens, but it influenced the crack propagation, making cracks fine and densely covered. A symmetrical and obvious pinching effect was observed in the hysteretic response of all specimens. The average displacement ductility of the specimens varied within a range of values between 3.34 and 6.92, according to the section type of the specimens, and the prestressing technology improved the displacement ductility of the specimens. Moreover, the prestressing technology significantly improved the initial stiffness of the specimens, and the specimens with prestressing technology experienced a greater fall in the degradation of the normalized stiffness than the specimens without this technology throughout the loading process. In addition, the equivalent viscous damping of the specimens ranged between 8.2% and 10.8%, according to the section type. It could be concluded that the prestressing technology improved the energy dissipation of the specimens at the ascending stage, although it had no marked influence on the equivalent damping ratio of the specimens.

Experimental Study on Self-Centering Concrete Wall with Distributed Friction Devices

Seismic Behavior of Composite Shear Walls Incorporating Concrete-Filled Steel and FRP Tubes As Boundary Elements

Experimental Study on Self-Centering Link Beams Using Post-Tensioned Steel-Sma Composite Tendons

Experimental Investigation on the Seismic Behavior of a New Self-Centering Shear Wall with Additional Friction

Experimental Investigation Of Self-Centering Hybrid Concrete Shear Walls Subjected To Horizontal Cyclic Loading

Hysteretic behavior and parametric studies of a self-centering shear wall with tension-compression disc spring devices

Design and experimental verification of disc spring devices in self‐centering reinforced concrete shear walls

Performance study of precast reinforced concrete shear walls with steel columns containing friction-bearing devices

Post-earthquake Performance and Damage Evaluation of Self-Centering Shear Wall with Replaceable Devices

Experimental Study of Seismic Performance of an Innovative Low-Damage Self-Centering Composite Steel Plate Shear Wall

Collapse fragility analysis of self-centering precast concrete walls with different post-tensioning and energy dissipation designs

Experimental Study on Mechanical Property of a New Type of Sandwich Wall

Development and experimental verification of self-centering shear walls with disc spring devices

Cyclic response of a self-centering RC wall with tension-compression-coupled disc spring devices

Seismic Behavior on Cross Bore Chain Block Dry Walls Confined Concrete Frame

Seismic demands of structural and non-structural components in self-centering precast concrete wall buildings

Seismic Behavior of Cfst-Enhanced Steel Plate-Reinforced Concrete Shear Walls

Experimental Investigation Into The Seismic Performance Of Fully Grouted Concrete Masonry Walls Using New Prestressing Technology

Seismic behavior of composite shear walls incorporating high-strength materials and CFST boundary elements

Experimental investigation and seismic response behavior of a self-centering precast concrete frame with hysteretic dampers

Experimental and theoretical study on seismic behavior of a new UHPFRC sandwich wall and wall-wall joint